Defence Statutory Bodies & Commissions/Committees Closing in 11 days TDR #56321041

Tender For Enchancement Of Capacity Of Existing Transformer From 100 Kva To 160 Kva To Bear Addl Load Of Cold Storage (Meat Frozen) Under Ge Saugor

Issued by Statutory Bodies & Commissions/Committees · Sagar, Madhya Pradesh
Tender Value
9.40 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
11 days left
EMD
18800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Enchancement Of Capacity Of Existing Transformer From 100 Kva To 160 Kva To Bear Addl Load Of Cold Storage (Meat Frozen) Under Ge Saugor

BOQ

Name of Work:- ENCHANCEMENT OF CAPACITY OF EXISTING TRANSFORMER FROM 100 KVA TO 160 KVA TO BEAR ADDL LOAD OF COLD STORAGE (MEAT FROZEN) UNDER GE SAUGOR
Sl. No. Item Description
1Taking down existing 100 KVA transformer and shifting into MES substation yard complete all as specified and as directed.
2Supplying, fixing, installing, commissioning and testing transformer step down as per IS:1180 (Part-1) -2014, 11/0.433KV, level 3 ,copper wound, outdoor type, 3 phase, of capacity 160 KVA, 4 wire, 50 cycles per second, oil immersed, ONAN naturally cooled connected with delta on HT side and star on LT side, LT side to vary secondary voltage + 7.5% in three steps of 2.5% each with standard fittings/fixture . Bushing at HT/LT side with neutral brought out complete with first fill of transformer oil to appropriate level, temp gauge, breather tank cooling coil, HT/LT side cable to be fitted with suitable size of thimble/lugs complete all as specified and as directed.(Outdoor Type Pole Mounted)
3Taking down old cross arms ,bracing etc .& Supply and fixing cross arms, bracing, supports, clamps and back plate fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed inclusive of one primer coat, one under coat and one finishing coat of paint including taking down old cross arms etc complete all as specified and directed.
4Taking down old unserviceable GOD & S & F gang operated air break switch with DO fuse assembly, three poles, outdoor type, nominal system voltage 11 KV, rated voltage 12 KV, rated normal current 200 Amps, rated frequency 50 Hz, rated one minute power frequency withstand voltage between (i) earth & poles 28 KV (rms) (ii) across the isolating distance 32 KV (rms), rated lightning impulse withstand voltage (i) to earth and between poles 75 KV (Peak) (ii) across the isolating distance 85 KV (Peak), Rated short-time withstand current 25 KA for 3 seconds, rated peak withstand current 63 KA for climatic conditions at the site, mechanically operated mounted on insulator and steel frame with operating mechanism worked from ground level for current including taking down old AB switch complete all as specified and as directed.
5M&L for earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick, burried directly in ground,earth pit not less than 2.25 meter deep below ground level with top edge of earth plate not less than 1.5 meter below ground level, steel earth plate connected with 32x6 mm GI strip by means of bolts, nuts, check nuts and washer of galvanised iron or steel as shown in electrical plate No. 3 connected to earth test point all as described in MES schedule part II including excavation earth work concreate pit with 50 mm thick RCC cover in RCC 1:2:4 type B-I duly reinforced with MS bars 6 mm dia @ 150 C/C both ways and pit chamber in PCC 1:2:4 type B-I with 2 Nos suitable lifting handles of 12 mm MS bar and GI protection pipe of suitable size,and watering pipe 20 mm dia with water funnel test point and extra length up to 7.5 meter connected to Panel board all as specified and directed. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department.
6M&L for earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick, burried directly in ground,earth pit not less than 2.25 meter deep below ground level with top edge of earth plate not less than 1.5 meter below ground level, steel earth plate connected with 4mm GI wire by means of bolts, nuts, check nuts and washer of galvanised iron or steel as shown in electrical plate No. 3 connected to earth test point all as described in MES schedule part II including excavation earth work concreate pit with 50 mm thick RCC cover in RCC 1:2:4 type B-I duly reinforced with MS bars 6 mm dia @ 150 C/C both ways and pit chamber in PCC 1:2:4 type B-I with 2 Nos suitable lifting handles of 12 mm MS bar and GI protection pipe of suitable size,and watering pipe 20 mm dia with water funnel test point and extra length up to 7.5 meter connected to Panel board all as specified and directed. Note :- If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56321041
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 9.40 Lakhs
LAST DATE 18-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Enchancement Of Capacity Of Existing Transformer From 100 Kva To 160 Kva To Bear Addl Load Of Cold Storage (Meat Frozen) Under Ge Saugor
Basic Detail
Tender No 84263/E8
Bidding Type Tender
Location
City Sagar
State Madhya Pradesh
Key Dates
Publish Date 06 Jul 2026
Submission Date 18 Jul 2026
Open Date 20 Jul 2026
Finance
Tender Value 9.40 Lakhs
Tender Fee 500
EMD 18800
Exemption Available
Document List
3d5fb42e-d4e5-4820-af98-0ac7acf0e815.html
84263TenderDocuments.pdf
BOQ_869746.xls
Tendernotice_1 (2).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Jul 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
html

3d5fb42e-d4e5-4820-af98-0ac7acf0e815.html

pdf

84263TenderDocuments.pdf

xls

BOQ_869746.xls

pdf

Tendernotice_1 (2).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders