Tender For Repair/Replacement Of Internal Point Wiring And Fittings Of Various Locations Of Domestic Area At annual rate contract Charbatia Under Ge (I) (Cg) Bhubaneswar
Tender Value
40 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Internal Point Wiring And Fittings Of Various Locations Of Domestic Area At annual rate contract Charbatia Under Ge (I) (Cg) Bhubaneswar
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully aluminium/copper point wiring any type including batten/casing caping for light/ fan/bell/socket or power and including unscrewing from board, fitting and fixure such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 2 | Material and labour for point wiring for light point or fan Point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade IS694-1990 controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through PVC conceal conduit medium grade of size 20mm with all accessories on wall/floor/ceiling etc with 16G MS pressed steel terminal box with 3mm thick laminated sheet cover for mounting of fittings like switch, socket and fan regulator complete and making good the disturbed surafce complete all as specified and directed. |
| 3 | Ditto as item No.2 but for bell point controlled by one bell push switch |
| 4 | Ditto as item No.2 but for One 3 pin socket outlet 5/6 Amps, on the independent board. |
| 5 | Ditto as item No.2 but fo One 3 pin socket outlet 5/6 Amps, on the same board with other switches |
| 6 | All as per item No. 2 above but with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade for one 3 pin 15/16 Amps socket out let controlled by one switch on independent board. |
| 7 | Material and labour for point wiring for light point or fan point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade IS694-1990 controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through existing PVC/metallic conceal conduit complete and making good the disturbed surafce complete all as specified and directed. |
| 8 | Ditto as item No.8 but for bell point controlled by one bell push switch. |
| 9 | Ditto as item No.8 but for One 3 pin socket outlet 5/6 Amps, on the independent board. |
| 10 | Ditto as item No.8 but for One 3 pin socket outlet 5/6 Amps, on the same board with other switches |
| 11 | All as per item No. 8 above but with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade for one 3 pin 15/16 Amps socket out let controlled by one switch on independent board. |
| 12 | Material and labour for point wiring for light point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade IS 694-1990 controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing capping medium grade of size 20mm with all accessories on wll/floor/ceiling etc with 16G MS pressed steel terminal box with 3mm thick laminated sheet cover for mounting of fittings like switch, socket and fan regulator and making good the disturbed surafce complete all as specified and directed. |
| 13 | Ditto as item No.2 but for bell point controlled by one bell push switch |
| 14 | Ditto as item No.14 but for One 3 pin socket outlet 5/6 Amps, on the independent board. |
| 15 | Ditto as item No.14 but fo One 3 pin socket outlet 5/6 Amps, on the same board with other switches |
| 16 | All as per item No. 14 above but with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade for one 3 pin 15/16 Amps socket out let controlled by one switch on independent board. |
| 17 | S & F in replacement switch piano, flush type, single pole one way 5/6 Amp complete all as specified and directed. |
| 18 | S & F in replacement switch piano 15/16 Amp flush type complete all as specified and directed. |
| 19 | S & F in replacement socket outlet 5/6 Amp flush type complete all as specified and directed. |
| 20 | S & F in replacement socket outlet 15/16 Amp flush type complete all as specified and directed. |
| 21 | S & F in replacement switch socket combination 2 in 1, 3/5 pin 5/6 Amp flush type complete all as specified and directed. |
| 22 | S & F in replacement switch socket combination 5 in 1 but 5/16A, flush type complete all as specified and directed. |
| 23 | S & F in replacement stepped type electronic fan regulator flush type for ceiling fan on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 24 | M & L for ceiling rose PVC/Polycarbonate, isolated body 63.5 x 23.5mm 3 terminals complete all as specified and directed. |
| 25 | S & F in replacement bell push flush type, 5/6 Amp complete all as specified and directed. |
| 26 | S & F in replacement ding dong bell AC 230 Volts single pole complete all as specified and directed. |
| 27 | S&F hylem sheet in replacement for fixing of switches, sockets, regulators as directed with suitable screwing,fastening arrangement in wall/box complete all as specified and directed. |
| 28 | S & F Modular Bell push 6A 1 module complete all as specified and directed. |
| 29 | S & F Modular switch 1 way 6A, 1 module complete all as specified and directed. |
| 30 | S & F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 31 | S & F Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 32 | S & F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 33 | Supply and fixing in replacement 1 module step fan regulator complete all as specified and directed. by Engr-in-Charge. |
| 34 | S & F in replacement Modular white cover plate with frame of 6 module complete all as specified and directed. |
| 35 | S & F in replacement Modular white cover plate with frame of 3 module complete all as specified and directed. |
| 36 | S & F in replacement metal flush box 6 module complete all as specified and directed. |
| 37 | S & F in replacement metal flush box 3 module complete all as specified and directed. |
| 38 | S & F in replacement lamp holder PVC polycarbonate complete all as specified and directed. |
| 39 | S & F in 15 Watt LED lamp complete including taking down old UNSV light fitting complete all as specified and directed. Make:- Bajaj/Philips/Havells/Crompton. |
| 40 | Supply and fixing in replacement LED tube light fittings 1 x 40 watts, 230 volts, 4 feet long complete with all accessories internally pre-wired and including connecting up with twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings complete including taking down old UNSV light fitting complete all as specified and directed. |
| 41 | Supply and fixing in replacement LED tube light fittings 1 x 20 watts, 230 volts, 4feet long complete with all accessories internally pre-wired and including connecting up with twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings complete including taking down old UNSV light fitting all as specified and directed. |
| 42 | Supply and fixing in replacement LED tube light fittings 1 x 20 watts, 230 volts , 2 feet long complete with all accessories internally pre-wired and including connecting up with twisted flexible cable of 0.75 sq mm 3 core copper conductor from ceiling rose to light fittings including taking down old UNSV light fitting complete all as specified and directed. |
| 43 | S&F in replacement 32 Amps 240 Volts Single Pole & Neutral Switch fuse unit including taking down old UNSV complete all as specified and directed. |
| 44 | S & F in replacement Single core 1.0 sqmm PVC insulated and FR PVC Round Sheathed, Copper Conductor cable complete all as specified and directed. |
| 45 | S & F in replacement 3 core 1.5 sqmm PVC insulated and FR PVC Round Sheathed, Copper Conductor cable complete all as specified and directed. |
| 46 | S & F in replacement 3 core 2.5 sqmm PVC insulated and FR PVC Round Sheathed, Copper Conductor cable complete all as specified and directed. |
| 47 | Supply and fixing sheet metal enclosure TPN DB 415 volts 4 way double door type with rated bus bar for fixing MCB complete including taking down old unserviceable Sheet metal enclosure complete all as specified and directed.. |
| 48 | Supply and fixing sheet metal enclosure DB SPN 240 volts 12 way double door type with rated bus bar for fixing MCB complete including taking down old unserviceable Sheet metal enclosure complete all as specified and directed.. |
| 49 | Supply and fixing sheet metal enclosure DB SPN 240 volts 8 way double door type with rated bus bar for fixing MCB complete including taking down old unserviceable Sheet metal enclosure complete all as specified and directed.. |
| 50 | Supply and fixing sheet metal enclosure DB SPN 240 volts 4 way single door type with rated bus bar for fixing MCB complete including taking down old unserviceable Sheet metal enclosure complete all as specified and directed.. |
| 51 | Supply and fixing sheet metal enclosure DB SPN 240 volts 6 way double door type with rated bus bar for fixing MCB including taking down old unserviceable Sheet metal enclosure complete all as specified and directed. |
| 52 | Supply and fixing MCB TPN pole 415 volts 63 Amps, 10 kA, 'B' curve complete complete all as specified and directed. |
| 53 | Supply and fixing MCB SPN 240 volts 6 to 32 Amps, 10 kA, 'B' curve complete all as specified and directed. |
| 54 | Supply and fixing MCB SPN 240 volts 40 to 63 Amps, 10 kA, 'B' curve complete all as specified and directed. |
| 55 | Supply and fixing MCB SP 240 volts 6 to 32 Amps, 10 kA, 'B' curve complete all as specified and directed. |
| 56 | Supply and fixing sheet metal enclosure with single pole and neutral enclosure with at two pin and earth plug and socket with one single pole MCB 20 Amp, 10 kA, 'C' curve operated on 240 volt AC supply complete all as specified and directed. |
| 57 | M&L for sub main wiring with two single core PVC insulated, PVC sheathed stranded copper conductor (FRLS) cable of size 2 x 6 sq mm unsheathed drawn in and including PVC conduit including accessories in surface to wall/floor/ceiling etc and 1 x 6 sq mm PVC insulated unsheathed copper conductor as continous earth continuity conductor drawn in complete including old unserviceable submain wiring complete all as specified and directed. |
| 58 | M/L for sub main wiring using two single core PVC insulated, PVC sheathed stranded copper conductor (FRLS) cable of size 2 x 4 sq mm unsheathed drawn in and including PVC conduit including accessories in surface to wall/floor/ceiling etc and 1 x 4 sq mm PVC insulated unsheathed copper conductor as continous earth continuity conductor drawn in complete including old unserviceable submain wiring complete all as specified and directed. |
| 59 | M&L for two core PVC insulated, PVC sheathed stranded flat aluminum conductor cable of size 2 x 6 sq mm complete all as directed and specified. |
| 60 | M&L for two core PVC insulated, PVC sheathed stranded flat aluminum conductor cable of size 2 x 10 sq mm complete all as directed and specified. |
| 61 | Material & Labour for earthing with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to the galvanised earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20 mm graded stone aggregate, pit, funnel, 20 mm dia GI medium grade watering pipe, 15mm dia GI medium grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8 mm dia TMT bar @150 c/c both ways, one lifting handle made out of 10 mm dia TMT bar 250 mm long embedded in cover slab and cover, wire, copper lugs etc mesh, chorcoal and common salt in alternate layer of 15cm thick complete all as specified and directed. |
| 62 | S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wre complete all as specified and directed. |
| 63 | Supply and fixing environmental friendly energy saving 10 watt LED bulk head luminaire including 10W LED lamp complete complete all as specified and directed. |
| 64 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 65 | Supply and fixing PVC rigid non-metallic 1 to 3 gang box including all accessories such as couplers, lock nuts, saddles, pipe hooks etc complete including taking down old unserviceable gang box complete all as specified and directed.. |
| 66 | Supply and fixing PVC rigid non-metallic 4 gang box including all accessories such as couplers, lock nuts, saddles, pipe hooks etc complete including taking down old unserviceable gang box complete all as specified and directed.. |
| 67 | Supply and fixing PVC rigid non-metallic 6 gang box including all accessories such as couplers, lock nuts, saddles, pipe hooks etc complete including taking down old unserviceable gang box complete all as specified and directed.. |
| 68 | Supply and fixing PVC rigid non-metallic 8 gang box including all accessories such as couplers, lock nuts, saddles, pipe hooks etc complete including taking down old unserviceable gang box complete all as specified and directed.. |
| 69 | S&F in replacement 63 Amps 4 way bus bar chamber with necessary fixing arrangement such as jointing material, nuts, bolts, washers and clamps etc complete including old unserviceable old bus bar chamber all as specified and directed. |
| 70 | S&F in replacement 100 Amps 4 way bus bar chamber with necessary fixing arrangement such as jointing material, nuts, bolts, washers and clamps etc complete including old unserviceable bus bar chamber all as specified and directed. |
| 71 | Supply and fixing PVC rigid non-metallic of size 20 mm exclusive of boxes(junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete including taking down old unserviceable complete all as specified and directed. |
| 72 | M&L for services of jointing/taping or checking the electrical connections and securing after defect rectification in existing light, fan, sockets,DBs, wiring circuits, switches, junction boxes complete as and when required/directed. |
| 73 | Taking down old unserviceable ceiling fan of any sweep with disconnecting the electric connection for repair and reuse at site or carrying to the store complete all as specified and directed. |
| 74 | Hanging only ceiling fan of 1200 mm sweep after repairs and connecting up including provision of cable from ceiling rose or connector to fan, all other fixing accessories such as nuts, bolts, washsers, split pin, jam nuts, MS 'J' hook, etc. are included and servicing complete all as specified and directed. |
| 75 | All as per item above here-in-before but 1400mm sweep ceiling fan |
| 76 | Material and labour for rewinding of 1200mm sweep ceiling fan with suitable size of super enamelled copper wire including necessary heat varnishing, over hauling complete and reassembling the same in existing position including testing complete all as specified and directed. |
| 77 | All as per item above here-in-before but 1400mm sweep ceiling fan |
| 78 | Supply and fixing ball bearing No. 6201 of ceiling fan complete all as specified and directed.. |
| 79 | Supply and fixing ball bearing No.6202 of ceiling fan complete all as specified and directed. |
| 80 | Supply and fixing iron bushes of suitable size for ceiling fancomplete all as specified and directed. |
| 81 | Supply and fixing rubber bush/ reel insulator of ceiling fan complete all as specified and directed. |
| 82 | Supply and fixing 2.5 MFD condenser of ceiling fan complete all as specified and directed. |
| 83 | Supply and fixing 3 MFD condenser of ceiling fan complete all as specified and directed. |
| 84 | Supply and fixing down rod 1/2\\" dia, 12\\" long of hanging of ceiling fan complete all as specified and directed. |
| 85 | Taking down old unserviceable exhaust fan of any sweep with disconnecting the electric connection for repair and reuse at site or carrying to the store complete all as specified and directed. |
| 86 | Fixing only exhaust fan of 250 mm sweep and connecting up including provision of cable from ceiling rose or connector to fanall other fixing accessories such as nuts, bolts, washsers, split pin, jam nuts, MS 'J' hook, etc. are included in this item and servcing of fan complete all as specified and directed. |
| 87 | All as per item above here-in-before but 300mm sweep exhaust fan |
| 88 | Material and labour for rewinding of 250mm sweep exhaust fan with suitable size of super enamelled copper wire including necessary heat varnishing, over hauling complete and reassembling the same in existing position including testing complete all as specified and directed. |
| 89 | All as per item above here-in-before but 300mm sweep exhaust fan complete all as specified and directed. |
| 90 | Supply and fixing ball bearing No. 6301 of exhaust fan complete all as specified and directed. |
| 91 | Supply and fixing ball bearing No.6302 of exhaust fan complete all as specified and directed. |
| 92 | Supply and fixing iron bushes of suitable size for exhaust fan complete all as specified and directed. |
| 93 | Supply and fixing rubber bush/ reel insulator of exhaust fan complete all as specified and directed. |
| 94 | Supply and fixing 2.5 MFD condenser of exhaust fan complete all as specified and directed. |
| 95 | Supply fixing 3 MFD condenser of exhaust fan complete all as specified and directed. |
| 96 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. (Note : - Old ceiling fan shall be deposited to MES for further handover to ARC) |
| 97 | Supply and fix exhaust fan, metal body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting hole to wall of suitable size and surface as per existing by plastering complete all as specified and directed.(Note : - Old exhaust fan shall be deposited to MES for further handover to ARC) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender