Tender For Repair & Renovation Of Sub Collector Office At Sundargarh For 2026.27 Including electrical installation & Ph Works
Tender Value
80.01 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
11 days left
EMD
80012
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of Sub Collector Office At Sundargarh For 2026.27 Including electrical installation & Ph Works
BOQ
| Sl. No. | Item Description |
| 1 | Repair & Renovation of Sub Collector Office at Sundargarh for 2026.27 including EI & PH Works |
| 2 | Dismantling brick or stone masonary in cement mortar under 3.00m height including all costs complete. Stacking the useful materials for reuse and removing the debris 50 mtr lead. |
| 3 | Earth work in excavation of foundation in hard soil or gravelly soil including dressing and leveling the bed and disposal of the excavated materials with mechanical means within 5.00km. initial leads and lifts as per direction of E.I.C. |
| 4 | Supplying & filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete. |
| 5 | Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 6 | C.C. (1:2:4) with 12mm and down grade C.B. chips approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 7 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete. Column Base |
| 8 | Plinth |
| 9 | Column in Superstructure |
| 10 | Staircase |
| 11 | RCC Walls |
| 12 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. |
| 13 | Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in Superstructure including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. Ground Floor |
| 14 | 1st Floor |
| 15 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. Ground Floor |
| 16 | 1st Floor |
| 17 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the rough surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. Ground Floor |
| 18 | 1st Floor |
| 19 | Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50m lead |
| 20 | 4cm thick grading concrete (1:2:4) on roof slab with 12mm & down graded size hard crusher broken granite chips on old work including watering curing cost of all materials, water-proofing compounds, wire mesh T.& P. required for the works etc complete. |
| 21 | Finishing surface of walls with Cement based wall putty & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. |
| 22 | Priming 1 coat with wall primer water bond cement primer including all labour, materials, T&P etc. complete. |
| 23 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
| 24 | Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . |
| 25 | Priming 1 coat with primer red oxcide primer including all labour, materials, T&P etc. complete. |
| 26 | Painting 2 coats with any approved paint in iron works including sand papering, polishing surfaces, cost of paints, cost of all labour, T&P, etc complete in all floors as per direction of E.I.C. |
| 27 | Fixing Vitrified Industrial tiles in floors treads or steps and on 20mm thick bed of cement mortar 1:4 (1cement : 4 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including cost, carriage, royalty & taxes of all materials, cost of all labours T&P etc complete. |
| 28 | Providing, fitting, fixing of celling made out of Decco ceiling tile of any make with aluminum anodised T-Section No 3215 with 2'-0\\" centre to centre, L-Section no 1705 upto 15 micron on 4 walls tobe fixed by means of steel screws and pvc plug and the aluminium grid of 2'-0\\" x 2'-0\\" suspended from celling etc. complete. |
| 29 | Supplying of M.S. Door, Window with grills, Grills, collapsible gates made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour T&P, carriage of materials to site etc. complete. Door |
| 30 | Grills |
| 31 | Fixing granite tile (Above 0.40 Sqm) (20mm thick) in floors treads or steps and landing on 20mm thick bed of cement mortar 1:4 (1cement : 4sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost, carriage, royalty & taxes of all material, cost of all labour T&P etc. complete. |
| 32 | Supplying, fitting fixing fully glazzed alumimium framed fixed windows using 15 micron anodized aluminum section, 4124 as a shutter section frame with tappered clip of section 4125, aluminum angle, rubber breading, etc execluding cost of glass as directed by EIC. |
| 33 | Providing and fitting of glass pane (5 mm thick black Glass) for windows, door and ventilators including cost of all materials, labour T&P etc. complete. (Measurement to be taken as per actual) |
| 34 | Providing and fitting of zinc coated wire mesh) for windows, door and ventilators including cost of all materials, labour T&P etc. complete. (Measurement to be taken as per actual) |
| 35 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. (in all floor) |
| 36 | Supplying and fixing of Double skin wall paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c with 9mm thick BWR block ply and 4mm thick veneer finished with melamine polished on both the faces complete. |
| 37 | Providing & fixing of cup board consisting of BWR Ply wood (ISI) with decorative Laminated both sides including all types of fittings such as handle, lock chain, magnet channel, screws, bolt & nuts etc and jointing, finishing to a flush finish bonded with adhesive etc complete as per direction of the department |
| 38 | Providing and fixing ISI marked 30 mm thick flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete |
| 39 | Supplying , fitting and fixing of three track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 40 | Providing & Fixing of Kerela Style Roofing Sheet with hoisting joists & Trusses and placing in position and using red oxide primer and 2 coat enamel paint of approved shade with M-20 Cement Concrete of size 400mmx400mmx400mm for fixing the base, including all cost complete |
| 41 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP - 63:2018. |
| 42 | Disposal of the excavated materials from work site with mechanical means within 5.00km. initial leads as per direction of E.I.C. |
| 43 | EI WorksRecessed wiring to light/fan/Exhaust fan/call bell point with 1.5mm2 F.R. PVC S.C.Cu. wire & 1.5mm2 SC Cu. FRLS wire as running earth in 20 mm non-metalic PVC flexible pipe with 5A. Piano type Switch & C.rose mounted on MS.box with front bakelite cover including all accessories and connections. (Make wire of Finolex/ Anchor/Havells) Group-A |
| 44 | Group B |
| 45 | Group C |
| 46 | -do - 6A switch and socket |
| 47 | -do - 6A switch and socket on existing board |
| 48 | S/F of 16A switch and socket - modular type |
| 49 | -do- Submain wiring to following sizes of PVC S.C. FRLS Cu. Wire -do- (Make wire of Finolex/Anchor/Havells)a) 2x1.5mm2 + 1x1.5mm2 |
| 50 | b) 2x2.5mm2 + 1x1.5mm2 |
| 51 | c) 2x4mm2 + 1x2.5mm2 |
| 52 | S/F of Bakelite angle holder/batten holder of ISI marked including connection etc as required .(Make - Cona/ Anchor/ Greatwhite) |
| 53 | Supply and fixing of 48\\" Ceiling fan (Usha - striker/ Crompton - Super breeze Deco/ Havells - samraat/ Orient - pspo/ Or equivalent) |
| 54 | S/F of Electronics type Fan Regulator (Make - Cona/ Anchor/ HPL/ Graetwhite) |
| 55 | Supply and fixing of 8 Way DD DB BOX .(Make-Havells/ C&s/ L&T) |
| 56 | Supply and fixing of 20 Watt 4' LED Tubelights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips) |
| 57 | S/F of Exhaust fan 9\\" (Make Crompton/ Havells/ Usha/ Almonard) |
| 58 | S/F of 32 A, 240 V DP Main Switch (Make - Cona/ Anchor) |
| 59 | Supply and fixing of 25 Watt LED street light (Make-Havells/ Crompton/ wipro/ panasonic/ Philips) |
| 60 | Supply, installation, testing and commissioning of 5 kVA, 48V pure sine wave inverter system complete with inbuilt charger, DSP control, LCD display and protections against overload, short circuit and deep discharge, suitable for 230V, 50Hz AC supply, including supply of inverter of approved make such as Luminous India / Microtek / V-Guard, along with 4 Nos. 12V, 150Ah/180Ah/200Ah tall tubular batteries of approved make such as Exide Industries / Amaron / Luminous India connected in series to form 48V system, including supply and laying of 25 sq.mm copper battery interconnection cables with lugs, input and output wiring using FRLS copper conductor cables (minimum 2 × 6 sq.mm + 1 × 2.5 sq.mm earth) in PVC conduit/trunking, providing and fixing 63A DP/TPN changeover switch, inverter distribution board with MCBs, neutral link and earth bar for essential loads, MS battery stand, proper earthing with copper earth wire connected to existing earth system, and all required accessories such as lugs, glands, ferrules, saddles and hardware, complete installation, testing under load conditions and commissioning of the system in all respects ready for use. |
| 61 | Supply, installation, testing and commissioning of 1.5 Ton high wall split type air conditioner (5 Star rated as per BEE), suitable for 230V, 50Hz single phase AC supply, comprising of indoor and outdoor units with inverter compressor, copper condenser and evaporator coils, R32/R410A refrigerant, cordless remote control, digital display, auto restart, sleep mode and all standard features, of approved make such as Daikin /Hitachi/O-General, including supply and fixing of MS powder-coated outdoor unit stand, drilling of wall/core cutting, providing and laying of insulated copper refrigerant piping (up to 3 meters) with nitrile rubber insulation, PVC drain pipe, interconnecting power/control cable, earthing connection, mounting of indoor and outdoor units, testing for gas leakage, vacuuming, trial run and commissioning of the system complete in all respects as required for satisfactory operation. |
| 62 | PH Works Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C - PVC pipe SDR - 11(First Floor) |
| 63 | 25mm dia C - PVC pipe SDR - 11(First Floor) |
| 64 | 40mm dia C - PVC pipe SDR - 11 top Floor |
| 65 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 15mm dia CP angle stop cock(FLR-ACR-5053N) |
| 66 | 15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make) |
| 67 | 15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make) |
| 68 | 25mm dia brass full way valve (Shakti make) |
| 69 | 15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make) |
| 70 | 15mm CP Extension piece |
| 71 | 125mm CP grating |
| 72 | 15mm size C.P. flange |
| 73 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge .1000 liters capacity PVC water storage tank (roof top) |
| 74 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Supreme /Ashirvad) |
| 75 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 76 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 77 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 78 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 79 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 80 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 81 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 82 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 83 | 110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make) |
| 84 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 85 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 86 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge 10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 87 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge 550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) |
| 88 | Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal |
| 89 | Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate of size 600mmx350mm with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in charge |
| 90 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge Towel ring |
| 91 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge. 600mmx125mm plate glass shelf with CP/NP guard rails. |
| 92 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge. 600mmx450mm size B.E mirror (swivelled type) |
| 93 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge CP soap holder |
| 94 | Dismantling and removing old tiled flooring including removing the old base and stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge s Toilet :- 3x2.40x1.80 = |
| 95 | Supplying all materials, labour, T&P and providing ceramic tiles/granite tiles/chequered tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge Toilet :- 3x2.40x1.80 = |
| 96 | Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge 3 x 2.40x1.80x0.05= |
| 97 | Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.3 x 0.75 x 2.10 |
| 98 | Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge 3 x 5.02 |
| 99 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge 100mm dia P.V.C. pipe |
| 100 | Supplying all materials labour T&P and constructing 1.2m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender