Tender For Restoration Of Rain Damages Of Mlip Changer Area Bassi From Ahc In Tehsil Shri Naina Devi Ji Distt. Bilaspur Hp (Sh: Repair And White Washing Of Inspection Hut At Bassi).Estimated Amount- 4,46,298/- Emd- 8926/- Time- Two Months
Tender Value
4.46 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
2 days left
EMD
8926
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bilaspur → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Rain Damages Of Mlip Changer Area Bassi From Ahc In Tehsil Shri Naina Devi Ji Distt. Bilaspur Hp (Sh: Repair And White Washing Of Inspection Hut At Bassi).Estimated Amount- 4,46,298/- Emd- 8926/- Time- Two Months
BOQ
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper by washing and scraping and sand papering the wall surfaces smooth including necessary repair to scratches complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 2 | Repair to plaster in patches of 2.50 5qm and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground with in a lead of 20 mtrs with Cement Mortar 1:4. complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 3 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brusing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty a required for making the surface, complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 4 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to 465 scratches etc. complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 5 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and fnal finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 6 | Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and 385 making the surface even with complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 7 | Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stoping complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 8 | Removing old paint from Steel and other metal surfaces & making the surface even complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 9 | Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt, dust and other foregin matters complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 10 | Painting two or more coats on G.1 Sheets with rea lymix paint of approved brand and manufecture on new work to give an even shade complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 11 | Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides withrequired EPDM rubber/neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically whereverrequired includig cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, complete in all respect as per entired satisfaction of Engineer-in-Charge. (Glazing, paneling and dash fasteners to be paid for separately) |
| 12 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete in all respect as per entired satisfaction of Engineer-in-Charge.. (cost of aluminium snap beading shall be paid in basic item.) |
| 13 | Providing & fixing anodized aluminium below mentioned fitting incuding anodized colour & shade with bolts & nuts &screws etc. complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 14 | Sliding door bolt 250x16mm |
| 15 | Tower bolt 150x10 mm |
| 16 | Handle 100 mm |
| 17 | Dismentalling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres lead (wooden/concrete joists to be measured and paid for separately) complete in all respect as per entired satisfaction of Engineer-in-Charge.. |
| 18 | providing. & fixing vitrified tiles 10 mm thick anti skid water proof stain and impect resistent heavy duty vertified tiles nitco or equivlant in flooring (600 x 600x10mm size) treads of steps laid on a bed of 12 mm thick cement mortor 1:3 (1cement:3 sand) jointed with cement slurry mixed with pigment to match the shade of tilesas required complete. (new) complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 19 | Vitreous china wash down water closet (Europian type) one piece seat Cera/Jaguar complete in all respect as per entired satisfaction of Engineer-in-Charge. |
| 20 | Providing and fixing bright finished brass 150mm Mortice latch with one dead bolt and a pair of levers, handles with necessary screws etc. complete. (Indian make of approved quality) complete in all respect as per entired satisfaction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender