Tender For Special Repair Of Bldg No 189 Geg Of 506 Abw, Jabalpur Under Ge (East) Jabalpur
Tender Value
1.34 Crore
Estimated cost
Bid Submission
01 Aug 2026
23 days left
EMD
2.10 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Bldg No 189 Geg Of 506 Abw, Jabalpur Under Ge (East) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and directed. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:6 and to be finished even and smooth (without using extra cement). Complete all as specified and directed. (height upto 12.50m) |
| 3 | M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 as in ceiling (height upto 12.50m) |
| 4 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of wall in CM 1:4 and to be finished even and smooth (without using extra cement). Complete all as specified and directed. (WPC measured and paid seperately) (height upto 12.50m) |
| 5 | Supply only integral waterproofing compound |
| 6 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework & precast concrete articles. Complete all as specified and directed. |
| 7 | M&L FLY ASH Brick work using old bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 8 | M& Brickwork with old sizeflyash bricks, straight or curved on plan to any radius inhalf brick thick walls, built in built in cement mortar 1:4 complete all as specified and directed. |
| 9 | M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection finished even and fair & smooth without using extra cement complete all as specified and directed. |
| 10 | M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed andsealed with sealing compound, Grade ‘A’ |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises. Complete all as specified and directed. |
| 12 | Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed. |
| 13 | M&L for PCC 1:2:4 (Type B1 using 20 mm graded aggregate) levelling course, to match the undulations of sub base complete all as specified and directed. |
| 14 | M&L for Vitrified tile flooring 9-10mm thick (square/rectangular) area of each tile exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes. Complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 15 | All as per item No 14 here-in-before as in skirting/dado & including rendering 10 mm thick in cement mortar 1:4. Complete all as specified and directed |
| 16 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes. Complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 17 | M&L for Glazed Coloured Ceramic Tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick in vertical surface such as dado / skirting / risers to steps etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including rendering 10 mm thick in cement mortar 1:4. Complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 18 | M&L for Non Skid Coloured Ceramic Tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed or bedding layer of 1:6 cement mortar for laying floor finishes. Complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 19 | All as per item No 18 here-in-before as in skirting/dado & including rendering 10 mm thick in cement mortar 1:4. Complete all as specified and directed |
| 20 | Demolition of stone slabs and tiles of any escription or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as directed. |
| 21 | M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick n steps, jambs, pillars, window-cills, wash basin, cooking platforms and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite bedded and jointed with grey cement slurry and pointed to match the shade of granite stone grinding and polishing types including screed bed 15 mm thick in CM 1 : 6 Complete all as specified and directed. |
| 22 | M&L Machine cut Cudappa stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed 15 mm thick in CM 1 : 6 Complete all as specified and directed . . |
| 23 | M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform & other similar situations. Complete all as specified and directed. |
| 24 | Taking down Chowkhats or frames not exc. 1.50 sqm each with shutters (without taking off shutters from the frame) and removing to store. Complete all as specified and directed. |
| 25 | Taking down Chowkhats or frames exc. 1.50 sqm but not exc. 4 sqm each with shutters (without taking off shutters from the frame) and removing to store. Complete all as specified and directed. |
| 26 | Taking down shutter of any decrti on not exe 1 sqm complete as specifed and directed |
| 27 | Taking down shutter of any decrti on exe 1 sqm but nexc 2 sqm complete as specifed and directed |
| 28 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing |
| 29 | S&F Factory made solid panel PVC door shutter30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottomrails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channelhaving a PVC sheet strip of 20mm width stuck inside with solvent cement for stilesand plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to befitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheetbeading, and joined together with solvent cement, suppling & fixing in the frame atsite as per specification & drawing. |
| 30 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 31 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement |
| 32 | S&F Providing and fixing of single rebate openable/fixed windows (Eco 4000) made of galvanized steel colour coated/powder coated (base steel as per IS 513 of “D\\" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) with total thickness of coating 0.58 mm, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm, centre mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter, and 12 mm provision for guard bars/grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 4 mm thick plain clear glass, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 12mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. co |
| 33 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 34 | Providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3 mm (+- 0.2 mm). Window profile with hollow section with multi chamber. Frame (88 mm x 52 mm), sliding sash (42 mm x 67 mm). Sliding mesh Sash (42 mm x 57 mm), Sliding interlock (One vertical length in each shutters) (45.5 mm x 28 mm), Glazing bead (24.5 mm x 16 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 +– 0.2 mm thick, galvanized steel Frame (30 mm x 18 mm) 02 nos, sliding sash (30 mm x 18 mrn), sliding mesh sash (26 mm x 10 mm) profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, [Hardware : Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40 mm & required accessories.] Note : The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.) (Area n.exc 2.00 sqm each.) |
| 35 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, includingdrilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in requiredprofile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi pointlocking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 36 | S&F 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. Complete all as specified and directed. |
| 37 | S&F Solid PVC Wall Lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 38 | S&F 4.8 mm Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane |
| 39 | S&F 12 mm thick 'Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 40 | S&F Mortice lock,vertical type size 100 mm 4 lever Make- Godrej as complete all as specified and directed |
| 41 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, Chajja, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and as directed. |
| 42 | Forming jambs, etc., to openings, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete New work built in CM(1:4) or cement lime mortar (1:2:9) |
| 43 | Taking down steel tubing and connections incl cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-charge. |
| 44 | All as per srl item No 43 above but 20mm bore pipe all as specified and directed by Engr-in-charge. |
| 45 | Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. ® |
| 46 | S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-charge. Make:- Jandal/ Prakash /TATA |
| 47 | All as per srl item No- 89 above but 20mm dia all as specified and directed by Engr-in-charge. |
| 48 | M&L for Welded steel wire fabric supplied and fixed complete to wood or steel members weight not exc 4 kg/sqm complete all as sepecifed (height upto 12.50m) |
| 49 | Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore of pipe complete all as specified and directed. |
| 50 | S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified in SSR Part-I, including dismantling of old u/s water storage tank and removing to store. Complete all as specified and directed. |
| 51 | S&F ball valves for 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed. (Minimum weight 210 gms). Complete all as specified and directed. |
| 52 | S&F in repair, Brass chromium plated Wash Basin Mixer with raised 'J' shaped swinging spout (Table Mounted Model) with 450 mm long braided hoses for 15 mm bore of pipe. Complete all as specified and directed. Make-Jaquar Cat Part No.CON-319KNB or equivalent. |
| 53 | S&F in repair, Chromium plated Angular Stop Cock with wall flange for 15 mm bore of pipe. Complete all as specified and directed. |
| 54 | S&F in repair, Chromium plated Two-way Bib Cock for 15 mm bore of pipe. Complete all as specified and directed. |
| 55 | S&F in repair 15 mm bore, Fancy type, Chromoium plated Bib taps, cast aopper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. Complete all as specified and directed. |
| 56 | S&F in repair, 15 mm dia of bore, fancy type, chromium plated stop valves, cast copper alloy, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. Complete all as specified and directed. |
| 57 | S&F in repair, 32 mm bore, PVC waste pipe for Wash Basin/Kitchen Sink etc. Complete all as specified and directed. |
| 58 | S&F in repair, 32 mm dia of bore, Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed. Complete all as specified and directed. |
| 59 | S&F in repair, Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube & ABS wall hook including making connections & fixed in position complete in all respect as specified. |
| 60 | S&F in repair, Brass Chromium Plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges etc. Complete all as specified and directed. |
| 61 | S&F in repair, Sheet Glass Shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. Complete all as specified and directed. |
| 62 | S&F in repair, Toilet paper holder with flat recessed type stainless steel. Complete all as specified & directed. |
| 63 | S&F in repair, 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws & cup washers. Complete all as specified and directed. |
| 64 | S&F in repair, Europian WC, Single Piece, Vitreous China with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing all Accessories, Size: 360 mm x 655 mm x 765 mm, P Trap-180 mm. Complete all as specified and directed. Make-Jaquar Cat Part No CNS-WHT-757NS300SPPZ or equivalent. |
| 65 | S&F in repair, Vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain & plug & porcelain stopper but including bracket & including supply & fixing of 32 mm dia of bore, brass chromium plated waste coupling. Complete all as specified and directed. |
| 66 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed. Make:- Symet/ Prayag |
| 67 | Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 68 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed. |
| 69 | S&F 110 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed. |
| 70 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed. |
| 71 | S&F 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed. |
| 72 | S&F 160 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls. Complete all as specified and directed. |
| 73 | S&F in repair 100mm dia Stack clampsout of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified |
| 74 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 75 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 76 | S&F PVC (SWR) bends ISI marked any radius of 160 mm bore with access door complete all as specified and directed. |
| 77 | S&F PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed |
| 78 | S&F in repair PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed |
| 79 | S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed |
| 80 | S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar 1:6 , all as specified and directed by Engr-in-charge. |
| 81 | S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed in 20 mm bore dia of pipe. Complete all as specified and directed. |
| 82 | S&F in repair, Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm. Complete all as specified and directed. |
| 83 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 84 | S&F Rolled mild steel Roof trusses (framed), trussed purlins crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. GDE Fe410-0 or Fe 310-O ( Height of Bldg upto 12.50mtr) |
| 85 | M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment. ( Height of Bldg upto 12.50mtr) |
| 86 | Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concretean d screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and Fe-290 Gde E-165 all as specified and directed. |
| 87 | S&F Steel work in tubular section including special shaped washer etc. complete usingERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 ( Height of Bldg upto 12.50mtr) |
| 88 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, includingNainital or similar pattern roof coverings and stacking at site where directed and removal of debris to a outside MOD land and depositing where directed complete all as directed. |
| 89 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.( Height of Bldg upto 12.50mtr) |
| 90 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. ( Height of Bldg upto 12.50mtr) |
| 91 | S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip & straight flashings (length & girth as fixed) with grade of zinc coating 275 of 1.00mm thick. ( Height of Bldg upto 12.50mtr) |
| 92 | S&F Poly corbonate corrugated sheet 2mm thick with color coated and water proof as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. ( Height of Bldg upto 12.50mtr) |
| 93 | Demolition Wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets |
| 94 | M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600x600mm compressing of GI powder coated main runner of dimension 39mmx24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.4mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HPSC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. (Make : Armstrong/Everest). ( Height of Bldg upto 12.50mtr) |
| 95 | S & F in repairs Rough cast wired glass 6.4mm, exc 1.5 Sqm and glazing with oil putty and fixing arrangements with steel frame with clips etc complete all as per directed by Engr-in-Charge complete Note : height upto 12mtrs |
| 96 | EPOXY FLOORING THICKNESS 5 MM 1. SUBSTRATE REQUIREMENTS : Concrete or screed substrate should be a minimum of 25 N/mm2 ,free from laitance ,dust and other contamination. the substrate should be surface dry and moisture shall be 5% and free from rising damp and ground water pressure. grinding and remove all the dust by vaccum Primer : Supply and apply of Epoxy primer HFP 130 /HFP 120 Over the Prepared surface and allow it to dry. Epoxy Under lay : - Providing and applying of Apcoflor LSC 3XI ,Providing and applying 4.00 mm thick over the primed substrate using ,Apcoflor LSC 3 XL of make Asian Paints, 3 component ,stain finish ,self smoothing ,Non tainting and non dusting ,Hard-wearing Abrasion resistant high chemical resistance grade available ,typical use in dry process areas subject to medium duty traffic include clean roos requirement, Apcoflor LSC 3 XI shall be laid at using notch tools followed by spike roll to release all entraped voids and the fully cured topping shall exhibits the typical properties as mentioned in the technical specification on the performance critiria and complete strictly following the coverage and methodology. Supply mixing and appling a Apcofloor SL Epoxy of Asian Paints is a self Paints ,is self smoothing epoxy resin floor finish applied at 1 mm thickness over the Epoxy underaly , Notch shall be used to spread the mixed Epoxy followed by the spike rolling to release the entraped air the cured topping shall attain the following properties ,complete as per the manufacturer instruction including removal of existing Epoxy coating and oiling /greasing flooring adhered to concrete floors ,preparation of concrete floor surfaces including removal of adhesives,ingress in concrete,paint splashes,curing compounds,oil and grease,etc and rectifying undulations to smooth surface by light mechanical scrubbing,grinding or grit/captive blasting followed by vaccum cleaning to remove dust,removal of moisture content,repair the undulations if any as directed Note : work shall be executed by company authorised Applicator |
| 97 | All as item no98 here in before but 100 mm wide yellow lines |
| 98 | Racking out of old existing sealent compound and back up road the existing Dummy joints by special tools like cutting blades /machines ,wideing by 2mm by using joint cutting blades of appropriate size ,straight and smooth edges .joint cleaned thoroughly with application of compressed air,joint shall be made dry ,vacuum cleaned and free of dirt oil ,vegetation and other debris .application of two coat of primer with thin brush by forward and backward at an interval of 30 min before pacing the backup rod and pouring the sealent ,thereafter filled with closed cell, medium density, cross linked polythlene foam back road of 8 mm dia for complete length of joint sealent meeting the requirement mentioned in BS-5212,BS-4254 and EN-141875-2003 with minimum movement Accommodation factor (MAF) +/-30% |
| 99 | Racking out of old existing sealent compound and back up road the existing Construction joints by special tools like cutting blades /machines ,wideing by 2mm by using joint cutting blades of appropriate size ,straight and smooth edges .joint cleaned thoroughly with application of compressed air,joint shall be made dry ,vacuum cleaned and free of dirt oil ,vegetation and other debris .application of two coat of primer with thin brush by forward and backward at an interval of 30 min before pacing the backup rod and pouring the sealent ,thereafter filled with closed cell, medium density, cross linked polythlene foam back road of 12 mm dia for complete length of joint sealent meeting the requirement mentioned in BS-5212,BS-4254 and EN-141875-2003 with minimum movement Accommodation factor (MAF) +/-30% |
| 100 | Racking out of old existing sealent compound and back up road the existing Expansion joints by special tools like cutting blades /machines ,wideing by 2mm by using joint cutting blades of appropriate size ,straight and smooth edges .joint cleaned thoroughly with application of compressed air,joint shall be made dry ,vacuum cleaned and free of dirt oil ,vegetation and other debris .application of two coat of primer with thin brush by forward and backward at an interval of 30 min before pacing the backup rod and pouring the sealent ,thereafter filled with closed cell, medium density, cross linked polythlene foam back road of 30 mm dia for complete length of joint sealent meeting the requirement mentioned in BS-5212,BS-4254 and EN-141875-2003 with minimum movement Accommodation factor (MAF) +/-30% |
| 101 | Demolition of Cement Concrete (reinforced) of any description & in any position not otherwise specifically provided for. Complete all specified and directed. |
| 102 | M&L for 150 mm thick of concrete Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing com pound, Grade ‘A |
| 103 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound |
| 104 | M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less , finished even & smooth without using extra cement |
| 105 | M&L Granolithic concrete 1:1:2 floor topping 30mm thick; laid over PCC subfloors etc. & finished to an even & fair surface |
| 106 | M&L Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors & pavings, & finished even & smooth (except metallic hardner) Thickness of topping 20 mm thick |
| 107 | Supply only metalic floor hardener complete. |
| 108 | Dismantling structural steel work including doors, gates but excluding framed truss etc. |
| 109 | M&L Steel roilling shutters 1,25 mm thick with ball bearing, as specified including top cover,an-choring rod,hasp and staple, Safety lever locks mild steel with 4 levers for rolling shutters and all accessories complete including shop coat of primer erected in position as indicated, but gear operated type with bevel gear box and crank complete all as spd and directed, Note :- AS PER IS -6248-1979 (a) Cold -rolled steel strips - used for rolling shutter lath section shall conform to Temper No -05 ,Dead soft quality of IS : 4030-1973 (b) Guide channels ,brackets and lock plate shall be of hot -rolled steel of thickness not less than 3.15 mm and shall be free from surface defect and edges cleanly sheared (c) mild steel pipe used for the suspension shaft of the roller shall be heavy duty pipe for mechanical proposes and shall conform IS-1161-1968 (d ) cast iron casting used for roller pully wheels ,u clamps and cracks, burns etc conform to grade 15 of IS-210-1970. (e) the spring used in the roller for counterblancing the rolling shutter shall be made either from high tensile spring steel wire or flat spring steel strips as per IS 4454 (Part-I)-1975 (F) lock plate of riveted construction of made of mild steel sheet noy less than 3.15 mm thickness with mild steel angle section of not less than 35x35x5 mm size of bottam shall be interlocked with bottom most lath section of curtain so as to provide contact against the sill when closed. the lock plate shall be provided with pulling handle on handle for widths up to 2.5 m and two handle for widths of above 2.5 m. pulling handle shall be fixed on both the interior and exterior side of lock plate. (g) Guide channels shall be of mild steel deep channel section(deep of channel depend of wide of rolling shutter up to 3.5 m width guide channel 65 mmdepth , 3.5 to 8 m width guide channel 75 mm depth ) and thickness of the not less than 3.15 mm .the depth of guide should be such that there is sufficient clearance between the curtain and the inner surface the guide to avoid any rubbing or obstruction for free inovement of the curtain at least 40mm for 3.5 width and 60 mm of greater width and there shall be a clearance 10 mm minimum between guide wall and the end clips of the curtrain to permit free movement of the curtain under the normal wind pressure. Please Enable Macros to View BoQ information |
| 110 | M&L Steel roilling shutters 1,25 mm thick with ball bearing, as specified including top cover,an-choring rod,hasp and staple, Safety lever locks mild steel with 4 levers for rolling shutters and all accessories complete including shop coat of primer erected in position as indicated, but gear operated type with bevel gear box and crank complete all as spd and directed, Note :- AS PER IS -6248-1979 (a) Cold -rolled steel strips - used for rolling shutter lath section shall conform to Temper No -05 ,Dead soft quality of IS : 4030-1973 (b) Guide channels ,brackets and lock plate shall be of hot -rolled steel of thickness not less than 3.15 mm and shall be free from surface defect and edges cleanly sheared (c) mild steel pipe used for the suspension shaft of the roller shall be heavy duty pipe for mechanical proposes and shall conform IS-1161-1968 (d ) cast iron casting used for roller pully wheels ,u clamps and cracks, burns etc conform to grade 15 of IS-210-1970. (e) the spring used in the roller for counterblancing the rolling shutter shall be made either from high tensile spring steel wire or flat spring steel strips as per IS 4454 (Part-I)-1975 (F) lock plate of riveted construction of made of mild steel sheet noy less than 3.15 mm thickness with mild steel angle section of not less than 35x35x5 mm size of bottam shall be interlocked with bottom most lath section of curtain so as to provide contact against the sill when closed. the lock plate shall be provided with pulling handle on handle for widths up to 2.5 m and two handle for widths of above 2.5 m. pulling handle shall be fixed on both the interior and exterior side of lock plate. (g) Guide channels shall be of mild steel deep channel section(deep of channel depend of wide of rolling shutter up to 3.5 m width guide channel 65 mmdepth , 3.5 to 8 m width guide channel 75 mm depth ) and thickness of the not less than 3.15 mm .the depth of guide should be such that there is sufficient clearance between the curtain and the inner surface the guide to avoid any rubbing or obstruction for free inovement of the curtain at least 40mm for 3.5 width and 60 mm of greater width and there shall be a clearance 10 mm minimum between guide wall and the end clips of the curtrain to permit free movement of the curtain under the normal wind pressure. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysAug 08, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 30 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender