Tender For Repair Of Internal Wiring Etc At Jcos/Or Accn Under Age E/M-I Of Ge (N) Mamun.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
2 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair Of Internal Wiring Etc At Jcos/Or Accn Under Age E/M-I Of Ge (N) Mamun.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed. |
| 2 | Point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with 1.2mm thick steel pressed steel sunken box of adequate size and 3mm thick plastic laminated sheet cover fixed with brass screws complete including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. |
| 3 | All as per Ser item No 2 here-in-before but for one 5/6 Amp socket outlet point on same board controlled by one switch. |
| 4 | All as per Ser item No 2 here-in-before but for one 5/6 Amp socket outlet points on independent board controlled by one switch. |
| 5 | All as per Ser item No 2 here-in-before but for one light point controlled by two 2 way switch, 5/6 Amp, 240 volts. |
| 6 | All as per Srl item No 2 here-in-before but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. |
| 7 | Point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through exisitng PVC conduit and connected to common earth dolly with 1.2mm thick steel pressed steel sunken box of adequate size and 3mm thick plastic laminated sheet cover with brass screws complete including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. |
| 8 | All as per Ser item No 7 here-in-before but for one light point controlled by two 2 way switch, 5/6 Amp, 240 volts. |
| 9 | All as per Ser item No 7 here-in-before but for one 5/6 Amp socket outlet point on same board controlled by one switch. |
| 10 | All as per Ser item No 7 here-in-before but for one 5/6 Amp socket outlet points on independent board controlled by one switch. |
| 11 | All as per Srl item No 7 here-in-before but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. |
| 12 | Point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through and incl PVC rigid concealed conduit medium grade (ISI Marked) of dia not less than 20mm and 1.5mm thick and connected to common earth dolly with and including 1.2mm thick GI/MS modular sunken box of required size with support frame (inner/outer) for mounting modular switch , sockets etc including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. |
| 13 | All as per Ser item No 12 here-in-before but for one 5/6 Amp socket outlet point on same board controlled by one switch. |
| 14 | All as per Ser item No 12 here-in-before but for one 5/6 Amp socket outlet points on independent board controlled by one switch. |
| 15 | All as per Srl item No 12 here-in-before but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. |
| 16 | Point wiring using 3x1.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade (Phase, neutral and earth wire) with proper colour coding drawn through existing PVC rigid concealed conduit and connected to common earth dolly with and including 1.2mm thick GI/MS modular sunken box of required size with support frame (inner/outer) for mounting modular switch, sockets etc including cutting chases grooves for concealed wiring for light/fan/bell point controlled by one switch and making good (in CM 1:4) the surface as per existing complete all as specified and directed. |
| 17 | All as per Ser item No 16 here-in-before but for one light point controlled by two 2 way switch, 5/6 Amp, 240 volts. |
| 18 | All as per Ser item No 16 here-in-before but for one 5/6 Amp socket outlet point on same board controlled by one switch. |
| 19 | All as per Ser item No 16 here-in-before but for one 5/6 Amp socket outlet points on independent board controlled by one switch. |
| 20 | All as per Srl item No 16 here-in-before but for one 15/16 Amp socket point with 3x2.5 Sqmm FRLS PVC insulated unsheathed multistranded copper conductor. |
| 21 | 25mm dia rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc and making good (in CM 1:4) the surface as per existing complete all as specified and directed. |
| 22 | Modular one way switch 10 Amp, 1 module, complete all as specified and directed. |
| 23 | Modular switch button 16A, single pole 1 module front operated as per sample, complete all as specified & directed. |
| 24 | Modular two way switch 6 Amp, 1 module front operated as per sample, complete all as specified and directed. |
| 25 | Modular socket 10 Amp with shutter, 2 module, complete all as specified and directed. |
| 26 | Modular socket 16 Amp, multi purpose with shutter, 2 module, as per sample, complete all as specified and directed. |
| 27 | Modular bell push switch, 6 Amp, AC 230 Volts, 1 module, complete all as specified and directed. |
| 28 | Modular fan step regulator, suitable for 1200/1400mm sweep ceiling fan hum free, 1 module including necessary connection, as per sample, complete all as specified & directed. |
| 29 | Switch piano flush button single pole one way 5/6 Amp 240 volts complete all as specified and as directed. |
| 30 | Switch piano flush button single pole two way 5/6 Amp 240 volts complete all as specified and as directed. |
| 31 | Switch piano flush button single pole one way 15/16 Amp 240 volts complete all as specified and as directed. |
| 32 | Socket outlet 2 in 1, 3 pin, 6 Amps, flush type with shutters, 240 volts complete all as specified and as directed. |
| 33 | Socket outlet 2 in 1, 3 pin, 6 and 16 Amps, flush type with shutters, 240 volts complete all as specified and as directed. |
| 34 | Bell Ding Dong AC 230 Volt, single pole, complete all as specified and directed. , |
| 35 | Bell push, flush type, 5/6 Amp AC 230 Volt etc, complete all as specified and directed. |
| 36 | Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. not less than 100W as reqd., complete all as specified and directed. |
| 37 | Stepped rotary type electronic fan regulator for BLDC fan, fixing on the existing phenolic laminated sheet etc complete all as specified and directed. |
| 38 | Ceiling rose 3 terminal bakelite 65mm x50mm surface type, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 39 | Lamp holder, PVC/ Polycarbonate type with back plate, straight/ angular suitable for batten fittings, complete all as specified and directed. |
| 40 | LED lamp 15W, 230V retrofit suitable for lamp holder as required, complete all as specified and directed. |
| 41 | PVC round junction box cover not less than 8cm dia, 0.3cm thick incl fixing with suitable size of machine screw complete all as specified and directed. |
| 42 | Taking down carefully unsv copper/aluminium sub main wiring of any size including old broken steel/PVC conduit, removing materials to store for keeping in safe custody for taking credit complete all as specified. |
| 43 | Sub main wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2 x 6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor cable green colour of size 6 sqmm as earth lead in & including concealed rigid medium grade PVC conduit not less than 20mm 1.5mm thick dia ISI marked with all accessories and making good disturbed surface of wall/ floor with cement mortar 1:4 and finishes to match exisiting surface, complete all as required at site or directed. |
| 44 | All as per item No 43 here in before but size of 2 x 6 Sqmm drawn in concealed conduit, complete all as required at site or directed. |
| 45 | Sub main wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2 x 4 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor cable green colour of size 4 sqmm as earth lead in & including concealed rigid medium grade PVC conduit not less than 20mm 1.5mm thick dia ISI marked with all accessories and making good disturbed surface of wall/ floor with cement mortar 1:4 and finishes to match exisiting surface, complete all as required at site or directed. |
| 46 | MCB DB, SPN, 12 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 47 | MCB DB, SPN, 8 way sheet metal enclosures double door 230 V AC, 50 Hz AC with IP 54 and IK 09 rating having fully insulated copper busbar of rating 200 Amps, insulated neutral bar, earth bar and cable ties for cable management including polyuthrene gasket complete complete in all respect flushed in wall including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 48 | 4 way distribution board iron clad, double door with IP-43 IK-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 V, 100 Amps, 16 kA of the same make as of distribution board, making connection with suitable size thimbles & including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 49 | 8 way distribution board iron clad, double door with IP-43 IK-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s, complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 V, 125 Amps, 16 kA of the same make as of distribution board, making connection with suitable size thimbles & including cutting chases on wall for taking out old unsv DB and fixing of new DB and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 50 | MCB, SP, AC, 240 volts \\"C\\" series capacity of 6-32 Amps, 10kA and making connections in existing DB, testing and commissioning complete all as specified & directed. |
| 51 | MCB, SPN, AC, 240 volts \\"C\\" series capacity of 40-63 Amps, 10kA and making connections in existing DB, testing and commissioning complete all as specified & directed. |
| 52 | Replacement of MCCB 63 Amps, 3Pole 415Volts, 16kA with fixed thermal and fixed magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
| 53 | Replacement of MCCB 100 Amps, 3Pole 415Volts, 16kA with fixed thermal and fixed magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
| 54 | Replacement of MCCB 125 Amps, 3Pole 415Volts, 16kA with fixed thermal and fixed magnetic setting and fixing in exisiting DB and making connection with cable by means of suitable size of thimbles complete all as specified and directed. |
| 55 | Replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with 25 Amps single pole MCB, complete all as specified & directed. |
| 56 | LED lights fitting 20W, Batten luminaire with Polycarbonate Housing with high quality opal finish diffuser. The luminaire should have a CRI > 80 and CCT of 6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 2000 nominal lumens and an System efficacy of at least 100 lumen/watt and maximum system wattage of 20 Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Havells Cat no LUMILINEPROBS20WLED865SPCWHIND equivalent in Signify/Wipro. |
| 57 | All as per ser item No 55 here in before but for 10 W LED batten fitting 2 feet long. |
| 58 | 15W bulk head LED luminaire, surface mounted, with and integrated electronic driver, IP 65 protection complete with all accessories internally prewired and including connecting up with suitable size flexible copper conductor cable from ceiling rose to connector of LED fitting and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 59 | 12 watt LED luminaire square shaped, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 60 | 18 watt LED luminaire square shaped, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 61 | 18 watt LED surface mounted round/square shaped rimless downlight panel having polycarbonate housing, high quality PC diffuser for glare free light with inbuilt driver and mounting arrangement suitable for surface/roof mounting including connecting up suitable size flexible copper conductor cable and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. |
| 62 | 9W LED fancy type wall/surface mounted decorative light fitting with brushed nickle finish fixture and opal glass decorative diffuser, B-22 type lamp holder and wall mounting arrangment including LED lamp and connecting up with suitable size flexible copper conductor and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 63 | 9W LED fancy type wall/surface mounted decorative light fitting with brushed nickle finish fixture and opal glass decorative diffuser, B-22 type lamp holder and wall mounting arrangment including LED lamp and connecting up with suitable size flexible copper conductor and making good disturbed surface of wall with cement mortar 1:4 and finishes to match exisiting surface, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender