Tender For Repairto Roof Leakage, Sunken, Tank Cleaning And Other Connected Items In Md Accn Other Than Map Accn Under Age B/R-Ii Of Ge Gwalior.
Tender Value
48 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
14 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairto Roof Leakage, Sunken, Tank Cleaning And Other Connected Items In Md Accn Other Than Map Accn Under Age B/R-Ii Of Ge Gwalior.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position (Un-reinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directedNote:Demolition material throughout MOD Land rate include above item . |
| 2 | Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note:Demolition material throughout MOD Land rate include above item |
| 3 | M & L PCC (1:2:4) Type B0 (using 12.5 mm graded stone aggregate) as in pan, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided for in water troughs and the like including weathering, slightly rounded or chamfered angle over roof ,surface finished even and Smooth mixed with water proofing compond complete all as speceified and directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as \\"supply only \\" |
| 4 | M & L for PCC 1:2:4 Type B1 (Using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges/copping etc finished even and smooth complete all as specified and directed. |
| 5 | M&L for apply the non snrink high mechnical strenght properties epoxy based morter @ 5 kg/RM on all corner joints of wall to prevent the capillari formation from wall to roof area, by component system comprising of base. Hardener and quartz filler having ER base and Hardener with Quartz filler etc complete all as specified and directed. |
| 6 | M &L for applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.3 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed. |
| 7 | M&L one coat of aluminium bituminous paint over polymetric membrane complete all as specified and as directed. |
| 8 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 9 | M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 10 | M&L, precast cement concrete tiles of size 250mm x 250mm x 20 to 22 mm as in foor top ,confirming to IS-1237 laid over & including 15 mm thick screed bed in CM 1:4 and set, jointed and pointed in neat cement slurry in floors, and cut & plished between tiles 2 to 3 mm will be filled with cement mortar (1:2) by mixing of chemical or equilant approved by the GE etc complete all as specified and as directed. |
| 11 | M & L for applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete all as specified and as directed. Notes:(1) The work shall be executed through authorised applicator of manufacturer only.(2) Authrised Applicator shall be approved by GE before starting of work.(3) All materials shall be procured directly form manufacturer. (4) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. |
| 12 | Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 13 | M&L, brick work with sub class ‘B’ bricks (old size), straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed |
| 14 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down wih water, etc complete all as specified and as directed |
| 15 | M&L for 12 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 16 | M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed. |
| 17 | Taking up or down 20mm bore steel tubing and connections including cleaning for refixing removing from site complete all as specified and as directed. |
| 18 | Taking up or down 25 mm bore steel tubing and connections including cleaning for refixing removing from site complete all as specified and as directed. |
| 19 | supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed |
| 20 | supply and laying 25mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed |
| 21 | S&F 20mm dia bore Galvanised tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed |
| 22 | S&F 25mm dia bore Galvanised tubing medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 23 | Dismantling of water tanks exc 250 ltr and n.exc 500ltr capacity and removing from site complete all as specified and as directed. |
| 24 | Dismantling of water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed |
| 25 | S&F Rotational moulded poly-ethylene double layered antibactrial film tanks (cylinderical vertical ) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed. |
| 26 | S&F Rotational moulded poly-ethylene double layered antibactrial film tanks (cylinderical vertical ) 1000 litres capacity, white colour hoisted and fixed in position complete all as specified and directed. |
| 27 | S&F 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed 20mm dia of pipe . (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 28 | Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and reconnecting and refixing in position capacity of tank exc 250 and n.exc 500 ltr. (cleaning, repairing etc measured separately) complete all as specified and as directed. |
| 29 | Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and reconnecting and refixing in position capacity of tank exc 500 and n.exc 1000 ltr. (cleaning, repairing etc measured separately) complete all as specified and as directed. |
| 30 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank exc 250 ltrs but n.exc 500 Ltrs complete all as specified and as directed. |
| 31 | Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank exc 500 ltrs but n.exc 1000 Ltrs complete all as specified and as directed. |
| 32 | S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm dia of pipe . (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 33 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 34 | Taking down eaves gutters and rain water pipes (any size 150 mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 35 | S&F for 150mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed. |
| 36 | S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed. |
| 37 | S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed. |
| 38 | S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and as directed. |
| 39 | S&F for 150mm dia PVC(SWR)pipes bends any radious complete all as specified and as directed. |
| 40 | S&F for 110mm dia PVC(SWR)pipes bends any radious, complete all as specified and directed. |
| 41 | S&F for 75 mm dia PVC(SWR)pipes bends any radious.complete, complete all as specified and directed. |
| 42 | S&F for 150mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious complete all as specified and directed. |
| 43 | S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious complete all as specified and directed. |
| 44 | S&F SWR pipe Access door bend 75mm/ 110mm complete all as specified and directed. |
| 45 | S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 46 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for fixing of rain water pipe conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 47 | S&F in repairs 15mm, pillar taps fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and as directed. |
| 48 | S&F in repairs 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and as directed. |
| 49 | S&F in repairs 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair and complete all as specified and as directed. |
| 50 | S&F in repairs for shower rose brass chromium plated without swivel joints, 125mm size including fixing to steel pipe complete all as specified and directed fixed. |
| 51 | S&F in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed. |
| 52 | S&F in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. |
| 53 | S&F in repairs Health Faucet with one meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed. |
| 54 | S&F in repairs for wall mixer with Two in one pattern in of brass CP, complete all as specified and directed. |
| 55 | S&F Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges complete all as specified and directed. |
| 56 | S&F in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed. |
| 57 | S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. |
| 58 | S&F in repairs for peg set of six aluminium fixed to wall with PVC plugs and screw, complete all as specified and directed. |
| 59 | Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 60 | S&F in repair Flushing jet Spray (chromium plated) for padestral pattern EWC including 1.00 metre tube flexible pipe and brass chromium plated nuts completed all as specfied and directed |
| 61 | S&F in repair 15mm dia 2 Way Chromium plated angle cock of with flange Complete all as specified and directed |
| 62 | S&F in repairs mild steel Chromium plated grating 100 mm dia, complete all as specified and directed. |
| 63 | S&F in repair sinks with drainage board made out of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed . |
| 64 | S&F for plate rack of size 3'X2.5' made out of .90 mm thick stainless steel of wire type / sheet pattern size and type as directed and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed. |
| 65 | S&F sinks made out of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 66 | S&F in repairs 600mmx450mm of size bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 67 | S&F 5mm thick, 600mm wide rounded edge mirror of selected quality glass, with back polishig mounted and fixed with stainless steel decorative cap wahsers and screws set fixed on PVC rawl plugs complete all as specified and directed. |
| 68 | S&F in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed. |
| 69 | S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed. |
| 70 | M&L in repairs for vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and directed. |
| 71 | S&F in repairs of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling ,32mm dia waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly. |
| 72 | S&F in repairs of vitreous china wash basin, white, oval type, of size 550 x 400mm Including waste coupling ,32mm dia waste pipe and labour for fixing pillar tap, PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly. |
| 73 | S&F in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. |
| 74 | S&F corner glass shelf 300mm ( with ABS Bracket ) complete all as specified and directed. |
| 75 | S&F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and directed |
| 76 | S&F 25mm dia stainless steel curtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed by Engr in Charge |
| 77 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as required complete all as specified and as directed. |
| 78 | Taking down chowkhat or frame (without taking off shutter from the frame) size exceeding 1.5 sqm and not exc 4.00 sqm each, removing from the site Cutting holes of size exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as required complete all as specified and as directed. |
| 79 | Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed. |
| 80 | S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 81 | S&F for stainless steel butt hinges of 100mm size complete all as specified and directed. |
| 82 | S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified and directed. |
| 83 | S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and directed. |
| 84 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 85 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 86 | S&F 4.00 mm thick tinted glass of selected quality in square size not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 87 | S&F 4.00 mm thick tinted glass of selected quality in square size exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 88 | S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290,E-165 , complete all as specified and directed. |
| 89 | M&L for applying two coats of synthetic enamel paint including Preparation of new Steel surface over 10 cm width or girth comlete all as specified and directed . |
| 90 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 91 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 92 | Demolition of concrete of any description and in position not otherwise specially provided for complete all as secified and directed. |
| 93 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile size exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick cement screed in CM (1:6 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 94 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile size exceeding 0.18 sqm but not exceeding 0.38 sqm, as in skirting fixed over and including 10 mm thick cement screed in CM (1:4 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 95 | M&L for digital glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed. |
| 96 | M&L for non skid ceramic Coloured tiles of size 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed. |
| 97 | M&L Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed. |
| 98 | M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate) as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected |
| 99 | M&L for PCC 1:4:8 Type D2 (using 40mm graded stone aggregate) as in foundation filling mass concrete, complete all as specified and directed. |
| 100 | M & L PCC 1:2:4 Type B0 (using 12.5 mm graded stone aggregate) as levelling course/mass concrete complete all as specified and directed. |
| 101 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 102 | M&L for 10 mm thick rendering in CM (1:3) over floor/wall ,surface finished even and Smooth mixed with water proofing compond complete all as speceified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as \\"supply only \\" |
| 103 | M&L Plain cement concrete 1:5:10 type E2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed. |
| 104 | M&L for Two or more coats of Epoxy (hardener and raisner ) Coating over primer over new prepared wall/ floor surfaces complete as in sunken portion complete all as all as specified and as diected. |
| 105 | Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed. |
| 106 | Material and labour for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed. |
| 107 | Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of oil .emulsion complete all as specified and directed |
| 108 | Dismantling of stone of any description or thickness built in cement mortar and pointed in any mortar complete all as specified and directed. |
| 109 | Demolition of concrete/stone beams of any description and in position not otherwise specially provided for complete all as secified and directed. |
| 110 | Removing debrie/PCC obtained from item No 109 above (other than soil payble under item 3028 to 3031 in section 3 Earthwork ) to a distance of exc 1 Km or under beyond the lead include in the rates, including loading and unloading tacking comlete all as specified and directed.Note : stone slab and stone beams have need considered in this item |
| 111 | S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed. |
| 112 | S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut toor dinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W (Gde-E-250) Quality-A) complete all as specified and directed. |
| 113 | M & L for preparation of new steel surfaces and applying two coats of synthetic enamel (ordinary tint) over a coats of primer complete all as specified and directed. |
| 114 | M&L for cutting chases, pinning in, Stone concrete block or slab wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed for roof sheet. And making good,cutting exceeding 20cm girth complete all as specified and directed. |
| 115 | M & L for Cutting holes into or but in stone walls built in cement mortar or cement lime mortar and walls of cement concrete built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) exc 400 sq. cm but n exc 0.10 sqm as required complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender