Tender For Providing Of New House Service Connection At Left Out Area In Ward No.04,,07,18,19 And 32- Zone No.2 Areasestimate Amount : Rs. 6.80 Lakhs
Tender Value
6.80 Lakhs
Estimated cost
Bid Submission
21 Jul 2026
13 days left
EMD
13600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Of New House Service Connection At Left Out Area In Ward No.04,,07,18,19 And 32- Zone No.2 Areasestimate Amount : Rs. 6.80 Lakhs
BOQ
| Sl. No. | Item Description |
| 1 | Labour for cutting open road for laying watermains or sewer.B.T. Roads (or) Maccadam road. |
| 2 | Earth work excavation and depositing on bankwith initial lead of 10 m and lift of 2 M in narrowtrenches having bed width 1.25m & below forlaying of pipes for water supply and sewerageworks in the following type of soils as directedby Departmental officers Hard stiff clay, stiff black cotton, hard red earth,shales, murram gravel, stoney earth and earth mixed with small size boulders and hard gravelly soil.SS20B |
| 3 | Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement (total earth work quantity - volume of the pipe) Cost of refilling |
| 4 | Electrofusion tapping saddle PE 80 blue, PN12.5 with female threaded metal insert of SS304 as per standards BS EN 12201 tested asper BS 6920 for drinking water in WRC-NSF ltd,UK. (Non Wrap with top loading type). Sizes:63mm to 315mm dia distribution HDPE pipes |
| 5 | Brass Ferrule as per IS 319 grade of sizes15mm, 20mm and 25mm size and threadedas per IS:1554 BSPT, ISO:7-1 to suit thecorresponding bore sizes of 15mm, 20mm and25mm dia size ( 1/2”, 3/4” and 1”) in the saddleConnection as per IS :1554 BSPT, ISO:7-1(SOR pg 42 item 3.i) WD-M O812 |
| 6 | Poly Propylene compression Male ThreadedAdaptor with metal insert of SS 304 as perstandards ISO 14236 and Tested as per BS6920 in WRC-NSF LTD, UK suitable for 20mm,25mm and 32mm OD MDPE pipes. (SOR pg 43 item V) WD -M0806 |
| 7 | Poly propylene 90 Degree Compression elbowwith compression joint at both ends as perstandards ISO 14236 and Tested as per BS6920 in WRC-NSF LTD, UK suitable for 20mm,25mm and 32mm OD MDPE pipes (SOR pg 42 item 3.iii) WD-M0806 |
| 8 | Poly Propylene compression Female ThreadedAdaptor with metal insert of SS 304 as perstandards ISO 14236 and Tested as per BS 6920in WRC-NSF LTD, UK for connecting 15mm,20mm and 25mm outlet points of Brass ferruleof sizes 15mm, 20mm and 25mm respectively. (SOR pg 42 WD-M0803) |
| 9 | MDPE PE 80 PN16 Blue pipe as per standardsISO 4427 and Tested as per BS 6920 in WRCNSFLTD, UK (SOR pg 43 item 3.vi) WD-0815 |
| 10 | U PVC ball valve with one side compression endand other side female end as per ISO 4422-4and Tested as per BS 6920 in WRC-NSF LTD,UK, size : 20mm ODx1/2”ID, 25mm ODX1/2”IDand 32mm OD X 3/4” ID (SOR pg 43 item 3.viii) WD-M0818 |
| 11 | Supply and delivery of protection box of size20cm x 30cm for fixing of Water Meter. Thebox should be rectangular base in constructionand material of construction should beweather resistant polyethylene (PE) blue /black .Reinforcement rips should be providedat the walls of the box. Box should be at twocomponents comprising body and lid. Lid shouldbe press fitted to the body. No hinges shouldbe used for opened /closed. Operation meterbox should be provided with built in lock. Thebody as inlet and outlet windows to pass thepipe through suitable for use with pipes of sizesup to 1” .Base of the box should be designedin such a way .That the box can be installedto the floor/wall using anchor Bolts / screwswithout grouting the entire base of the meterBox .Provision for fixing Name plate showingthe name of the Department etc., complete andas directed by the TWAD Board Officers. (SOR pg 43 item 3.ix) WD-M0821 |
| 12 | Supply and delivery of Multi Jet water meter with removal mechanism water meters confirming to ISO 4064 Class B or IS 779 Standards with type test certificates for Routine Test, IP 68 Test certificates issued by FCRI/NABL Accredited Lab. The water meter shall have magnetic or mechanical drivers or shall be versatile for installation in Horizontal position. The meters shall be hydrodynamically or hydrostatically balanced. The runner, runner chamber, pointers of the meter shall be as per ISO 4064 Class B specification. Dry dial excavated counter housing fully protected against flooding ensuring easy reading in all climatic conditions. The meters shall be inferential, Dry-Dial Type, Class B with straight reading Cyclometer with inbuilt filter basket, Meter body shall be of Brass body confirming to DCB2material specifications and suitable for drinking water applications. |
| 13 | 15 mm |
| 14 | Supply,delivery of 304 G stainless steel body 15 mm dia BSP threaded flow control valvewith minimum operation head of 10m and designed pressure levels of 3m head to 12 m head suitable for 15 lpm flow rate and ends suitable to fix MDPE pipes. |
| 15 | Lowering HDPE pipes and specials to trenchand laying to proper grade and alignmentand as directed by the TWAD Officers(SOR 171, item no.11b.ii)WD-W0429 (18.75+5%) |
| 16 | 50mm to 75mm dia (OD) HDPE pipe |
| 17 | Jointing HDPE Pipes and Specials by buttfusion welding / electro fusion weldingjoints using fusion equipment as per ISO21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire chargesfor butt fusion equipment power supplyarrangements etc., complete as perdirected by TWAD Board Officers.(SOR 184, item no.17.1)WD-M0615 (100.78+5%) |
| 18 | Supply, delivery and fixing of GI pipes for encasing in open drain including handling charges. Etc complete as per standard specifications and as directed by the Corporation Officers. (SOR 27, item no.5) WD-M0486 |
| 19 | Labour for drilling, cutting, Threading andFixing Ferrules in distribution pipes. (SOR 195, item no.3) (121.19+5%) |
| 20 | Add G.S.T. @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender