Tender For General Civil & Interior Work
Tender Value
34.46 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
11 days left
EMD
50000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kozhikode → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For General Civil & Interior Work
BOQ
| Sl. No. | Item Description |
| 1 | Interior work |
| 2 | Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below |
| 4 | Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 5 | cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. |
| 8 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm |
| 9 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 10 | Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames. |
| 11 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) |
| 12 | PARTITION PLY WITH MICA TWO SIDES FINISH- Providing & fixing cabin Partition upto ceiling height, with support to concrete slabs/roofings. Consisting of 19mm thick marine grade IS 710 BWP plywood for framework, fixed to floor, walls and ceiling at a spacing of 45cm centre to centre horizontally and vertically, using metal/wooden support dash fastner, anchor fasteners or metal screws with nylon plugs , studs etc. Fix 9mm thick IS 710 BWP plywood on both sides of framewok. Both surface to be finished with 1mm thick mica of approved make and color at exposed surfaces. 12 mm thick toughened glazing as per the architect drawing, including providing openings for windows, glass, doors, electrical wiring etc complete as per design |
| 13 | TOUGHENED GLASS DOOR- Providing and fixing frameless single shutter toughened glass door as per design of size 90 cm wide and 210 cm height/as per drawing. Thickness 12 mm. Fittings to be provided stainless steel make floor spring of 90 kg weight capacity, patches for door top and bottom, making holes. Stainless-steel double-sided door handle of 200 mm length. Glass to glass double-sided stainless-steel door lock to fixed. Complete as per design and size and direction of engineer in-charge |
| 14 | Providing single shutter partially glazed/opaque flush door as per design of size 210 cm height/as per drawing. Thickness 30 mm. 30mm thick door ply to be fixed. Exposed Surface to be finished with 1 mm thick decorative laminate of approved make and colour. Hinges, latches, mortice lock, auto closer to be provided as per design and size and direction of engineer in-charge. NC putty to be neatly applied on exposed surfaces. |
| 15 | WALL PANELLING- Providing and fixing wall paneling in any design upto ceiling height consisting of 19mm thick marine grade IS 710 BWP plywood framework sections, fixed to floor, walls and ceiling at the spacing of 45cm centre to centre horizontally and vertically using necessary wooden/metal support, dash fastener, anchor fastener or metal screws with nylon plugs and studs. 9mm thick marine grade IS 710 BWP plywood to be fixed on exposed surface. Surface to be finished with 1 mm thick decorative laminate of approved make and colour. Including providing openings for glass, window, doors, designs, groves etc. complete as per design. Including all cost to finish work at site |
| 16 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS |
| 17 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 18 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 19 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work. |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 21 | Providing customized executive table with side table for computer as per design, 75 cm wide, 75 cm height, using 19mm thick marine grade IS 710 BWP plywood. 0.7mm thick white/off white laminate to be pasted on all inner sides. Exposed Surface to be finished with 1 mm thick decorative laminate of approved make and colour. Main table to have a drawer with sliding channels, one shelf. Keyboard tray with sliding channel and electrical conduits, CPU cupboards, wire manager to be provided. Multi lock and handles to be provided for all drawer and shelves as per design and size and direction of engineer in-charge. NC putty to be applied neatly on all exposed edges, if any. Including all cost to finish work at site |
| 22 | Providing and fixing storage unit/file rack of 42 cm depth, at 60 cm height and 60cm width, using 19mm thick marine grade IS 710 BWP plywood frames and racks. Inside area to have 0.7mm thick white/off white laminate. Back side to have 6 mm thick multiwood. Doors to be made of 19mm thick marine plywood/ block board. All exposed portion to be finished with 1 mm thick decorative laminate of approved make and colour. Multilocks, auto hinges to be fixed. etc as per design and size and direction of engineer in charge. NC putty to be applied neatly on all exposed edges, if any. surface area to be measured. Including all cost to finish work at site. |
| 23 | Supplying and fixing of 10 mm thick milky white top on top of tables. All the edges have to be neatly moulded as per the the length of the table. Edges to be moulded tidily as per architects satisfaction. Rate to be inclusive of cutting charges, molding charges, tapering charges,wastage, transportation, labour etc. Only visible area to be measured |
| 24 | Providing and fixing premium quality wall paper (Asian) on the wall surface. Rate to be inclusive of all material, labor, adhesive cost etc. Wallpaper to be selected by architect. |
| 25 | Providing and fixing premium quality zebra type roller blinds for the windows. Rate to be inclusive of all material, labor, transportation cost etc. |
| 26 | Providing and erecting in position acrylic signage board- direction indication to every facility, including all cost to finish work at site |
| 27 | Providing and erecting in position 3mm acrylic name board, including all sticker works. Rate to be inclusive of all material, labour, scaffolding charges, etc |
| 28 | Providing and fixing premium quality sticker for the glass surfaces. Rate to be inclusive of all material, labor, adhesive cost etc. Sticker design to be selected by architect. |
| 29 | Providing cleaning of entire site interiors and exterior during hand over with deep cleaning of furnitures and floors and disposal of waste at location arranged by bank within 500mtrs distance |
| 30 | ACRYLIC LED LETTERING WORK ON WALL Providing and erecting in position name and details as per the details in acrylic and fiber led block letters on wall, upto 12 mtrs height. Including all sticker works. (Acrylic led letters with 10” height and 2” thickness, all letter in English and Malayalam). Rate to be inclusive of all material, labour, scaffolding charges, etc. Approx 60 letters in a set |
| 31 | Air Conditioning work |
| 32 | 1 TON SPLIT AC Providing and supplying BRANDED DAIKIN/BLUESTAR/VOLTAS 1 TON inverter type split AC at the site. Rate, transportation charge, loading charge all inclusive |
| 33 | 1.5 TON SPLIT AC Providing and supplying BRANDED DAIKIN/BLUESTAR/VOLTAS 1.5 TON inverter type split AC at the site. Rate, transportation charge, loading charge all inclusive |
| 34 | 2 TON SPLIT AC Providing and supplying BRANDED DAIKIN/BLUESTAR 2 TON inverter type split AC at the site. Rate, transportation charge, loading charge all inclusive |
| 35 | STABILISER FOR AIR CONDITIONERS Providing and fiing 2KVA V guard make stabiliser for air conditioners. Transportation, fixing charges all inclusive. |
| 36 | ADDITIONAL DRAINAGE PIPING FOR AIR CONDITIONERS Supplying and fixing additional drainage piping for both split and cassette AC as per the site conditions |
| 37 | ADDITIONAL COPPER PIPING FOR AIR CONDITIONERS Supplying and fixing additional copper piping for both split and cassette AC as per the site conditions |
| 38 | Supplying PVC self adhesive white tape for air conditioner copper pipe wrapping, including material, labour charges etc complete |
| 39 | Supplying and fixing communication cable for air conditioners as per the site conditions, including transportation, fixing charge all inclusive. |
| 40 | Air conditioner stand Providing and fixing wall mounted steel stand for ODU unit. transportation, fixing charge all inclusive. |
| 41 | AIR CONDITIONING INSTALLATION WORK (for Split AC) Providing Air conditioning installation work. Transportation, fixing charges all inclusive. |
| 42 | Electrification work |
| 43 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group A |
| 44 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required Group B |
| 45 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable in surface / recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLSPVC insulated copper conductor single core cable etc as required.Group C |
| 46 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 47 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 48 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq.mm earth wire. |
| 49 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 50 | Supplying and fixing following piano type switch / socket on the existing switch box/ cover including connections etc. as required.Telephone socket outlet |
| 51 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outle |
| 52 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet. |
| 53 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) |
| 54 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 55 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) |
| 56 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) |
| 57 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.12 Module (200mmX150mm) |
| 58 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. |
| 59 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required100 Amp, 16 KA, TPMCCB |
| 60 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 61 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 62 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 63 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps |
| 64 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 65 | Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator |
| 66 | Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin socket |
| 67 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) |
| 68 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall ,making good the damages, colour washing etc. as required6 way (8 + 18) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) |
| 69 | Supply and laying of one number additional PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground in the same trench in one tier horizontal formation including widening the trench by 20 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil)4 core 16 sq mm |
| 70 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG |
| 71 | Supply and fixing of SQUARE/ROUND -15 W LED lights on celling where ever designed by electrical engineers with copper coloured wire with green earth wire so as to share the connected load and equal distribution of lights bands for standard candle power and keeping distance. including cost and conveyance of all materials labour charge etc. complete |
| 72 | Supply and installing of 400mm sweep wall fan neatly and safely or fixing with anchor fastener and makinggood the all after fitting etc complete. including cost and conveyance of all materials labour charges etc. complete |
| 73 | Supply, Installation, Testing and commissioning of 6\\"exhaust fan, including cost and conveyance of all materials labour charge etc . Complete |
| 74 | Preparing as-built drawing and shop drawing and charges for taking approval and getting electrical connection from CEI and KSEB (Testing fees -As per actual on submitting original receipt) |
| 75 | Networking |
| 76 | Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required 1 run of Cable |
| 77 | Supply and Fixing of 110mm PVC wall trunking through the work stations |
| 78 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm |
| 79 | Supply,Installation,Testing and Commissioning of 16-Port Gigabit L2 Smart Managed POE (120W) switch with 2 SFP Slots Switch -Ports(RJ45) . With 2 year warranty including configurations , load balancing etc or any other configurations as instructed at the time of installation. Preferred Make: D-link/ TP Link/Netgear |
| 80 | Supply and fixing of 19’’ 9 U Wall mount rack with covered wire manager, cooling fan, AC distribution box , hardware kits including all other accessories. Make. Rittal/Netrack/DLINK |
| 81 | Supply and Fixing Cat 6 UTP Patch Cord, 2 Mtr. Molex/Comscope/DLINK |
| 82 | Supply and Fixing Cat 6 UTP Patch Cord, 1 Mtr Make : Molex/Comscope/Dlink |
| 83 | Supply and fixing of 2 module PVC box (for single and dual outlets) Make : Legrand / Crabtree / Anchor ( Any ISI approved make )/DLINK |
| 84 | Supply, installation, testing and commissioning of single RJ45 outlets, complete with cover plate in existing back box including IDC crimping. (Data & Telephone) Make : Opterna / Dlink / Molex/comscope |
| 85 | Supply and Fixing of 24 port cat6 UTP patch panel, fully loaded including termination Make : Opterna / Dlink / Molex/comscope |
| 86 | Plumbing Work |
| 87 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge |
| 88 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:Stainless Steel AISI - 304 (18/8) Wash basin 530 x 345 mm with single 15mm C.P. brass pillar tap |
| 89 | Supply fixing at site in position CP Health Faucet with holder, 1 mtr long flexible tube, with wall flange all complete including cutting and making good the walls wherever required. |
| 90 | Supply and fixing Angle Valve set complete including cutting and making good the wall etc. |
| 91 | Providing and fixing CP brass bib cock of approved quality. 15 mm nominal bore |
| 92 | Supply Fixing at site in position Soap Holder recessed or exposed of approved make / quality with screws and rawl plug embeded in the walls complete including cutting and making good the walls whenever required |
| 93 | Supply Installing, testing and commissioning at site in position Wall mirror of approved make /quality with fixing screws |
| 94 | Supply Fixing at site in position CP brass / SS Towel Rail of approved make quality with stainless steel screws and rawl plug all complete. |
| 95 | Supply and fixing of SS 304 grade Grating of suitable size including material, labour, etc complete |
| 96 | Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 |
| 97 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend |
| 98 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee |
| 99 | Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2 |
| 100 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia 45 degree Elbow |
| 101 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend |
| 102 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee |
| 103 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2 |
| 104 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2 |
| 105 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2 |
| 106 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore |
| 107 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee |
| 108 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Socket /coupling |
| 109 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow |
| 110 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x75 mm dia Reducer |
| 111 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender