Tender For Supply, Delivery And Installation Of Non-Clog Sewage Submersible Pump Along With Repairing Of Control Panel Of Sludge Discharge Pumps At The Water Treatment Plant Of Surface Water Based Piped Water Supply Scheme Under Panskura-Ii Block In
Tender Overview
Project Description
Tender for Supply, Delivery And Installation Of Non-Clog Sewage Submersible Pump Along With Repairing Of Control Panel Of Sludge Discharge Pumps At The Water Treatment Plant Of Surface Water Based Piped Water Supply Scheme Under Panskura-Ii Block In The District Of Purba Medinipur Under Midnapore Mechanical Division, P.H.E. Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of the existing damaged non-clog sewage submersible pump motor set after disconnecting all electrical and mechanical connections, by deploying skilled personnel, and keeping the dismantled components safely at site, complete in all respects as per the direction of the E.I.C. |
| 2 | Lifting of damaged Non-Clog Sewage Submersible Pump by engaging skilled labour from sump including disconnection of delivery pipe, cable etc. complete |
| 3 | Supply and delivery of Non Clog Sewage Submersible Pump set Conforming to IS:9137:1979 for Testing & Tolerances including Aoto Coupling with integreted Duckfoot bend ,Cable, Gi Guide Pipe and MS Lifting Chain for filter back wash waste water Sludge transfer Pumps and Waste water Clarifier Sludge Discharge Pumps with the following specification:-a) Discharge- 20 Cum/hrb) Head- 20 mtr(Make:- Jasco Pump Pvt Ltd / Flowmore limited/ MBH Pumps (Guj) Pvt Ltd/ Any other Vendor Approved)MATERIAL OF CONSTRUCTION:-Motor body. Top Cover , Bearing Housing , Oil Chamber, Suction Bell - C.I FG:260 as per :210-2009Pump Casing - C.I FG:260 as per :210-2009Impeller- S.S. CF8M. ASTM, A351-2016Pump /Motor Shaft- S.S AISI-410,ASTM, A 479-2018 type 410Mechanical Seal (Primary/Secondary) - Sic vs Sic & Tc vs TcBall Bearing/\\"O\\" ring- C.S ball bearing / Nitrile rubberMotor Specification:-HP/Kw- 7.5/5.60Synchronous Speed- 3000Supply- 415 V ±10 %, 50 Hz, ± 5 % A.C supplyMethod of Starting - DOLClass of Insulation - \\"F\\" ClassType:- Totally enclosed wash down (TEWD) type squirrel cage dry induction motorN.B. Test Certificate, Materials of Construction Certificate and Performance Chart should be submitted before delivery of Non-Clog Sewage Submersible Pump |
| 4 | Supply and delivery of Non Clog Sewage Submersible Pump set Conforming to IS:9137:1979 for Testing & Tolerances including Aoto Coupling with integreted Duckfoot bend ,Cable, Gi Guide Pipe and MS Lifting Chain for Waste Water recycle pumps with the following specification:-a) Discharge- 110 Cum/hrb) Head- 20 mtr(Make:- Jasco Pump Pvt Ltd / Flowmore limited/ MBH Pumps (Guj) Pvt Ltd/ Any other Vendor Approved)MATERIAL OF CONSTRUCTION:-Motor body. Top Cover , Bearing Housing , Oil Chamber, Suction Bell - C.I FG:260 as per :210-2009Pump Casing - C.I FG:260 as per :210-2009Impeller- S.S. CF8M. ASTM, A351-2016Pump /Motor Shaft- S.S AISI-410,ASTM, A 479-2018 type 410Mechanical Seal (Primary/Secondary) - Sic vs Sic & Tc vs TcBall Bearing/\\"O\\" ring- C.S ball bearing / Nitrile rubberMotor Specification:-HP/Kw- 20/14.92Synchronous Speed- 1500Supply- 415 V ±10 %, 50 Hz, ± 5 % A.C supplyMethod of Starting - STAR-DELTAClass of Insulation - \\"F\\" ClassType:- Totally enclosed wash down (TEWD) type squirrel cage dry induction motorN.B. Test Certificate, Materials of Construction Certificate and Performance Chart should be submitted before delivery of Non-Clog Sewage Submersible Pump |
| 5 | Lowering and installation of the above non-clog sewage submersible pump at its existing position by engaging skilled labour, including connection with delivery pipe and electrical cable connection to the control panel, supplying all necessary materials, ensuring proper alignment, testing and commissioning, complete in all respects as per direction of E.I.C. |
| 6 | Control Panel:-Dismantling of Control Panel of Non-Clog Submersible Sewage Pump including opening of panel for inspection and fault detection as per direction of EIC. |
| 7 | Supply and delivery of the following materials at site:-Ammeter Selector Switch, l0Amp. |
| 8 | Voltmeter Selector Switch, l0Amp. |
| 9 | 63 A, 415 V, 50 Hz, C Curve, IS/IEC compliant MCB, 3P |
| 10 | 63 A, 415 V, 50 Hz, C Curve, IS/IEC compliant MCB, 4P |
| 11 | Voltage Monitoring Relay(Phase Failure, Unbalance, PhaseSequence, Under Voltage and Over Voltage Protection With Digital Display) (Make- Siemens/Approved Make) |
| 12 | PMU-RO Pump Monitoring Unit with communication interface. |
| 13 | Current Transformer (CT), Ratio 30/5A, accuracy class 1.0 or better. |
| 14 | Current Transformer (CT), Ratio 60/5A, accuracy class 1.0 or better. |
| 15 | Micro processor based , Multifunction LCD display meter of Liquid level Controllers. (Make- minilec/Approved make) |
| 16 | 16 Sq mm ,three core, Aluminium conductor , Armoured cable , PVC insulated Power cable conforming to IS 7098 (Part-I) |
| 17 | Internal wiring of Control Panel using PVC insulated copper wire including supply of lugs, ferrules and other accessories complete |
| 18 | Fitting and fixing of the following control panel materials, including all necessary accessories complete in all respects as per direction of the E.I.C. |
| 19 | Servicing of Control Panel including tightening of terminals, cleaning of panel components and re-assembling complete. |
| 20 | Testing and commissioning of Control Panel after repairing including trial run of pump as per direction of EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysBid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender