Tender For Restoration Work Of Bighapur Scape From Km 0.000 To Km 7.681 And Laying Of Pavement On Service Road In Unnao District.
Tender Value
1.90 Crore
Estimated cost
Bid Submission
13 Jul 2026
2 days left
EMD
3.80 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Unnao → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Work Of Bighapur Scape From Km 0.000 To Km 7.681 And Laying Of Pavement On Service Road In Unnao District.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-Jul-2026 | Corrigendum due to change in Unit | Other | 13-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning thick jungle and thorny bushes without uprooting Above 100 Upto 500 cusec |
| 2 | Earth work in Restoration of escape By Machanical Equipment (poclain) with dressing |
| 3 | Earth filling in making daula and berm with manual compaction, dressing by any means lead up to 30m lift upto 1.50m as per drawing and direction of Engineer in charge |
| 4 | Scrapping existing internal section cutting and filling upto 8 cm. |
| 5 | videography and photography of escape before work, during work and after completion of work by DRONE including providing pen drive and vehicle for movement as per direction and engineer-in-charge. |
| 6 | First Class brick work in 1:4 cement and fine sand of 1.25 F.M. mortar in the super-structure including necessary cutting and moulding of bricks as required and also including honey comb brick, work thickness of wall not to be less than 11/2 brick thick, including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 7 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) brought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage & over lapping & hooks. |
| 8 | R.C.C. work with cement approved coarse sand and 2 cm. (3/4\\") gauge approved stone ballast in the proportion of 1:1-1/2:3 for the R.C.C. columns excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and T&P etc. required for proper completion of the work binding wire cost being included in the item. As in item no. 283 but on R.C.C. columns in 1:1-1/2:3 Rate as in item No. 288 above. |
| 9 | 12 mm. thick plaster with cement mortar in proportion of 1:4 cement & fine sand of 1.25 F.M. |
| 10 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied ) |
| 11 | Supply and Fabrication of M.S. channel, steel gate manufactured with 8mm thick plate with frame of channel including all cost of material,labour, T&P etc complete . |
| 12 | Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand, 6 graded stone ballast 40 mm nominal size ) including supply of all material labour and t&p etc required for proper completion of work and curing complete also including cost of fram work in foundation and floors. |
| 13 | Construction of Subgrade with Material Obtained from Available Land (For Local Earth Work) Construction of embankment with approved material obtained from available land as permitted and approved by Engineer-in-Charge and as per Technical Specitaion Clause 301.3.4.1, with all lifts and leads, spreading, grading to required slope and compacting to meet requirement of Tables 300.1and 300.2 as per Technical Specification clause 301.5 |
| 14 | Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 09, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 13, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender