Tender for Tender for Repair And Painting Work Of The Existing Secretary Office And Meeting Hall At Nmy Meerut
Tender Value
19.85 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
15 days left
EMD
1.99 Lakhs
Bank guarantee accepted
Document Fee
3536
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting Work Of The Existing Secretary Office And Meeting Hall At Nmy Meerut
BOQ
| Sl. No. | Item Description |
| 1 | Scraping+B13:B15 old white or colour wash including disposal of refuse as directed by the Enginner in charge with in a 60mt SI NO 708 |
| 2 | Dismentling of existing plaster including disposal of refuse as directed by E / I .(S.I.No-706) |
| 3 | 12 mm thick plaster with cement and appro-ved coarse sand mortar in 1:4 over brick 1 cm including supply of all materials, labour T & P etc. required for proper completion of the work. SI NO 584A |
| 4 | 12 mm thick plaster with cement and appro- -ved coarse sand mortar in 1:4 over brick 1 cm including supply of all materials, labour T & P etc. required for proper completion of the work. SI NO 587 for ceiling plaster (584A+587) (160+20) |
| 5 | Providing wall putty with approved quality material of beager/ J.K. birla or similar make 2 coat SI NO 662 New item |
| 6 | Providing wall putty on old surface with approved quality material of beager/ J.K. birla or similar make 2 coat SI NO 662 New Item |
| 7 | Finishing wall with two coat of weather coat of approved quality on superviously surface with this paint give an even shade including supply of all materials labour T&P etc si. New Item page no 23 SI No 662 New Item |
| 8 | Distempering ( Two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even cement primer of approved brand and manufacture such as berger, J&N shalimar,asian paint after thoroughtly brushing the surface free from mortar dropping and other foreign matter and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all mateirals lobour tools & plants etc. required for proper completion of the work. si no 649+650 |
| 9 | Supply and fixing Galvanized Mosquitos proof heavy quality S.S Wire gauge heavy quality over windows and including supply of teak wood batten 8 cm x 1cm. (3''x3/8'') flat iron 25 mm x 4mm and including supply of necessary screws all materials, labour, Tools & Plants etc. required for proper completion of the work. SI No 455 |
| 10 | Supply and fixing 32 mm. thick Commercial flush door shutters conforming of I.S. 2202 Part-1(1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles and springs (excluding cost of fitting) SI No. 470A |
| 11 | Approximate cost of ISI marked oxidized iron fitting with screws for door & windows etc. (for estimating purpose only) SI No 473 |
| 12 | Painting or varnishing work in small areas or new wood work withone coat (upto one square metre) ready mixed priming paint and 2 coat of superior quality ready mixed paint or varnish including supply of all materials. Labour tools & plants etc required for proper completion of the work paint to be used should confirm the ISI no 103-1950 S.I.No. 641+642 |
| 13 | Painting or varnishing Two Coat on Previously Painted old wooden or iron work including supply of all materials. Labour tools & plants etc required for proper completion of the work paint to be used should confirm the S.I.No. 642+643 |
| 14 | M-150 brick work in 1:4 cement and c. sand mortar for one brick thick wall in superstructure including supply of all materials labour T&P etc. required for proper completion of the work si no 305A + 310 +310a |
| 15 | Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White glazed earthen ware (Indian type)/Neycer W.C Pn 580 mm Dia.SI No 21.12 |
| 16 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI:12701 marked (Sintex or equivalent) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank complete as per direction of Engineer-in-charge. SI No 21.11 |
| 17 | Providing and fixing wash basin with C.I brackets] 15 mm CP brass pillar taps, 32 mm C.P brass waste of standard pattern, Including painting of fitting and brackets, cutting and making good the walls wherever require. White Viterous China was basin size 630x450 mm with a pair of 15 mm C.P brass pillar taps Si No 21.16 |
| 18 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. SI No 21.25 |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stablity for hot & cold water supply, Including all CPVC plain & brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fitting, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed Work, including cutting chases and making good the wall etc. SI No 21.02 15 mm dia nominal outer dia pipes Si No 21.02 A |
| 20 | Si No 21.02 B 20 mm dia Nominal outer dia pipes |
| 21 | Si No 21.02 D 32 mm dia Nominal outer dia pipes |
| 22 | Providing and fixing C.P. Brass bib cock of approved quality confirming to Is 8931 SI No 21.07 |
| 23 | Providing and fixing brass stop bib cock ISI marked approved quality as per direction of Engineer-in-charge. SI 21.04 B 20 mm nominal bore SI No 21.05 (15 mm nominal bore SI No 21.05 A |
| 24 | SI No 21.05 B 20 mm nominal bore |
| 25 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, Including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. SI 19.02 SI No 730a 100 mm diameter SI No. 730(a) |
| 26 | Renewing panes of glass in door, window & ventilators or fixing in the new work with 3 mm, thick glasspanes fixed with brads & putty including supply of all materials, labour, tools & Plants, required for proper completion of work. SI No 806 |
| 27 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet) SI No. 697 |
| 28 | Providing and laying \\"brick coba\\" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement ad coarse sand mixed with water proffing compund spreading cement slurry mixed with aerelic cement concrete water proffing compund filled gaps of coba & top of coba mortar mixed with water proofing compund in 1:4 cenent and coarse sand mortar finished smooth & top mashed false squarte 30 cm X cm and side wall parapet shall be mono tythic plaster wall upto 30 cm higher and juction and corner shall be rounded by vrick ballast cement and coarse sand masonary coba with top finshed plaster mixed with acetic water proofing compund @ 2% by weight & including S/o all material, labour, T&P etc. complete for proper completion of work. (New Item) |
| 29 | Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the engineer-incharge within a distance of 60 metre 200 feet 694 (SI) |
| 30 | Concrete 1:6:12 cement coarse sand and stone ballast in flooring include in supply of all material, labour T&P require of work as per direction of E/C SI No. |
| 31 | Cement concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour , tools & piants etc. required for proper completion of the work. 279 (a) |
| 32 | Supply and fixing 6mm (1/4\\") china white glazed tiles in flooring or in skirting or dado laid with 1:3 Cement and approved coarse sand mortar finished with white cement slurry, jointing and polishing complete, including supply of all materials, labour and tools and plants. |
| 33 | Supplying and fixing rolling SHUTTERS of approved make made 80x125mm (3\\"x5\\") cold rolled M.S. lath inter locked throughout their entire length and joined together at the end by end locks and mounted on specially designed pipe shaft with brackets, side quides and arrangements for inside and outside locking with push and pull operation compete but excluding the cost of top cover and springs. 520 |
| 34 | provding and fixing 27.5cm long wire spring grade 2 for rolling shutters 521 |
| 35 | provding and fixing top cover for rolling shutters 2.50 meter wide. 522 |
| 36 | providing and fixing ball bearing for rolling shutters. 523 |
| 37 | Excavation work in foundation |
| 38 | M-150 brick work in 1:4 cement and c sand mortar for one brick thick wall in substructure including supply of all materials labour T&P etc. required for proper completion of the work si No. 305A+310+310a |
| 39 | RCC work with cement approved coarse sand and 2.0 cm gauge approved stone grit in proportion 1:2:4 in lighter beam excluding supply of reinforcement but including its fixing and binding the same with 24 BWGGI binding wire including necessary centering and shuttering and also including supply of all materials, labour and T&P etc. required for proper completion of the work SI No. 285 |
| 40 | Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work wrought to required shape as necessary including bending for proper completion of the work and cincluding supply of steel its wastage bends, hooks and authorised over lapping shall be measured TMT Fe 500 DSR 23 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender