Tender For Repair And Maintenance Of Health Sub Center Building At Basha Block Kandaghat Distt. Solan (Deposit Work) (Sh:- Civil Work Of Building Portion )
Tender Value
7.84 Lakhs
Estimated cost
Bid Submission
10 Jul 2026
3 days left
EMD
16000
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Health Sub Center Building At Basha Block Kandaghat Distt. Solan (Deposit Work) (Sh:- Civil Work Of Building Portion )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 35 mm thick including ISI marked marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 2 | Providing and fixing Second class teak wood wire gauge shutters using galvanized mild steel wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 for door, windows and clear story windows with hinges and necessary screws 35mm (thirty five millimeter) thick Kiln seasoned and chemically treated hollock wood as per HP.PWD specification 1990 volume-I, including carriage of all labour equipment and material to various location through all modes of transportation in all leads lifts and all incidental charges. |
| 3 | Providing and fixing anodized Aluminum Sliding Door Bolts 300*16 (Three hundred* Sixteen) millimeters size anodized transparent or dyed to required shade and color with screws etc. Complete as per direction of Engineer in Charge as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 4 | Providing and fixing 200x10 mm size (two hundred into ten millimeter) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 5 | Providing and fixing aluminium handles, 125mm (One hundred twenty five) millimeters size ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per HP.PWD. Specification, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 6 | 100mm (One hundred ) millimeters size |
| 7 | Providing and fixing prepainted G.I frame of NCL SECLOR/ ELIXER or its equivalent as per specification as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 8 | Providing and fixing prepainted G.I frame of NCL 5000 / ELIXER 3000 series or its equivalent as per specification as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 9 | Brick work with common burnt clay machine moulded with F.P.S.(non modular) perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 10 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts , including all incidental charges. |
| 11 | Providing and laying Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 12 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per H.P. PWD. specification including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 13 | Providing and laying Vitrified tiles in different sizes 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete as per HP.PWD. Specification and as per direction of Engineer in Charg including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 14 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge |
| 15 | 40 (Forty) millimeters thick with 20 mm nominal size stone aggregate Cement concrete flooring in 1:2:4 (One cement isto Two sand isto Four graded crushed haed stone aggregate 20 (twenty) millimeters nominal size) laid in One layer finished with floating coat of neat cement in all floors up to all heights, levels complete as per HP.PWD. specification including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges. |
| 16 | Providing and fixing 0.60mm thick prepainted steel sheet (TATA Durashine) in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster(RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating fixing with prepainted iron J or L hooks, bolts and nuts 6mm diametre with prepainted limpet and rubber washers complete with all accessories as per H.P.PWD. Specification including carriage of all labour, equipments and materials to various locations through all modes of transportation in all leads and lifts, including all incidental charges. |
| 17 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. |
| 18 | 15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior/exterior plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement Mortar 1:6 (1Cement:6 Sand )as per HP.PWD. Specification including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts. |
| 19 | Providing and fixing water closet squatting pan (Indian approved quality & make and as per the direction of Engineer-in-charge |
| 20 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required as per HP.PWD specification including carriage of all labour, equipment and material to various location through all modes of transportation in all lead and lift, including all incidental charges. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender