Tender For Special Repair To Single Officers Accn In Bldg No. P-31 & P-74 At Mh Dehradun
Tender Value
61.60 Lakhs
Estimated cost
Bid Submission
03 Aug 2026
24 days left
EMD
1.17 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Single Officers Accn In Bldg No. P-31 & P-74 At Mh Dehradun
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames n. exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 2 | All as per itme No.1 here in above but exc. 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. |
| 3 | S&F factory made 100 % solid wood plastic composite (WPC) door frame 50x100 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity complete all as specified and directed. |
| 4 | S&F factory made 100 % solid wood plastic composite (WPC) door frame 65x125 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof, termite proof, fire retardant and having good screw holding capacity complete all as specified and directed. |
| 5 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary shall be paid separately |
| 6 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type Glazed door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 7 | S & F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar dovetailes or welded complete al as specified and directed . |
| 8 | S & F steel window with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bar dovetailes or welded complete al as specified and directed . |
| 9 | S&F powder coated ventilator fixed type and frame made with aluminium section with and including partly glass and partly stainless steel wire mesh and including aluminium grill of aperture not more than 40 sqcm, including taking down old window/ventilator etc aluminium sections shall be of size as given below:- Frame : 44.5 x 44.5 mm x 1.98 mm thick including 5mm thick frosted glass fixed with rubber gasket with aluminium beading and stainless steel wire mesh of 0.63 mm nominal dia wire and average width of aperture 1.40 mm |
| 10 | S&F aluminium anodised partition with frame, (fixed type) shutter and glazing with 4.8 mm thick plain glass and 12mm thick prelaminated particle board interior grade in bottom panell, glass fixed with rubber gasket with aluminium glazing clips & snap beading including taking down unserviceable existing partition etc allas directed of following sizes:-Frame of vertical/horizontal section:- 44.5x44.5x1.22 mm thickBottom section:-100x44.5x1.22 mm thickWork will be carried out up to 5th storey |
| 11 | S&F in repair of Aluminium body door cill at bottom part of door to stop entry of insect inside the room complete all as specified and as directed. |
| 12 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm complete .all as specified and directed. |
| 13 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete .all as specified and directed. |
| 14 | S&F Stainless steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete all as specified and directed. |
| 15 | S&F stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified and directed. |
| 16 | S&F stainless steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame complete all as specified and directed. |
| 17 | S&F stainless steel handles 150 mm long one piece and fixed with screws/welded to frame complete all as specified and directed. |
| 18 | S&F 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts complete .all as specified and directed. |
| 19 | S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed. |
| 20 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 21 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 22 | S&F Pre- painted galvalume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge , fixed with self tapping screws having cap with rubber and metal washer complete all as specified and directed. |
| 23 | Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed |
| 24 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, post, pipes; fixed with angle cleats or other connecting plates Fe-290 (Gde E-165) complete all as specified and directed . |
| 25 | M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 26 | S&F in repair 25 mm dia stainless steel (304 grade) curtain rods with fixing backets, knob with sutable size etc complete all as specified and directed. |
| 27 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 28 | M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete all as specified and directed. |
| 29 | M&L for 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed. |
| 30 | M&L non-skid / mat finish designed coloured joint free ceramic tiles of size 300 mm x 300 mm x6- 7 mm thick in floor, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15 mm thick screed in cement mortar 1:6 including dismantling of existing tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 31 | M&L for glazed ceramic colour tiles of size 300 x 450 x 6-7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match fixed over and including 10mm thick rendering in cement mortar 1:4 including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. |
| 32 | M&L for double charged vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished area of each tiles 1200 x 600 mm as in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 33 | Demolition of Stone slabs and tiles laid, bedded in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed. . |
| 34 | M&L 18 to 20 mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 35 | S&F in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed. |
| 36 | S & F in repair, Vitreous China wash down water closet pan (Pedestal Pattern in one-piece unit) 700 x 365 x 770 mm and Dual Siphonic flushing cistern(PVC), flat bottom, white including white plastic seat cover with mild steel CP hinging device, with suitable CP wash jet with 1.00 to 1.50m long tube fixed in repair incl making connection to inlet flush pipe and incl supply of 'P' or 'S' trap with extra long arm complete and making good the disturbed portion etc. all as specified and directed. |
| 37 | S&F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 38 | S&F in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete all as specified and directed. |
| 39 | S&F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete all as specified and directed. |
| 40 | S&F in repair, sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long complete all as specified and directed. |
| 41 | S&F in repair brass CP Sink Mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed. |
| 42 | S&F brass CP WHB Mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed. |
| 43 | S&F Brass CP Bath Mixer for with teliphonic shower rose screwed down for iron pipe and fixed in repair, complete all as specified and directed. |
| 44 | S&F in replacement stainless kitchen sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 45 | S&F in repair stainless steel plate rack of size 120x60x25 cm made with not less than 1.00 less than sheet complete all as specified and as directed . |
| 46 | S&F in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. |
| 47 | S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 48 | S&F in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 49 | S&F in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed. |
| 50 | Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm complete all as specified and directed. |
| 51 | Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm complete all as specified and directed. |
| 52 | S & F in repair of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 53 | S & F in repair of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 54 | S & F as in repair CPVC gate valves with left and right handle screwed both ends for CPVC pipe 20 mm bore complete all as specified and directed. |
| 55 | S & F as in repair CPVC gate valves with left and right handle screwed both ends for CPVC pipe 25 mm bore complete all as specified and directed. |
| 56 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting n exc 10cm girth complete all as specified & directed. |
| 57 | S&F in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified and directed. |
| 58 | S&F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified and directed. |
| 59 | S&F in repair 75 mm bore UPVC (SWR) bend with oval acess door, 'T' socket, reducer etc complete all as specified and directed. |
| 60 | S&F in repair 110 mm bore UPVC (SWR) bend with oval acess door T', socket, reducer etc complete all as specified and directed. |
| 61 | S&F in repair 4 mm thick 'E' board (classic) of size 600x600 mm false ceiling including & fixing of frame work made of special section MS sheet glavanised with zine coating , cellular nitro painting & consisting of angle cleats of size 25 mm wide, 1.60 mm thick with flange fixing to the ceiling with dash fastener 12.5 mmx40 mm long or with 4 mm dia GI wire or fixed with nails or bolts in GI channel 45x14x0.90 mm runner at 600 mm c/c including fixing of E board with ceiling section & perimeter of angle 25x25x0.50 mm thick including taking down the existing ceilling complete all as specified and directed. |
| 62 | Demolition of Brickwork or stone/bou-lder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed . |
| 63 | M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 64 | All as per item No. 63 above but except bricks complete all as specified and directed. (old bricks obtained from demolition shall br re-used) |
| 65 | M&L for brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed . |
| 66 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed. |
| 67 | M & L for 15 mm thick rendering on brick work or concrete surface in cement mortar 1:6, surface finished even and fair complete all as specified and directed. |
| 68 | M & L 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface, surface finished even and fair complete all as specified and directed. |
| 69 | M&L for 5mm thick rendering on fair faces of concrete surfaces in CM 1:3 finished rendering surfaces even and smooth (without using extra cement). |
| 70 | Supply only integral water proofing compound complete all as specified and directed . |
| 71 | M&L for preparation of wall and applying interior grade wall care putty 1 mm thick to make the surface smooth as specified and directed |
| 72 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified in SSR Part I and directed. |
| 73 | M&L preparation of new plastered surfaces of external wall and applying two coats of 1st quality exterior emulsion weather coat paints over a coat of alkali resistant priming paint complete all as specified and directed. |
| 74 | Cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain and removing the same at a distance exceeding 500 metre but not exceeding 1 Kilometre where directed, washing of the drain with water complete all as directed. |
| 75 | S&F in replacement looking mirror in size (450 X 600mm) mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified and directed. |
| 76 | M&L for complete removal of old existing treatment from plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over and including 1 mm thick layer of wall putty after preperation of surface of wall complete all as specified & directed. |
| 77 | S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacturer specification. |
| 78 | S & F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm complete all specified and directed. |
| 79 | S&F magnet catcher for cub board with 8mm dia steel ball, and brass body and striking plate including letting in complete all as specified and directed. |
| 80 | S&F Hasp and staple 100mm safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 81 | S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20 mm brass float valve with pvc ball complete all as specified and directed. |
| 82 | M&L for 65-70mm thick Pre-Cast Factory made RCC M-30 as in cover slab in different size of manholes, septic tanks or similar articles with plain faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface incl reinforcement and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, complete all as specified and directed. |
| 83 | Supply, laying and testing 150 mm Salt glazed stoneware drain pipes, grade ‘A’ complete all as specified and directed. |
| 84 | M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore of pipe complete all as specified and directed. |
| 85 | M & L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed . |
| 86 | S&F CP towel rack 600 mm long complete all as specified and directed and approved. |
| 87 | S&F CP Health Faucet with 1.20 mtr metalic Expandable tube & hook as approved complete all as specified and directed. |
| 88 | M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 89 | M&L for 60 mm thick pre polished rubber moulded coloured machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658- 2006 M-35 Grade with grey cement and no pigment complete all as specified and as directed. |
| 90 | M&L for hardcore of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces in broken stone or boulder complete all as specified and directed. |
| 91 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed Please Enable Macros to View BoQ information |
| 92 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 24 daysAug 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender