Tender For Repair/Replacement Of Plumbing & Sanitary Fittings, Internal Water Supply Line, Sunken, Flooring Etc And Associated Works In Main C And Tech Area At Afs Tambaram (8914/E8)
Tender Value
25 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
13 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Plumbing & Sanitary Fittings, Internal Water Supply Line, Sunken, Flooring Etc And Associated Works In Main C And Tech Area At Afs Tambaram (8914/E8)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Jul-2026 | Corrigendum | Technical Bid | 25-Jul-2026 |
| 2 | 10-Jul-2026 | BOQ Amendment | BOQ | 25-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of steel tubing and connections complete on walls floors etc for 15mm bore of pipe complete all as specified and directed by Engineer-in-Charge. |
| 2 | All as per item No. 1 above but bore of pipe in 20mm dia complete all as specified and directed by Engineer-in-Charge. |
| 3 | All as per item No. 1 above but bore of pipe in 25mm dia complete all as specified and directed by Engineer-in-Charge. |
| 4 | Refixing of old steel tubing and connections is in now or old positions (walls ceiling floors etc) bore of pipe 15mm complete all as specified and directed by Engineer-in-Charge. |
| 5 | All as per item No. 04 above but bore of pipe 20mm complete all as specified and directed by Engineer-in-Charge. |
| 6 | All as per item No.04 above but bore of pipe 25mm complete all as specified and directed by Engineer-in-Charge. |
| 7 | S&F Galvanised iron medium graded tubes with all fittings and fixed complete on walls ceiling or laid in floors etc,15mm in dia complete all as specified and directed by Engineer-in-Charge. |
| 8 | All as per item No. 7 above but bore of pipe 20 mm complete all as specified and directed by Engineer-in-Charge |
| 9 | All as per item No. 7 above but bore of pipe 25 mm complete all as specified and directed by Engineer-in-Charge. |
| 10 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in walls/trenches/ceilings complete all as specified and directed by Engineer-in-Charge. |
| 12 | S&F in repair 20mm bore Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer-in-Charge. |
| 13 | S&F in repair 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed by Engineer-in-Charge. |
| 14 | S & F in repair 15mm bore Bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge. |
| 15 | S & F in repairs 15 mm dia Pillar taps long body fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 16 | S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 17 | S&F in repairs 15 mm dia fancy type Stop valves / angle cock cast copper alloy,chromium plated screwed down, high pressure, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F in repairs 15mm dia Swan neck long body CP pillar tap fancy type cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 19 | S&F in repairs 15 mm dia Bib tap standard PTMT long body any colour screwed for iron pipe (Min weight 120 gms) complete all as specified and directed by Engineer-in-Charge. |
| 20 | S&F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F in repairs 15mm dia angle Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms) complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F 500 Ltr capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling existing tank complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F 1000 Ltr capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top hoisted and fixed in position including dismantling existing tank complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repair Cover/ lid for PVC water tank of any capacity complete all as specified and directed by Engineer-in-Charge. |
| 25 | Disconnecting existing tanks of capacity exc 250 ltr & n exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed by Engineer-in-Charge. |
| 26 | Disconnecting existing tanks of capacity exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc complete all as specified and directed by Engineer-in-Charge. |
| 27 | S/F in repairs Waste coupling of PTMT (half or full threaded) 32mm bore dia of discharge pipe (Min wt 45gms) complete all as specified and directed by Engineer-in-Charge. |
| 28 | S & F in repair Waste coupling bore dia 32mm of PTMT (half or full threaded) but suitable for urinals, (Minimum weight 32mm-45gms) complete all as specified and directed by Engineer-in-Charge. |
| 29 | S&F in repairs Bottle trap of PTMT having minimum water seal of 25mm ( min wt of 260gms) for 32mm bore complete all as specified and directed by Engineer-in-Charge. |
| 30 | S & F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends complete all as specified and directed by Engineer-in-Charge. |
| 31 | S & F in repairs 125mm size brass chromium plated shower rose with swivel joints and shower arm complete all as specified and directed by Engineer-in-Charge. |
| 32 | S&F in repair 600mmx450mm belvelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood with pvc / alluminium frame and fixed to wooden plugs with chromum plated brass screws cup washers complete all as specified and directed by Engineer-in-Charge. |
| 33 | S & F in repair tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed by Engineer-in-Charge. |
| 34 | S & F in repairs plastic water closet seat & cover black / white for pedestal pan , closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge. |
| 35 | S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 36 | S&F in repair PVC ball valve 25 mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plasic ball screwed for iron pipe and fixed (minimum weight 25 mm- 455 gms ) complete all as specified and directed by Engineer-in-Charge. |
| 37 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity of tank exc 250 & n exc 500 ltrs complete all as specified and directed by Engineer-in-Charge. |
| 38 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity of tank exc 500 & n exc 1000 ltrs complete all as specified and directed by Engineer-in-Charge. |
| 39 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc capacity of tank exc 1000 & n exc 2000 ltrs complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F in repairs vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed by Engineer-in-Charge. |
| 41 | S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed by Engineer-in-Charge. |
| 42 | S & F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed by Engineer-in-Charge. |
| 43 | S/F in repairs Towel ring Chromium plated fixed with chromium plated brass screws and wooden/plastic cleats (min wt 90 gms) complete all as specified and directed by Engineer-in-Charge. |
| 44 | S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe (min weight 40 gms) complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F in repair 900mm long PVC waste pipe of size 32mm as in urinal pot / WHB/Sink including all fitting of approved make complete all as specified and directed by Engineer-in-Charge. |
| 46 | S & F PVC( SWR ) pipes 110mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed by Engineer-in-Charge. |
| 47 | S & F PVC( SWR ) pipes 75mm dia single socketed , in any lenth with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall or laid in trenches incl taking down complete all as specified and directed by Engineer-in-Charge. |
| 48 | S&F PVC (SWR) bends any radius 110mm bore in repairs complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F PVC (SWR) bends with access door any radius 110mm bore in repairs complete all as specified and directed by Engineer-in-Charge. |
| 50 | S&F PVC (SWR) bends any radious 75 mm dia complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F 75mm dia PVC (SWR) bend with access door complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement in repairs complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F PVC (SWR) bends any radious 75 mm dia with access door complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in repair 110 mm PTMT/CP Grating complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F 75mm dia Branch piece single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F 110mm dia Branch piece single (single Y) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge. |
| 57 | S&F 75mm dia branch piece double (double Y ) equal or unequal provided with acess door complete all as specified and directed by Engineer-in-Charge. |
| 58 | S&F 110mm dia branch piece double (double Y ) equal or unequal provided with acessdoor complete all as specified and directed by Engineer-in-Charge. |
| 59 | S&F 75mm dia PVC (SWR) junction single (Single T ) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge. |
| 60 | S&F 110 mm dia PVC (SWR) junction single (Single T ) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge. |
| 61 | S&F 110mm dia PVC (SWR) junction single (Double T ) equal or unequal with access door complete all as specified and directed by Engineer-in-Charge. |
| 62 | Taking down and refixing of WHB viterous china of any type and size in same position or other position complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F in repair vitreous china wash basin, white, flat back size 550 x 400mm including 01 Nos cast copper alloy 15mm CP pillar tap, 01 Nos 32mm waste coupling and flush pipe of polyethylene of low or high density or 32mm dia PVC pipe, one pair of MS bracket, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engineer-in-Charge. |
| 64 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern and flush pipe complete with plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and connection to drain (or outgoing pipe) complete all as specified and directed by Engineer-in-Charge. |
| 65 | S&F in repairs vitreous china \\"Cascade European Water Closet\\" of any colour one piece, or wall-hung or floor mounted Western Commode including fixing bolts and plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and connection to drain (or outgoing pipe) complete all as specified and directed by Engineer-in-Charge. |
| 66 | S & F in repairs, vitreous china Squatting pan Orissa pattern of size 580mx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and directed by Engineer-in-Charge. |
| 67 | S & F in repair CP toilet paper holder fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed by Engineer-in-Charge. |
| 68 | S& F in repairs CP Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 69 | S/F in repairs chromium plated urinal spreader complete all as specified and directed by Engineer-in-Charge. |
| 70 | S & F in repairs health faucet (ABS Body) with spray jet (hand shower) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type complete all as specified and directed by Engineer-in-Charge. |
| 72 | S & F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe of 15mm bore dia and fixed complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repairs Internal componants part (except PVC body) of PVC Flushing cistern 10 Ltr capacity incl ball valve etc complete all as specified and directed by Engineer-in-Charge. |
| 74 | S&F in repair sink with drainage board made of stainless steel 0.9 mm thick kitchen or labourator with plug washers,and waste pipe, incl bedding in CM to drwaf wall or incl fixing cntilever brackets and conecting union to pipe over all size 915mmx450mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge. |
| 75 | Cutting chases for concelled water tubing and making good, cutting n.exc 20cm in girth or width complete all as specified and directed by Engineer-in-Charge. |
| 76 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed by Engineer-in-Charge. |
| 77 | M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge. |
| 78 | M&L for Brick work with sub class old half brick size straight or curved on plan exc 6 m mean radius in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 79 | Taking down cement or cement limes plaster on brick or stonewalls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 80 | M & L for rendering 15mm thick in cement mortor 1:4 on Brick wall surfaces, finished even and smooth without using extra cement with @ at 3% IWPC (IWPC measured separately) complete all as specified and directed by Engineer-in-Charge. |
| 81 | M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 82 | M&L 5 mm thick plastering in CM 1:3 finished even and smooth without using extra cement on brick surface of ceilings complete all as specified and directed by Engineer-in-Charge. |
| 83 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting primer paint on plastered surrface complete all as specified and directed by Engineer-in-Charge. |
| 84 | M & L preparation of new surfaces of walls plastered or unplastered etc and applying two coat of cement based paint over a coat of alkali resistant primer on wall surfaces complete all as specified and directed by Engineer-in-Charge. |
| 85 | M & L preparation of new surfaces of walls plastered or unplastered and applying three coat of white wash on ceiling to obtain uniform surfaces including making good the surface complete all as specified and directed by Engineer-in-Charge. |
| 86 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 87 | Demolition of cement concrete unreinforced of any description of any position not otherwise specfically provided for or as in sunken floors complete all as specified and directed by Engineer-in-Charge. |
| 88 | Taking down completely existing treatment along with plaster as in sunken slabs vertical faces complete all as specified and directed by Engineer-in-Charge. |
| 89 | M&L 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) & surface even & smooth using extra cement with IWPC (IWPC measured and paid seperately) as in sunken slabs complete all as specified and directed by Engineer-in-Charge. |
| 90 | M&L for applying evenly a coat of industrial bitumen 85/25 at the rate of 1.2kg/Sqm including cleaning surface complete all as specified and directed by Engineer-in-Charge. |
| 91 | M&L for 15mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement with IWPC (IWPC measured and paid separately) as in sunken slab complete all as specified and directed by Engineer-in-Charge. |
| 92 | S&F of low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/sqcm fixed to walls, floors etc of 32mm bore as in spouts for sunken slabs complete all as specified and directed by Engineer-in-Charge. |
| 93 | M&L cement concrete type E-2, 1:5:10 (40mm graded stone aggregate) as in mass fillings complete all as specified and directed by Engineer-in-Charge. |
| 94 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-Charge. |
| 95 | Dismantling floor hearth or wall tiling incl cement mortor bedding (but not backing) removing the rubbish of the premises complete all as specified and directed by Engineer-in-Charge. |
| 96 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., laid over and including cement screed bed or bedding layer in CM (1:6), 15mm thick and tiles jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, complete all as specified and directed by Engineer-in-Charge. |
| 97 | M & L glazed ceramic coloured tiles of size 300x450x7 mm / 350x 250x 7mm / 450X 350X 7mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed by Engineer-in-Charge. |
| 98 | M&L for 25mm thick cement concrete (1:2:4) type B0 (12.5mm graded stone aggregate) as in sub-base complete all as specified and directed by Engineer-in-Charge. |
| 99 | M&L Vitrified Ceramic tiles, light shade, 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc., and laid over and including cement screed bed or bedding layout in CM (1:6), 15mm thick and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete all as specified and directed by Engineer-in-Charge. |
| 100 | M&L Vitrified Ceramic tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in skirting / dados etc and including 10mm thick rendering in CM(1:4) baking coat and jointed in neat slurry and pointed in white or coloured cement to match using light shade coloured tiles complete all as specified and directed by Engineer-in-Charge. |
| 101 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 102 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per manufacturer instruction complete all as specified and directed by Engineer-in-Charge. |
| 103 | S & F factory made solid PVC Panel Door shutter 30mm thick (style) consisting of Frame made out of M.S Tube for top & Bottom rails. MS Frame shall be covered with heat moulded, Plain colour PVC ’C’ channel having a PVC Sheets strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet to be fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading, and joined together with solvent cement as per manufacture instruction complete all as specified and directed by Engineer-in-Charge. |
| 104 | S & F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed by Engineer-in-Charge. |
| 105 | S & F 125 mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge. |
| 106 | S & F 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge. |
| 107 | S & F 300mm long aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed by Engineer-in-Charge. |
| 108 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of existing stone slabs laid, bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge. |
| 109 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jul 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 days
Jul 25, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender