Tender For Comprehensive Repair/Maint/Replacement Of Unsv Wiring,Internal Electric Fixtures,Electric Meters And Other Connected E/M Work In Otm Accn At Klp And Adjoing Area At Babina.
Tender Value
39.80 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
18 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair/Maint/Replacement Of Unsv Wiring,Internal Electric Fixtures,Electric Meters And Other Connected E/M Work In Otm Accn At Klp And Adjoing Area At Babina.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for Modular concealed point wiring for one light controlled by one modular switch with PVC insulated and unsheathed FRLS-H cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with modular MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats black bituminous paint out side and two coat of aluminium paint from in side including earth dolly and 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed for the following. Note : Modular matching cover frame pates of defferent sizes are shall be measured separately. |
| 2 | All as per Srl item No.1 above but one fan / Exhaust fan point controlled by one modular switch & modular regulator. |
| 3 | All as per Srl item No.1 above but one 6 Amp socket outlet point controlled by one modular switch on independent board. |
| 4 | All as per Srl item No.1 above but one 6 Amp socket outlet point controlled by one modular switch on same board. |
| 5 | All as per Srl item No.1 above but one bell / buzzer point controlled by one modular bell switch |
| 6 | All as per item No. 1 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 7 | M&L for Modular Casing Caping 20mm point wiring one light controlled by one modular switch with PVC insulated and unsheathed FRLS-H cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC casing caping, with modular MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats black bituminous paint out side and two coat of aluminium paint from in side including earth dolly and 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed for the following Note : Modular matching cover frame pates of defferent sizes are shall be measured separately. |
| 8 | All as per Srl item No.7 above but one fan / Exhaust fan point controlled by one modular switch . |
| 9 | All as per Srl item No.7 above but one 6 Amp socket outlet point controlled by one modular switch on independent board. |
| 10 | All as per Srl item No.7 above but one 6 Amp socket outlet point controlled by one modular switch on same board. |
| 11 | All as per Srl item No 7 above but one bell / buzzer point controlled by one modular bell switch |
| 12 | All as per item No. 7 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 13 | M&L for Modular PVC surface conduit point wiring one light controlled by one modular switch with PVC insulated and unsheathed, FRLS-H 1100 volt grade electric cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with multistranded copper conductor single core in and including rigid PVC surface conduit not less than 20 mm dia, clip, with suitable MS terminal boxes ( not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats black bituminous paint out side and two coat of aluminium paint from in side including earth dolly and 1.50 sqmm green multistranded copper conductor as continuous earth wire with all accessories including lugs required, complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed for the follwing : Note : Modular matching cover frame pates of different sizes shall be measured and paid separately. |
| 14 | All as per Srl item No.13 above but one fan / Exhaust fan point controlled by one modular switch & modular regulator . |
| 15 | All as per Srl item No.13 above but one 06 Amp socket outlet point controlled by one modular switch on independent board . |
| 16 | All as per item No.13 above but one 06 Amp socket outlet point controlled by one modular switch on same board . |
| 17 | All as per item No.13 above but one bell/buzzer point controlled by one modular bell switch. |
| 18 | All as per item No. 13 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 19 | M&L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, FRLS-H 1100 volt grade electric cable of 1.5 sqmm including taking down of old U/S point wiring (nominal area) with multistranded copper conductor single core in and including rigid PVC surface conduit medium grade not less than 20 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed for the following |
| 20 | All as per Srl item No.19 above but one fan / Exhaust fan point controlled by one switch & regulator. |
| 21 | All as per Srl item No.19 above but one 6 Amp socket outlet point controlled by one switch on independent board . |
| 22 | All as per Srl item No.19 above but one 6 Amp socket outlet point controlled by one switch on same board . |
| 23 | All as per Srl item No.19 above but one bell/buzzer point controlled by one switch . |
| 24 | All as per Srl item No 19 above but one light point controlled by two 2-way switch . |
| 25 | All as per item No. 19 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 26 | M&L PVC casing caping 20 mm point wiring for one light controlled by one switch complete with PVC insulated and unsheathed FRLS-H cable of 1.5 sqmm including taking down of old U/S point wiring(nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC casing caping 20 mm, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multistranded copper conductor as continuous earth wire with lugs complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed for the following |
| 27 | All as per Srl item No.26 above but one fan / Exhaust fan point controlled by one switch . |
| 28 | All as per Srl item No.26 above but one 6 Amp socket outlet point controlled by one switch on independent board. |
| 29 | All as per Srl item No.26 above but one 6 Amp socket outlet point controlled by one switch on same board. |
| 30 | All as per Srl item No 26 above but one bell / buzzer point controlled by one bell switch |
| 31 | All as per item No. 26 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 32 | M&L normal concelled point wiring for one light controlled by one switch complete with PVC insulated and unsheathed flame retardant Low Smoke(FRLS-H) cable of 1.5 sqmm including taking down of old U/S point wiring(nominal area) with multistranded copper conductor single core 1100 volts grade with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chase on wall/ ceiling surfaces for MS terminal box / drawing of condiut and cable as required and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed for the following |
| 33 | All as per Srl item No.32 above but one fan / Exhaust fan point controlled by one switch . |
| 34 | All as per Srl item No.32 above but one 6 Amp socket outlet point controlled by one switch on independent board. |
| 35 | All as per Srl item No.32 above but one 6 Amp socket outlet point controlled by one switch on same board. |
| 36 | All as per Srl item No 32 above but one bell / buzzer point controlled by one bell switch |
| 37 | All as per item No. 32 here-in-before but one 16A socket point controlled by one 16A switch on independent board with 2.5 sqmm wires. |
| 38 | S&F switch piano flush button type 6 Amp (PC) single pole one way complete all as specified and as directed. |
| 39 | S&F socket outlet white 3 pin, 6 Amp (PC) flush type complete all as specified and as directed. |
| 40 | S&F switch piano flush button type 16/20 Amp (PC) single pole one way complete all as specified and as directed. |
| 41 | S&F socket outlet white 2 in1, 3 pin, 16 Amp (PC) flush type complete all as specified and as directed. |
| 42 | S&F switch piano white flush button type 6 Amp (PC) single pole 2 way complete all as specified and as directed. |
| 43 | S & F delux Fan Regulator white electronic rotary, socket type 240 Volt 50 Hz complete all as specified as directed. |
| 44 | S & F delux Fan Regulator white electronic rotary, step type 240 Volt 50 Hz complete all as specified as directed. |
| 45 | S&F switch bell push white button type 6 Amp (PC) single pole complete all as specified and as directed. |
| 46 | S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed. |
| 47 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings 240 volt-50 Hz complete all as specified as directed. |
| 48 | S & F 10W LED lamp B22 CDL,Lumen output 950 Im, 6500 K, 60 mm dia complete all as specified as directed.MAKE:- Havells/Bajaj/Crompton /Philips/Oriant |
| 49 | S & F 10W LED lamp E27 WW,Lumen output 950 Im, 3000 K, 60 mm dia complete all as specified as directed.MAKE:- Havells/Bajaj/Crompton /Philips/Oriant |
| 50 | S&F ceiling rose pilot ,surface POLYCARBONATE 65 x50mm three terminals complete all as specified and as directed. |
| 51 | S & F modular switch one way 06 Amp,1 module complete all as specified and as directed . |
| 52 | S&F modular socket 06 Amp, 2/3 pin combined 2 module complete all as specified and as directed. |
| 53 | S & F modular switch one way 16 Amp,1 module complete all as specified and as directed. |
| 54 | S & F modular socket 16 Amp, 2/3 pin combined 2 module complete all as specified and as directed. |
| 55 | S & F modular Fan Regulator fan socket type regulator,2 module complete all as specified as directed. |
| 56 | S&F modular bell push 10 Amp ,1 module complete all as specified and as directed. |
| 57 | S&F Modular matching cover frame plates for 1/2 modules box complete all as specified and as directed. |
| 58 | S&F Modular matching /outer cover frame plate white for 3 modules complete all as specified and as directed. |
| 59 | S&F Modular matching /outer cover frame plate white for 4 modules complete all as specified and as directed. |
| 60 | S&F Modular matching /outer cover frame plate white for 6 modules complete all as specified and as directed. |
| 61 | S&F Modular matching /outer cover frame plate white for 8 modules complete all as specified and as directed. |
| 62 | S&F Modular matching/ outer cover frame plate white for 12 modules complete all as specified and as directed. |
| 63 | S&F Modular matching blanker white complete all as specified and as directed. |
| 64 | Supply and fix in repiar/ replacement MCB distribution board, SPN, 4 way with provision of suitable MCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar 100 Amps, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface including taking down old U/S distribution box all as specified and directed.Note: MCCB / MCBs shall be measured and paid separately. Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 65 | All as per srl item No. 64 here-in-before but SPN 8 way DB complete all as specified and directed. |
| 66 | All as per srl item No. 64 here-in-before but SPN 12 way DB complete all as specified and directed. |
| 67 | Supply and fixing in repair/ replacement of sheet metal enclosure SPN 2 way,single door with taking down old U/S distribution box ,240 V fixing in consealed or surface complete all as specified and as directed. Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 68 | Supply and fixing in repair/ replacement of plastic MCB enclosure SPN 2 way,single door with taking down old U/S distribution box ,240 V fixing in consealed or surface complete all as specified and as directed. |
| 69 | S&F in replacement of MCB DP 32 Amp 240 V ,10KA ,'C' series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 70 | S&F in replacement of MCB DP 40 Amp 240 V ,10KA ,'C' series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 71 | S&F in replacement of MCB DP 63 Amp 240 V ,10KA ,'C' series, with copper lugs complete all as specified and directed . Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 72 | S&F MCB in replacement of MCB SP 6 to 32 Amps 240 V,10KA, 'C' series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 73 | S&F MCB in replacement of MCB SP 63 Amps 240 V,10KA, 'C' series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 74 | S&F MCB in replacement of MCB SP 40 Amps 240 V,10KA, 'C' series, with copper lugs complete all as specified and directed .Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 75 | Supply and fix MCCB / MCB distribution board, Vertical TPN, 4 way with provision of suitable MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar 100A to 125A, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.Note: MCCB / MCBs shall be measured and paid separately. Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 76 | S&F in replacement of MCCB 63 Amps,4 pole,415volts,3 phase,50HZ, having 16 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70- 100% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed.Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 77 | S&F in replacement of MCCB 100 Amps,4 pole,415volts,3 phase,50HZ, having 16 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70- 100% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed.Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 78 | Supply and fix MCB distribution board, TPN, 4 way 415 Volt in sheet steel powder painted enclosure double door type with IP 43 degree of protection with built in copper bus bar 100A to 125A, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. Note: MCBs shall be measured and paid separetely. Make :- Havells / ABB /HPL/ Legrand |
| 79 | S&F MCB in replacement of TPN 63 Amps 240 V,10KA, 'C' series, with copper lugs complete all as specified and directed . Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 80 | S&F MCB in replacement of TPN 100 Amps 240 V, 16KA, 'C' series, with copper lugs complete all as specified and directed . Make :- Havells / ABB/ Indoasian /HPL/ Legrand |
| 81 | S&F in repair/replacement of Circuit/submain wiring alongwith earth wire 2 runs x 1.5 sqmm + 1 run x 1.5 sqmm with FRLS-H PVC insulated unsheathed 1100 volts grade copper conductor, single core multi stranded cable drawn through and including medium grade rigid PVC conduit not less than 20 mm dia (Existing / new) conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers lugs etc of suitable size but not less than 20 mm concealed in wall/ floor etc including taking down old U/S submain wiring complete all as specified and directed by Engineer-in-Charge. Make :- Finolex/Havells/HPL/Anchor. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length. |
| 82 | All as per srl item No.81 here-in-before but of size 2 runs x 2.5 Sqmm + 1 run x 2.5 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 83 | All as per srl item No. 81 here-in-before but of size 2 runs x 4 Sqmm + 1 run x 4 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 84 | All as per srl item No.81 here-in-before but of size 2 runs x 6 Sqmm + 1 run x 6 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 85 | All as per srl item No.81 here-in-before but of size 2 runs x 10 Sqmm + 1 run x 10 Sqmm. Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 86 | S & F in repair/replacement Regid non-metallic PVC conduit medium grade not less than 20 mm dia (external) ISI marked (concelaled or surface as per site requirement) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete including cutting necessary chases on wall/ceiling surfaces for drawing of conduit and making good disturbed surfaces of wall with CM 1:3:4 and matching with the existing surfaces including colour washing all as specified and as directed |
| 87 | All as per srl item No. 86 here-in-before but of casing capping complete all as specified and directed. |
| 88 | All as per srl item No. 86 here-in-before but of pvc size 25 mm dia complete all as specified and directed. |
| 89 | M & L and taking down old U/S twin core cable and Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor standard, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular 1100 V size 6 sq mm to be connected to existing MCB box / Main switches complete all as specified as directed. Make :- Finolex/Havells/HPL/Anchor. |
| 90 | All as per srl item No. 89 here-in-before but twin core cable of size 10 sq mm complete all as specified and directed. |
| 91 | All as per srl item No. 89 here-in-before but twin core cable of size 16 sq mm complete all as specified as directed. |
| 92 | S & F in replacement of decorative wall light fixture FLORAT type made of polycarbonate , including LED Bulb 10 Watts complete all as specified as directed . |
| 93 | S & F in replacement of decorative wall mounting ,champagne STYLO with plastic body diffuser including LED Bulb 10 Watts complete all as specified as directed . |
| 94 | S & F in replacement of decorative wall mounting fixture in durable plastic body designer mesh type in golden finish including LED Bulb 10 Watts complete all as specified as directed . |
| 95 | Supply and fix in replacement of integrated LED batten tubelight 20 watt, 4 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 96 | Supply and fix in replacement of integrated LED batten tubelight 20 watt, 4 feet long, warm white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 97 | Supply and fix in replacement of integrated LED batten tubelight 22 watt, 4 feet long, warm white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 98 | Supply and fix in replacement of integrated LED batten tubelight 20 watt, 4 feet long Triyca Light three color (cool white, nature white & warm white) CCT change IED batten which can change the color of batten fron warn white to natural white to cook white with of a simple toggle swich connecting up with to twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directedMake Heavells / Bajaj / crompton / phillips/Wipro. |
| 99 | Supply and fix in replacement of integrated LED batten tubelight 10 watt, 2 feet long, full white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 100 | Supply and fix in replacement of integrated LED batten tubelight 10 watt, 2 feet long, warm white in Engineering plastic batten with white acrylic cover with built-in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 101 | S&F in replacement of 36 W 2 feet X 2 feet LED Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing / new ceiling rose complete all as specified and directed . MAKE:- Havells/Bajaj/Crompton /Philips |
| 102 | S&F in replacement of 36 W warm white 2 feet X 2 feet LED Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong/Grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing / new ceiling rose complete all as specified and directed . MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 103 | Supply & fixing in replacement of LED bulkhead luminaire 10W CDL in plastic body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 54 protection complete all as specified and directed by Engineer-in-Charge. MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 104 | Supply and fix in replacement of LED bldg security light fitting 45 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 32 mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 105 | Supply and fix in replacement of sleek round /square recessed mounting LED down light 15 W with polycarbonate body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 106 | Supply and fix in replacement of sleek round/ square shape surface mounting LED down light 15 W with polycarbonate body, finish with drop down PC diffuser warm / full white with optimized heat sink for efficient dissipation including taking down existing unserviceable light fitting of any description complete all as specified and directed. |
| 107 | Supply and fix of ventilating fan with plastic body with louvers, 200mm sweep, single phase, 230 volts, 50 Hz. Complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Khaitan. |
| 108 | Supply and fix of ventilating fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. Complete all as specified and directed. MAKE:- Havells/Bajaj/Crompton /Khaitan. |
| 109 | Supply and fix LED strip, 24 watt, warm / cool white/ 18 mtr length, flexible PCB body type including driver, IP 20 protection with accessories such as 06A plugtop, flexible cable etc complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply and fix of ceiling fans complete with blades, down rods, and accessories, 230 V, 1400 mm sweep 3 blade, white/brown colour,. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated, copper winding with brushless direct current motor (BLDC) and connecting up with 3 core x 0.5 sqmm flexible copper conductor cable from ceiling rose all as specified and directed by Engr-in-Charge. Make: Crompton / Havells/ Orient / Bajaj/ HPL or equivalent approved by Engr-in-Charge.. Note: Old Ser/ UNSV fans removed from the site are property of Department, will be deposited at E/M yard |
| 111 | Supply and fix of ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep 3 blade, white /brown colour,. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated, copper winding with brushless direct current motor (BLDC)(with remote) and connecting up with 3 core x 0.5 sqmm flexible copper conductor cable from ceiling rose all as specified and directed by Engr-in-Charge. Make: Crompton / Havells/ Orient / Bajaj/HPL or equivalent approved by Engr-in-Charge. Note: Old Ser/ UNSV fans removed from the site are property of Department, will be deposited at E/M yard |
| 112 | Supply and fix in replacement of LED bldg security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 32 mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed. MAKE:- Havells/Bajaj/Crompton /Philips |
| 113 | S & F in replacement of MCB protected plug socket power units with MCB 20A/25 A SP ‘C’ series fixed in concealed or surface complete all as specified and as directed. |
| 114 | S & F Single Phase Static Energy meter of Accuracy Class 1.0, 240V, 50Hz, with BacklitLCD, Optical port, Display of rating 10-60A with DLMS Compliance as per IS 15959(Measures kWh, kVAh, V,I, PF, frequency, kW, kVA, six months history of Energy &MD in kW & kVA and anti tamper features and load profile) with transparent hingetype box complete all as specified and as directed by Eng-in-Charge.Make L&T/HPL/ABB |
| 115 | S & F AC Three Phase Static Energy meter of Accuracy Class 1.0, 3 X 240V, 50Hz,with Backlit LCD Display of rating 10-60A. (Measures & displays kWh Only)with Transparent Hinge type Box complete all as specified and as directed by Eng-in-Charge. Make L&T/HPL/ABB Note: - Old U/s Electric meter shall be deposited in MES Store. |
| 116 | S&F in replacement of decorative gate light MOON 250 mm made up of high grade unbreakable polycarbonate material suitable for retrofit bulb upto 20 W LED lamp complete all as specified and as directed. |
| 117 | M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 3.0 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
| 118 | Taking out exiting unserviciable under ground cables carefully of any size and type and in any position in trenches / floors / on poles complete all as specified and directed. |
| 119 | Supply,laying and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with stranded aluminium conductor of size 16 sqmm 4 core as per IS 7092 Pt-I including suitable size lugs/thimble complete all as specified and as directed. |
| 120 | All as per srl item No. 119 here-in-before but twin core cable of size 25 sq mm 4 core complete all as specified as directed. |
| 121 | Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for pole / cable / foundation etc including getting out in soft /loose soil complete all as specified and directed. |
| 122 | Removing excavated material / surplus soil to a distance not exc. 50 mtrs & deposited where directed at a level not exc.1.5 mtr above the ground level complete all as specified & directed. |
| 123 | Returning filling in incl spreading, leveling, watering and well ramming in layers not exe 25 cms in hard dense soil , soft disintegrated rock complete all as specified and directed. |
| 124 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 125 | M&L for steel tubing galvanised, light grade complete with fittings laid in trenches/ fixed along with poles with suitable flat iron clamp etc as protection to cables of size 32/40 mm dia bore complete all as specified and as directed. |
| 126 | M&L for cutting of road up to 0.75 m deep suitable for laying underground cables/MS tubes of any size/dia including GI pipe of 50 mm dia & making good the disturbed area to match with the existing level with cement concrete including removing the surplus soil to a distance upto 50 mtr complete all as specified and directed. |
| 127 | Supply only switch piano (PC) flush button type 10 Amp single pole one way complete all as specified and as directed. |
| 128 | Supply only socket (PC) outlet white 3 pin, 10 Amp flush type complete all as specified and as directed. |
| 129 | Supply only switch outlet (PC) white 10 Amp and 20 Amp flush type complete all as specified and as directed. |
| 130 | Supply only socket outlet (PC) white 2 in1, 3 pin, 10 Amp and 20 Amp flush type complete all as specified and as directed. |
| 131 | Supply only delux Fan Regulator white electronic rotary, socket type 240 Volt 50 Hz complete all as specified as directed. |
| 132 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings 240 volt-50 Hz complete all as specified as directed. |
| 133 | Supply only switch bell push (PC) white button type 6 Amp single pole complete all as specified and as directed. |
| 134 | Supply only Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed. |
| 135 | Supply only modular switch one way 10 Amp,1 module complete all as specified and as directed . |
| 136 | Supply only modular socket 10 Amp,2/3 pin combined 2 module complete all as specified and as directed. |
| 137 | Supply only modular switch one way 16 Amp,1 module complete all as specified and as directed. |
| 138 | Supply only modular socket 16 Amp, 2/5 pin complete all as specified and as directed. |
| 139 | Supply only modular Fan Regulator fan socket type regulator,2 module complete all as specified as directed. |
| 140 | Supply only in replacement of LED lights fitting 22 Watt, 220V,6500 K decorative ultra slim LED tube light polycarbonate body connecting up to from existing/ new ceiling rose complete all as specified and directed .MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 141 | Supply only in replacement of LED bulkhead luminaire 10W CDL in plastic body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 54 protection complete all as specified and directed by Engineer-in-Charge. MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 142 | Supply only in replacement of LED lights fitting 10 Watt, 220V,6500 K decorative ultra slim LED tube light polycarbonate body connecting up to from existing/ new ceiling rose complete all as specified and directed .MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 143 | Supply only 10W LED lamp B22 CDL,Lumen output 950 Im, 6500 K, 60 mm dia complete all as specified as directed. MAKE:- Havells/Bajaj/Crompton /Philips/Oriant |
| 144 | Supply only in replacement of LED lights fitting 20 Watt, 220V,6500 K decorative ultra slim LED tube light polycarbonate body connecting up to from existing/ new ceiling rose complete all as specified and directed .MAKE:- Havells/Bajaj/Crompton /Philips/Wipro. |
| 145 | Supply only in replacement of LED bldg security light fitting 35 watts with high efficiency long life LEDs with In-built electronic driver and surge protection upto 10 Kv complete housed in pressure die-cast aluminium housing covered with polycarbonate cover with IP66 degree of protection including provision of GI pipe bracket made up of 32 mm dia medium grade GI pipe of length 1.50m bent to required shape and fixing on walls with suitable MS clamps(02Nos) made up of 25mmx4mm MS flat, nuts, bolts and washers and provision of 3 core twisted flexible copper cable of size 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and as directed. MAKE:- Havells/Bajaj/Crompton /Philips |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender