Tender for Tender for Repair And Painting Work For The Office Buildings Of The Deputy Director (Administration And Marketing) And Deputy Director (Construction), The Boundary Wall, And The Toilets/Bathrooms Within The Office Buildings And Rooms
Tender Value
9.30 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
17 days left
EMD
93000
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting Work For The Office Buildings Of The Deputy Director (Administration And Marketing) And Deputy Director (Construction), The Boundary Wall, And The Toilets/Bathrooms Within The Office Buildings And Rooms
BOQ
| Sl. No. | Item Description |
| 1 | Scraping old white or colour wash including disposal of refuse as directed by the Enginner in charge with in a 60mt SI NO 708 |
| 2 | Dismentling of existing plaster including disposal of refuse as directed by E / I .(S.I.No-706) |
| 3 | 12 mm thick plaster with cement and appro- -ved coarse sand mortar in 1:4 over brick 1 cm including supply of all materials, labour T & P etc. required for proper completion of the work. SI NO 584A |
| 4 | Providing wall putty with approved quality material of beager/ J.K. birla or similar make 2 coat SI NO 662 New item |
| 5 | Providing wall putty on old surface with approved quality material of beager/ J.K. birla or similar make 2 coat SI NO 662 New Item |
| 6 | Finishing wall with two coat of weather coat of approved quality on superviously surface with this paint give an even shade including supply of all materials labour T&P etc si. New Item page no 23 |
| 7 | Distempering ( Two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even cement primer of approved brand and manufacture such as berger, J&N shalimar,asian paint after thoroughtly brushing the surface free from mortar dropping and other foreign matter and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all mateirals lobour tools & plants etc. required for proper completion of the work. si no 649+650 |
| 8 | Supply and fixing Galvanized Mosquitos proof heavy quality S.S Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm x 1cm. (3''x3/8'') flat iron 25 mm x 4mm and including supply of necessary screws all materials, labour, Tools & Plants etc. required for proper completion of the work. SI No 455 |
| 9 | Supply and fixing 32 mm. thick Commercial flush door shutters conforming of I.S. 2202 Part-1(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles and springs (excluding cost of fitting) SI No. 471(A) |
| 10 | Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) SI No 473 |
| 11 | Painting or varnishing work in small areas or new wood work withone coat (upto one square metre) ready mixed priming paint and 2 coat of superior quality ready mixed paint or varnish including supply of all materials. Labour tools & plants etc required for proper completion of the work paint to be used should confirm the ISI no 103-1950 S.I.No. 641+642 |
| 12 | Painting or varnishing Two Coat on Previously Painted old wooden or iron work including supply of all materials. Labour tools & plants etc required for proper completion of the work paint to be used should confirm the S.I.No.642+643 |
| 13 | M-150 brick work in 1:4 cement and c. sand mortar for one brick thick wall in superstructure including supply of all materials labour T&P etc. required for proper completion of the work si no 305A + 310 +310a(4600+210+255) |
| 14 | Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White glazed earthen ware (Indian type)/Neycer W.C Pn 580 mm Dia.SI No 21.12 |
| 15 | Provding and fixing one piece construction white vitreous china squatting plat with an integral longitudinal flushing pipe, white PVC automatic flushing cistern, with fittings, standard size G.I./PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I. Clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required. Single squatting plate with 5 litre P.V.C automatic flushing cistern (21.15)04 |
| 16 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350 mm and 340x410x265 mm size respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required S.I No. 21.13 |
| 17 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked (Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. SI No 21.11 |
| 18 | Providing and fixing wash basin with C.I brackets] 15 mm CP brass pillar taps, 32 mm C.P brass waste of standard pattern, Including painting of fitting and brackets, cutting and making good the walls wherever require. White Viterous China was basin size 630x450 mm with a pair of 15 mm C.P brass pillar taps Si No 21.16 |
| 19 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required.Kitchen sink with drain board510x1040 mm bowl deepth 200 mm (21.18.3) |
| 20 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. SI No 21.25 |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stablity for hot & cold water supply, Including all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed Work, including cutting chases and making good the wall etc. 15 mm dia pipe SI No 21.02 |
| 22 | 20 mm dia pipe |
| 23 | 32 mm dia pipe |
| 24 | Providing and fixing C.P. Brass bib cock of approved quality confirming to Is 8931 SI No 21.07 |
| 25 | Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. SI 21.04 B 15 mm nominal bare (a) SI No 21.05 |
| 26 | 20 mm nominal bare (b) |
| 27 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, Including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. SI 730 (a) |
| 28 | Renewing panes of glass in door, window & ventilators or fixing in the new work with 3 mm, thick glasspanes fixed with brads & putty including supply of all materials, labour, tools & Plants, required for proper completion of work. SI No Bulandshahr SI NO 806 (CH 21) |
| 29 | Supply and fixing white glazed tiles in wall includin supply of all material labour T&P require of work as per direction of E/C SI No. 628 |
| 30 | Supply and fixing 6mm (1/4\\") china white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and tools and plants. SI NO 628 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender