Tender For Improvement & Widening Of Motorable Road To Village Sapni Km 7/900 To 8/360 (Sh:- Construction of Plain Cement Concrete U Shape Drain And providing and laying Wbm G-I,Ii,Iii And 20 Mm Thick Premix Carpet With Seal Coat From Km 7/900 To 8/3
Tender Value
32.16 Lakhs
Estimated cost
Bid Submission
12 Jul 2026
0 days left
EMD
64400
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement & Widening Of Motorable Road To Village Sapni Km 7/900 To 8/360 (Sh:- Construction of Plain Cement Concrete U Shape Drain And providing and laying Wbm G-I,Ii,Iii And 20 Mm Thick Premix Carpet With Seal Coat From Km 7/900 To 8/360(Under Badp Eatimated Cost: Rs 32,16,250/- Earnest Money Rs. 64,400/- Time :-Three Month
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 (three hundred point two) as per technical specification clause 303.1 (three hundred three point one) including carriage of materials in all lead, lifts as per the entire satisfaction and direction of Engineer-in -charge. |
| 2 | Providinb laying spreading and compacting stone aggregate of sizes 90-45mm (ninety to forty five millimetre) to water bound macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading- 1 as per technical specification clause 405 by mannual means including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. |
| 3 | Providing, laying, spreading and compacting stone aggregate of sizes 63-45mm (Sixty three to forty five millimetres) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN (eighty by hundred Kilo Newton) in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading-II by manual means as per technical Specification Clause 405 including carriage of material within all leads, lifts and other incidental charges and as per direction of Engineer-In-Charge. |
| 4 | Providing, laying, spreading and compacting stone aggregate of sizes 53-22.4 mm (fifty three to twenty two point four millimetres) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN (eighty by hundred Kilo Newton) in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading-III by manual means as per technical Specification Clause 405 including carriage of material within all leads, lifts and other incidental charges and as per direction of Engineer-In-Charge. |
| 5 | Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including clearing of road surface and spraying primer @ of 0.70-1.00 kg/sqm ( zero pointy seventy - one point zero kilogramme per square metre ) using mechanical means as per technical specification clause 502 including hauling of materials in all leads and lifts by all modes of transpotation and as per entire satisfaction and direction of Engineer-in-charge |
| 6 | Providing and applying tack coat with Bitumen emulsion confirming to IS:8887 (RS-1) using emulsion pressure distributor including preparing the surface and cleaning with mechanical broom on the prepared dry and hungry bitumnous surface @ 0.25 to 0.30 kg per sqm ( at the rate of zero point twenty five to zero point thirty kilogramme per square metre) as per Technical Specification Clause 503. including hauling of materials in all leads and lifts by all modes of transpotation and as per entire satisfaction and direction of Engineer-in-charge. |
| 7 | Providing, laying and rolling of open-graded premix carpet of 20 mm (twenty millimeter) thickness composed of 13.2 mm to 5.6 mm (thirteen point two millimeter to five point six millimeter) crushed stone aggregates using penetration grade bitumen VG-10 at the rate of 1.46 Kg per sqm (one point four six kilogram per square metre) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN (eighty-one hundred kilo newton) static roller capacity, finished to required level and grades to be followed by seal coat of Type B as per Technical Specification Clause 508 by manual means including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. |
| 8 | Providing and laying seal coat with penetration grade bitumen VG-10 at the rate of 0.68 Kg per sqm (zero point six eight kilogram per square metre) mixed with fine sand, sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B and as per Technical Specification Clause 510 by manual means including carriage of material in all leads, lifts as per the entire satisfaction and direction of Engineer-in-charge. |
| 9 | Earthwork in excavation for structures as per drawing and technical specifications clause 305.1 includingsetting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches wit excavated suitable material in ordinary soil up to 3 m depth. |
| 10 | Providing and laying plain cement concrete M-10 (ten) grade nominal mix 1:3:6 (one cement : three sand : six graded stone aggregate 40 mm (forty millimetre) nominal size) in open foundations and plinths as per drawings and technical specification for rural roads clause 802, 803, 1202 and 1203 and curing complete including the cost of form work and carriage of materials in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. |
| 11 | Steel work welded in built up sections,trusses and framed work, including cutting hoisting fixing in position and applying a priming coat of red lead paint In beams joists channels angles, tee flats with connection plates or angle cleats as in main and cross beems,hip and jack rafters purlins connected to common rafters and the like Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender