Tender For Construction Of The Bauddhawadi Crematorium In Ward No. 04 Within The Limits Of Lanja Nagar Panchayat.
Tender Value
19.15 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
1 days left
EMD
31860
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of The Bauddhawadi Crematorium In Ward No. 04 Within The Limits Of Lanja Nagar Panchayat.
BOQ
| Sl. No. | Item Description |
| 1 | Item No:-1-Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling sand trees girth upto 300mm, removal of stumps of trees cut earlier anddisposal of unserviceable materials and stacking of service able material to be use dor auction ed upto a lead of 1000 metres including remov a land disposal of toporganic soilnot exceeding 150 mm in thickness. R.A.1 |
| 2 | Item No.2:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means R.A.2 |
| 3 | Item No.3 :- Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means R.A.3 |
| 4 | Item No.4:- Providing soling using 80mm size trap metal in layres of 15 cm each including filling voids with sand, ramming, watering etc. complete. R.A.4 |
| 5 | Item No.5:- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand.R.A.5 |
| 6 | Item No.6:- Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding einforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand R.A.6 |
| 7 | Item No:-7- Providing and laying Casting situ /Ready Mix cement concrete M- 20 of trap /granite /quartzite /gneiss metal for R.C.C.columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks,laying /pumping ,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete,(Excluding reinforcement and structural steel).with fully automatic microprocess or based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) R.A.7 |
| 8 | Item No.8 :-- Providing and laying Casting situ /Ready Mix cement concrete M- 20 of trap /granite /quartzite /gneiss metal for R.C.C.beams and lintels R.A.8 |
| 9 | Item No.9 :- Providing and fixing in position HCRM / CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. R.A.9 |
| 10 | Item No.10 :- Providing Laterite stone masonary in cement mortar 1:6 in Foundation and plinth incl.striking joint on the unexposed faces and watering comlpete.( Laterite stone six sides cut and thk.of mortar joints shall be 12mm max.) R.A.10 |
| 11 | Item No.11:-Providing laterite stone masonry in cement mortar 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. (Laterite stone six sides cut and thickness of mortar joints shall be 12mm max.) R.A.11 |
| 12 | Item No.12:-Providing internal cement plaster 20mmthick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.. R.A.12 |
| 13 | Item No.13:-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. R.A.13 |
| 14 | Item No.14:- Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughlycleaning oil, grease, dirt andother foreign matter and sand paperin gas required etc. complete. R.A.14 |
| 15 | Item No.15:- Providing and applying two coats of exterior acraylic emulsion paint confirming tocorresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.. R.A.15 |
| 16 | Item No.16:- Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.R.A.16 |
| 17 | Item No.17 :- Providing structural steel work in trusses,other similar trussed purlins and members with all bracing ,gusset plates etc.as per detailed designs and drawings or as directed including cutting, fabricating ,hoisting, erecting fixing in position, Making riveted /bolted/ welded connection and one coat of anti corrosive paint and over it 2coats of oil painting approved quality and shade etc. complete R.A.17 |
| 18 | Item.No.18 :- Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms / sq.mt .total on each side ) profiled sheets for roofing.The feed material is manufactured out of nominal 0.45mm Base Metal Thickness (BMT) (0.5mmTCT),Hi-strength steel with min.550 MPa yield strength,metallic hot dip coated with Aluminium-Zincalloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment) .The paint shall have a total coating thickness of nominal 35um,comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface.Profile sheet shall have nom.950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center.The end rib shall be designed for anti-capillary groove. and return leg.The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min.fastened with min.25 um Zinc-Tinalloy coated, Hexhead, self-drilling screw etc.complete. (weight of profile 4.52 kg/sqm ) R.A.18 |
| 19 | Item No.19:- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 lit R.A.19 |
| 20 | Item No.20:-Providing and fixing on walls/ ceiling/ floor Following Dai. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. R.A.20 |
| 21 | b) 20 mm |
| 22 | c) 25 mm |
| 23 | d) 40 mm |
| 24 | Item No.21 :- Providing and fixing 15 mm dia. screw down bib/stop tap of brass including necessary socket union nut complete. R.A.21 |
| 25 | Item No.22:-Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx 35mmx 3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge R.A.22 |
| 26 | royalty |
| 27 | testing |
| 28 | insurance Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender