Tender For Renovation And Upgradation Work Of 10Th & 11Th Floor Of Authority Office Building New Building
Tender Value
5.46 Crore
Estimated cost
Bid Submission
15 Jul 2026
6 days left
EMD
16.38 Lakhs
Bank guarantee accepted
Document Fee
4366
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Upgradation Work Of 10Th & 11Th Floor Of Authority Office Building New Building
BOQ
| Sl. No. | Item Description |
| 1 | Of area 3 sq. metres and belowDSR 2023- 15.12.1 |
| 2 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.DSR 2023- 15.57 |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortarDSR 2023- 15.7.4 |
| 4 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.DSR 2023- 15.3 |
| 5 | Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer in-charge.DSR 2023- 15.5 |
| 6 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mmDSR 2023- 15.23.1 |
| 7 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR 2023- 13.91 |
| 8 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR 2023- 15.56 |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.DSR 2023- 15.60 |
| 10 | Cement mortar 1:3 (1 cement :3 coarse sand)DSR 2023- 6.13.1 |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 2023- 6.4.1 |
| 12 | 1:4 (1 cement: 4 coarse sand)DSR 2023- 13.4.1 |
| 13 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).DSR 2023- 4.1.8 |
| 14 | 25 mm nominal outer dia .Pipes.DSR 2023- 18.8.3 |
| 15 | 32 mm nominal outer dia .Pipes.DSR 2023- 18.8.4 |
| 16 | 40 mm nominal outer dia. Pipes.DSR 2023- 18.7.5 |
| 17 | 510x1040 mm bowl depth 250 mm.DSR 2023- 17.10.1.1 |
| 18 | Providing and fixing Sink Mixer as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent- Sink Mixer |
| 19 | Providing & Placing of Looking Mirror pasted on wall with the help of silicon having edges beveled, all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge. Customized- Looking mirror |
| 20 | Providing & Fixing of Concealed Stop Cock With Trims as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent MR- Concealed Stop Cock |
| 21 | Providing and fixing of Long Braided Hos Pipe as per the approved design all complete as per drawing, specification and direction of engineer incharge.-1164 |
| 22 | Providing & Fixing of Wall hung Closet with Soft Close Seat Cover Fixed with Jumbo Bolts as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-19165 |
| 23 | Providing & fixing of Urinal With Sensor as per the approved design all complete as per drawing, specification and direction of engineer incharge.- Urinal With Sensor |
| 24 | Providing and fixing Urinal Partition Make-Kerovit, as per the approved design all complete as per drawing, specification and direction of engineer incharge.-2783 |
| 25 | Providing & Fixing of Concealed Cistern With Push Plate as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent MR- Concealed Cistern With Push Plate |
| 26 | Providing and fixing of Under Counter Basin as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent MR- Under Counter Basin |
| 27 | Providing and fixing of Half/Full Pedestal Basin as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-9500 |
| 28 | Providing & fixing of Single Lever Basin Mixer as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Jaquar/American Standard/Kerovit Eqivalent-9930 |
| 29 | Providing and fixing 2 Way Bib Tap as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent MR- 2 Way Bib Tap |
| 30 | Providing & fixing Health Faucet as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-2151 |
| 31 | Providing and fixing of Angle Cock as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-2214 |
| 32 | Providing and fixing of Bottle Trap as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent- Bottle Trap-2 |
| 33 | Providing and fixing of Toilet Paper Holder as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-2025 |
| 34 | Providing and fixing of Towel Ring as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-1392 |
| 35 | Providing and fixing of Soap Dispenser as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-4048 |
| 36 | Providing and fixing of Waste Coupling as per the approved design all complete as per drawing, specification and direction of engineer incharge. Make-Kerovit/Equivalent-886 |
| 37 | Providing and fixing of Long Braided Hos Pipe as per the approved design all complete as per drawing, specification and direction of engineer incharge.-1164 (PSR)- IGP-SM-21 |
| 38 | Providing and fixing of 110mm dia pipe 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-508 |
| 39 | Providing and fixing of 110mm dia Elbow 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-118 |
| 40 | Providing and fixing of 110mm dia 45 Degree Elbow, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-143 |
| 41 | Providing and fixing of 110mm dia Socket, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-127 |
| 42 | Providing and fixing of 110mm dia Tee, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-266 |
| 43 | Providing and fixing of 110x110mm dia Nahani Trap, 6kg pressure of Supreme make or equivalent, including supply of all materials, labour and T&P etc.-207 |
| 44 | Providing and applying DRYTHANE 400 HE with Surfacer water proof coating 0.50 mm including DRYTHANE Standard 2.50 mm thick including surface cleaning etc all comp. all area as per direction of engineer in charge. (Sanction Rate for Kanpur Nagar Nigam)-3550 |
| 45 | Taking out Sunken Portion Cinder & then Refilling after Water Proofing as per the approved design all complete as per drawing, specification and direction of engineer in charge MR-2550 |
| 46 | 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)DSR 2023- 12.45.1 |
| 47 | Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles With Armstrong 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 63%. The tile shall be laid on Armstrong Suprafine 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 8.8 Kgs/M2 & pull out strength of 100Kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system of Armstrong make. INSTALLATION: To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum centre. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centres. ARMSTRONG SUSPENSION SYSTEM - Armstrong make Anchor Fastener, Hanger Wire 2.5mm dia, Hook Clip with J Wire assembly. Approved Makes - Armstrong, Shera, Nitco.-2350 |
| 48 | GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation.DSR 2023- 12.54.2 |
| 49 | Providing & Fixing of Suspended Gyptone Sixto 63 Ceiling includes 20x28x30x0.5mm Gypserra™ Perimeter Channel (Material-GI(IS513), YS-260Mpa, Finish-Galvanised 150GSM(15277)) is fixed along the perimeter of existingwall with the help of HILTI HPS-1 (6x40) impact anchor at 600mm centres. 25x10x0.5mm Gypserra Ceiling Angle (Material-GI(IS513).YS-260Mpa, Finish-Galvanised 150GSM(15277)) is suspended by fixing itto 27x37x25x1.6mm Gyproc soffit cleat (GI(IS513)YS-260Mpa, Finish-Galvanised 120GSM (15277)). SoffitCleat and Gyproc® Rawl Plug-08x45mm (Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull outload-6.8kN for M30 concrete grade) creating 1200mm x 1200mm grid. 15x45x15x0.9mmGypserra Intermediate channel (Material-GI(IS513), YS-260Mpa, Finish-Galvanised 150GSM(15277)) isfixed to the Gypserra Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement (Material-As perEN 10083 Finish - Zinc Plating) or with 2 Nos of Ø4.2x13 Gyproc metal to metal screw {Material-Carbonsteel EN-ISO 7049/50 Finish-Zinc Coating Thickness-4.14micron.). 80x26x0.5mm Gypserra™ CeilingSection (Material-GI(IS513), YS-260Mpa,Finish-Galvanised 150GSM(IS277)) is then fixed to the Gypserra™ Intermediate Channel (Material-GI(IS513), YS-260Mpa, Finish-Galvanised-34 |
| 50 | Providing and fixing of Engineered Wood flooring 15MM Thick range Solitary collection of Use 23/32 (Heavy Domestic/Domestic) with a Surface Abrasion Resistance of class AC3 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density > 850 Kg/M3) of plank having Uni fit locking arrangement (lock strength > 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge)Make-Mikasa/Luxe/Armstrong. all complete as per drawing, specification and direction as approved by the Architect/ Engineer -in-Charge. Make-Armstrong,Mikasa,Luxe Equivalent.10123 (PSR)- IGP-SM-30 |
| 51 | Providing & Fixing of Forbo Flotex color/linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per Sqm , Fire Test EN-13501, Appearence Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing ,anti allergic cetrtified by British allergy foundation, anti static, stain resistant, thickness 4.3 mm and approximate weight of 4.5 k.g./sqm of roll form with acoustic sound impact 17dB. Flotex to be installed over cement based smooth level hard flooring( Made in United Kingdom). The carpet should be laid complete including SS edge profile at door.7150 (PSR)- IGP-SM-29 |
| 52 | Providing and laying of Double Charged floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x1200mm-2150 |
| 53 | Size of Tile 600x600 mmDSR 2023- 11.41.2 |
| 54 | Size of Tile 600x600 mmDSR 2023- 11.48.2 |
| 55 | Area of slab over 0.50 sqmDSR 2023- 8.2.2.2 |
| 56 | Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. completeDSR 2023- 8.5 |
| 57 | Providing & Making & Fixing of Commercial Wall Panneling made with Aluminium Section of 2\\"x1\\" @ 2'CC frame work cladded with 12MM Ply complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge. M.R- Commercial Wall Panneling |
| 58 | Providing & Making & Fixing of Commercial Wall Partition made with Aluminium Section of 2\\"x1\\" @ 2'CC frame work cladded with 9MM Ply on Both Side complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-6565 |
| 59 | Providing & Making & Fixing of Wall Panneling made with 1MM Laminate & 5.5MM MDF on Existing Surface complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-2419 |
| 60 | Providing & Making & Fixing of Wall Panneling made with 4MM Veneer & Teak Wood Mouldings as per design on Existing Surface & then Finished with Water Base PU Polish, as per the approved design all complete as per drawing, specification and direction as approved by Engineer-in-Charge.-40 |
| 61 | Providing & Making & Fixing of Wall Panneling made with Coloured Lacquered Glass on Existing Surface complete with Melamine Polishe. as per the approved design all complete as per drawing, specification and direction as approved by Engineer-in-Charge.-42 |
| 62 | Providing and Fixing Channeled Woodworks perforated panels of width 128mm, thickness of 16mm and length 2440 mm or as required by the Architect/ approving engineer, made of a high density particle board substrate with a laminated facing as per the approved shade & finish and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 14mm of visible panel / 4mm width and 28mm visible panel) each. The panels shall provide a minimum sag resistance of RH90 and a fire rating class of 1 as per Part 7 of BS 476. The edges of the panels shall be “tongue-and-grooved” to receive special clips for installation. The back of the perforated panel shall have sound absorbing non-woven acoustical fleece. The panels shall be mounted on special aluminium splines using clips. as per the approved design as approved by the Architect/ Engineer -in-Charge. MR-7200 |
| 63 | Providing and supplying Acoustical Wall Paneling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire -resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size as required providing a minimum sound absorption level to be affixed to wall using Wall panel impalers and construction adhesives as per the instructions laid down by the installer as per the approved design as approved by the Architect/ Engineer -in-Charge. MR-9000 |
| 64 | Providing & Making & Fixing of Double Skin 19MM Door (ISI Marked) complete with Floor Spring, Top & Bottom Pivot, Lock Body & Handle all complete with painted or polishe. as per the approved design all complete as per drawing, specification and direction of engineer incharge. (PSR)- IGP-SM-36 |
| 65 | Providing & fixing of 32MM Flush Door complete with all Fittings Like Hinges, Mortis lock, Door closer, Tower Bolt etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-16778 |
| 66 | Providing & Fixing of Plotter Cutted Designer Film of approved shade as per drawing & specification as approved by Engineer -in-Charge. M.R- Plotter Cutted Designer |
| 67 | Providing & Fixing of Plotter Cutted Designer Coloured Vinyl of approved shade as per drawing & specification as approved by Engineer -in-Charge.-4050 |
| 68 | Supply & Fixing of windows made from multi chambered UPVC profiles of minimum 60/108 mm thickness of (Wintech make or equivalent) in natural from stailized for heat, light, impact & UV radiation. The UPVC profiles should be reinforced with galzvanized steel profiles of designed thickness.Float glass of approved colour in 5 mm shall be fixed with heveled beads. All openable / sliding sashes shall be having grey/black colored weather seal fitted in continuous lenghts made from bubble PTV Rubber & side Hung with 90L openin friction syats of rust proof stainless steel with provision of multipoint lockng system (casement only) made from Espag rods (coated steel) all handle shall be made from die Cast zinc alloy in white finish only as per desigh, drawings, specification & as approved by Architect/Engineer Incharge.-10500 |
| 69 | Providing & Fixing of Zebra Blinds of approved shade as per drawing & specification as approved by Engineer-in-Charge.-47 |
| 70 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 2023- 13.80 |
| 71 | Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqmDSR 2023- 13.48.1 |
| 72 | Providing & Fixxing of WPC Chaukat as per the approved design all complete as per drawing, specification and direction of engineer incharge-1500 |
| 73 | Providing & Fixing of Rectangular Shape Polmer Planter of Size (375Wx375Dx400HT\\") With Thermocol Packing & Double Layer of Pabbles With Artificial 36 Plants of approved shade as per drawing & specification as approved by Engineer-in-Charge. MR-61 |
| 74 | Providing & Fixing of Round Shape Polmer Planter of Size (375DIA X 375HT\\") With Thermocol Packing & Double Layer of Pabbles With Artificial 36\\"Plants of approved shade as per drawing & specification as approved by Engineer-in-Charge. MR-62 |
| 75 | Providing & Fixing of Photo Frames of Different Sizes of Picture in Coloured/ Black & White Canvas Prints with wooden frame borders complete as per desigh, drawings, specification & as approved by Architect/Engineer Incharge.-36000 |
| 76 | Providing, fabricating & placing single leaf single swing aluminium stile door with 12mm thick toughened glass & stile size of 40mm x 90mm. The door frame of size 70 x 50mm shall be formed with heavy duty aluminium door, fixed to dry wall partition. Rate to include providing & fixing of Geze make standard stainless steel brush finished hardwares Hinges: flush door hinge -Geze-. Finis: Std finish Handle & lock: lever handle & Mortise lock set with both side key cylinder- Geze, Door Closer: Exposed door closer TS 3000V - Asymatric Rack and Pinion Door Closer with hold-open slide arm Closing force: 1-4 (adjustable) Tested according to EN 1154 for door width upto: 1100mm Door stopper: Half moon door stop Finish of profile- Black finish System - Micra I door Make - Liko-s/Equivalent-42254 |
| 77 | Providing & Fixing of full height Single glazed partition using 10mm thick toughened Glass fixed with proprietary anodized aluminium sections of size 26x30mm (H) on top, bottom, horizontal & vertical. Rate to include required accessories as per the manufacturer's specifications and shall be inclusive of all accessories like Gaskets. Glass to glass joints to be sealed with Double sided 2mm Thick transparent tape. The glasses to be butt jointed with 2 to 3mm edge chamfer & edge polishing all around.Achieving value of 31 dB. ( Rate is not included for door frames) Finish - Black Anodised, Partition Height - 2400mm, System - Micra I, Glass - 10mm Toughened Glas, Make - Liko-s-6500 |
| 78 | Group ADSR 2022 E-M- 1.10.1 |
| 79 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.DSR 2022 E-M- 1.31 |
| 80 | Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.DSR 2022 E-M- 1.32 |
| 81 | 2X1.5 sq. mm + 1 X 1.5 sq. mm earth wireDSR 2022 E-M- 1.14.1 |
| 82 | 2 X2.5 sq. mm + 1X2.5 sq. mm earth wireDSR 2022 E-M- 1.14.2 |
| 83 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wireDSR 2022 E-M- 1.14.3 |
| 84 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.DSR 2022 E-M- 1.19 |
| 85 | 20 mmDSR 2022 E-M- 1.21.1 |
| 86 | 25 mmDSR 2022 E-M- 1.21.2 |
| 87 | 32 mmDSR 2022 E-M- 1.21.3 |
| 88 | Supplying & fixing of TV Antenna socket on Modular Plate & G.I Box including connections-87 |
| 89 | 1 or 2 ModuleDSR 2022 E-M- 1.28.1 |
| 90 | 3 ModuleDSR 2022 E-M- 1.28.2 |
| 91 | 4 ModuleDSR 2022 E-M- 1.28.3 |
| 92 | 6 ModuleDSR 2022 E-M- 1.28.4 |
| 93 | 8 ModuleDSR 2022 E-M- 1.28.5 |
| 94 | 12 ModuleDSR 2022 E-M- 1.28.6 |
| 95 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.DSR 2022 E-M- 1.26 |
| 96 | Single poleDSR 2022 E-M- 2.10.1 |
| 97 | S&F of 125 Amp 4 pole MCCB (25 KA) Thermal Magnetic release-10615 |
| 98 | S & F surface/Flush mounting 12ways V TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge. CAT-A-13640 |
| 99 | Supply and fixing of recess mounting round 15 TO 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT-AAA-1870 |
| 100 | Supply and fixing of 36 Watt to 46 Watt above 3300 leumin indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect. CAT-AAA S.I 1406- S.I 1406 |
| 101 | Supply and fixing of 150mm Fresh Air Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent-2107 |
| 102 | Supply and fixing of 400mm Wall Fan all complete as per drawing and specification and direction of engineer incharge. Make-Crompton/Bajaj/Havels Equivalent-3495 |
| 103 | Supply & Fixing of LED Profile Light all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent-1151 |
| 104 | Supply & Fixing of LED Profile Light Driver all complete as per drawing and specification and direction of engineer incharge. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent-3795 |
| 105 | Supply and Fixing of Deep Recess Mounting round 10 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. Make-Ledadvance/Ledos/Ledlum/Philips, Equivalent- Deep Recess Mounting |
| 106 | Providing & Fixing of 5KVA Online UPS Having 12V/26AH 15Nos Batteries & Battery Stand all complete as per drawing and specification and direction of engineer incharge. Make-Aeon- 15Nos Batteries & Battery |
| 107 | Providing & Fixing of Call Bell Chimes all complete as per drawing and specification and direction of engineer incharge. Make-L&T-600 |
| 108 | Providing & Fixing of Modular plate type white RJ 45 CAT 6 Data/Talephone outlet / information outlets ETL verified to meet or exceed TIA / EIA category 6 requirements, universal wiring label permitting to either T568A or T568B, UL listed, for computer networking complete in all respect with cover plate, grid plate, screws, MS box, etc with connections as required with 2nos RJ-45 Data outlet-1478 |
| 109 | Conference Table Made of 19MM Board, Top in 3 layers and Vertical drop in 3 Lair 19MM ply board. All the surface to be cladded with 4MM Veneer & all the Edges to be lipped with 4MM Veneer which shall be Water Based PU Polished, all complete as per design approved by E/I & Architect Incharge. Customized- IGP-SM-51 |
| 110 | \\"Providing & Fixing, High Back Chair's Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair will have adjustable headrestChair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 MODEL, Chair should be BIFMA and Green Guard certified.:- Model-Pixel/Equivalent, Make-Featherlite/Geeken Equivalent.\\"- IGP-SM-52 |
| 111 | \\"Providing & Fixing, Medium Back Chair's Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 cm Arm Rest Height- 18- 27.5 cm Chair should be BIFMA and Green Guard certified. Model-Pixel/Equivalent, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"- IGP-SM-53 |
| 112 | Providing & Fixing of Fixed Leg Chair Made of The frame is made out of 25.4mm tube of 16 gauge tube confirming to IS-7138-1973, Welded by Co2 welding process for uniform surface finish and higher tensile strength perforation on the sheet is of uniform 2.5mm dimension and gives good ventilation.High quality hardware conforming to Hardness 38-44 and tensile strength – 1300 n/mm. IS 1363-1967.Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Japanese T-nuts and riveted in to the plywood.Set and backUpholstery: Cushion with pre-moulded foam of 50 - 60kg/m3 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Injection moulded polypropylene armrests.Leatherette cusion Back on Frame. Back is injected moulded PP.Seat and back are duly upholstered with approved Leatherette. Model-Pixel/Equivalent, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent- IGP-SM-54 |
| 113 | Providing & Making & Fixing of Customized Single Seater Sofa Chair Made of Leatherite Having Wooden Structure Covered with Heavy Duty Cusions all complete as per drawing and specification and direction of engineer incharge.- IGP-SM-56 |
| 114 | Providing & Making & Fixing of Customized Two Seater Sofa Chair Made of Leatherite Having Wooden Structure Covered with Heavy Duty Cusions all complete as per drawing and specification and direction of engineer incharge.- IGP-SM-57 |
| 115 | Providing & Making & Fixing of Customized Peg Tables Made of Wooden & SS Structure all complete as per drawing and specification and direction of engineer incharge.- IGP-SM-58 |
| 116 | Providing & Making & Fixing of Customized Center Tables Made of Wooden & SS Structure all complete as per drawing and specification and direction of engineer incharge.- IGP-SM-59 |
| 117 | \\"Providing & Fixing 3 SEATER Sturdy PU Tandem Made of Seat:Cold consolidation and foaming molding with high density polyurethane(PU), which with high trength metal frame. Armrest:Die casting aluminum alloy with polish treatment and sprayed with static powder. Back:Cold consolidation and foaming molding with high density polyurethane(PU), which with high trength metal frame. Feet:high quality aluminum alloy material, large precision casting mold. Die casting after direct polishing, electrostatic powder spraying treatment. Beam: T=2.5MM Dia=60MM, Hexagonal metal tube, with strong load-bearing capacity and stability Black PP,protect the floor from scratching, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-24920 |
| 118 | \\"Providing & Fixing 2 SEATER Sturdy PU Tandem Made of Seat:Cold consolidation and foaming molding with high density polyurethane(PU), which with high trength metal frame. Armrest:Die casting aluminum alloy with polish treatment and sprayed with static powder. Back:Cold consolidation and foaming molding with high density polyurethane(PU), which with high trength metal frame. Feet:high quality aluminum alloy material, large precision casting mold. Die casting after direct polishing, electrostatic powder spraying treatment. Beam: T=2.5MM Dia=60MM, Hexagonal metal tube, with strong load-bearing capacity and stability Black PP,protect the floor from scratching, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-22450 |
| 119 | Providing & Making & Fixing of Storage Cabinet made of 19mm board, having shelves & shutters & teak wood beading & finished surface of 1mm thick Laminate including all hardware like tower bolts, hinges, lock & handle as per approved drawing & direction of Engineer incharge. MR MR-22327 |
| 120 | Providing and Fixing of Executive Wooden Classic Table of Size (2700Lx1050Wx750HT) MM & Having 2 Nos Side Storage of Size (900Lx450Wx700HT) Made of 2 Layers of 19MM Board with All Edges to be Lipped with Teak Wood Beading & All Outside Exposed Surface To Be Finished With 4MM Veneer which shall be Melamine Polished & Inner Side To Be Finished with 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge. Customized- Executive Wooden Classic Table |
| 121 | Providing and Fixing of Back Storage of Size (2700Lx450Wx700HT) Made of 2 Layers of 19MM Board with All Edges to be Lipped with Teak Wood Beading & All Outside Exposed Surface To Be Finished With 4MM Veneer which shall be Melamine Polished & Inner Side To Be Finished with 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge.-115000 |
| 122 | \\"Providing & Fixing, Table of Size - SIGNATURE 2100MM WITH SIDE STORAGE MAIN TABLE - 2100W X 1000D X 750HT SIDE STORAGE -1050W X 600D X 750HT Specifications: The Signature 2100mm executive desk setup comprises a main desk, side storage, and back storage, offering a comprehensive and premium workstation solution with ample functionality and design appeal. The main desk measures 2100W x 1000D x 750H mm and features a robust tabletop constructed from 25mm thick pre-laminated particle board, finished with 2mm PVC edge lipping for durability and clean aesthetics. An 8mm colored glass is elegantly overlaid on the tabletop, with its edges secured by anodised aluminium beading, enhancing both appearance and protection. The desk is supported by 25mm thick pre-laminated end legs, also finished with 2mm PVC edge lipping, and is paired with a three-drawer pedestal unit integrated into the desk. The drawers are supported by aluminium die-cast arms, offering a sleek and sturdy finish. A modesty panel made from 18mm thick pre-laminated board with 2mm PVC edge lipping is mounted across the front, standing at a height of 450mm to ensure visual privacy. For wire management, the desk is equipped with a 65mm diameter wire manager grommet, along with a flip-up cover, and there is a dedicated provision for CPU placement within the side extension drawer, supporting organized cable routing and system integration. The side storage unit, measuring 1400W x 600D x 750H mm, complements the main desk both in finish and height, providing extended workspace and storage capacity. The back storage unit, measuring 1500W x 450D x 750H mm, features a 25mm thick pre-laminated particle board top with 2mm PVC edge lipping, topped with 8mm colored glass and finished with anodised aluminium beading, mounted on aluminium die-cast arms for a floating visual effect. Its side and back panels are also constructed from 25mm thick pre-laminated particle board with PVC edge protection. The unit includes shutters made of 25mm thick pre-laminated particle board, each equipped with 2mm PVC edge lipping, brushed steel handles, and fitted with soft-close drawer slides and hinges, ensuring smooth and noise-free operation. Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-83697 |
| 123 | \\"Providing & Fixing, Table of Size - SIGNATURE BACK STOARGE:1500WX600DX750H The back storage unit, measuring 1500W x 450D x 750H mm, features a 25mm thick pre-laminated particle board top with 2mm PVC edge lipping mounted on aluminium die-cast arms for a floating visual effect. Its side and back panels are also constructed from 25mm thick pre-laminated particle board with PVC edge protection. The unit includes shutters made of 25mm thick pre-laminated particle board, each equipped with 2mm PVC edge lipping, brushed steel handles, and fitted with soft-close drawer slides and hinges, ensuring smooth and noise-free operation. Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-56535 |
| 124 | \\"Providing & Fixing, Table of Size - COLLABORATE 1500MM WITH SIDE STORAGE AND WITHOUT HEIGHT ADJUSTABLE EXTENSION MAIN TABLE - 1500W X 750D X 750HT COMPOSITE SIDE STORAGE - 1050W X 450D X 750HT The Collaborate 1500mm executive workstation is a thoughtfully designed compact desk setup ideal for modern office environments. The main desk measures 1500W x 750D x 750H mm and is crafted with a 25mm thick pre-laminated particle board tabletop, finished with 2mm PVC edge lipping to ensure long-term durability and impact resistance. The tabletop offers a clean and modern appearance suitable for executive and managerial spaces. The workstation is structurally supported by mild steel (MS) powder-coated loop legs, featuring a distinctive 55x55mm diamond profile. These are paired with die-cast metal connectors and reinforced with MS cross beams, ensuring superior strength and stability while adding a refined industrial aesthetic. A front modesty panel made of 18mm thick pre-laminated particle board with 2mm PVC edge lipping, and a standard height of 450mm, ensures privacy without compromising open design. For integrated electrical management, the desk features a 350mm wide metal flip-up cover with a soft closure mechanism, offering concealed access to switchboards and power/data outlets. The MS cable dump tray beneath the tabletop is designed to house switches and sockets efficiently. Additionally, a vertebra-type vertical wire manager (cable spine) is provided for seamless and organized cable routing from floor level to the desk, enhancing safety and aesthetic appeal. Accompanying the main desk is a composite side storage unit measuring 1050W x 450D x 750H mm, constructed from 18mm thick pre-laminated particle board for a consistent and coordinated look. This side unit offers a combination of closed storage and drawers for functional workspace organization. The configuration includes three drawers (2 box drawers + 1 file drawer) along with shuttered compartments, allowing versatile storage for office supplies, documents, and personal belongings. All shutters are equipped with auto-closing hinges to ensure smooth, silent operation. The drawers and shutters feature integrated finger groove handles for a clean, handle-less appearance, and the entire unit is fitted with a central locking system to ensure safety and security of stored materials. Adjustable shelves provide flexibility in internal space utilization, while levellers ensure stable placement even on uneven flooring. All essential hardware components are included, supporting ease of assembly and reliable daily usage.. Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-36100 |
| 125 | Providing & Fixing, Linear Workstation of Size:- NEO WORKSTATION - 1500X600 Specifications - Partition system WITH PARTITION ON MAIN SPINE , INTERMEDIATE AND ENDS The NEO Workstation is a modern, modular workspace solution designed for efficient and ergonomic usage in collaborative office environments. Each workstation measures 1200W x 600D mm and is integrated with a structured partition system that provides defined workspaces with optimal privacy and utility. The system features partitions on the main spine, intermediate panels, and end panels, creating a consistent, enclosed workspace layout. The partition system stands at a total height of 1200mm and is built using a frame structure with top and side aluminium trims, offering a sleek, modern appearance while maintaining structural integrity. All vertical junctions and corners are finished with high-quality die-cast aluminium caps, ensuring clean detailing and long-term durability. The workstation surface consists of a 25mm thick pre-laminated particle board tabletop, finished on all exposed edges with 2mm PVC edge lipping, enhancing durability and resistance to everyday wear. The tabletop offers ample personal workspace, making it ideal for focused individual tasks within a shared environment. Support for the tabletop is provided through 18mm thick pre-laminated gable ends, offering solid lateral stability while maintaining a minimalist design. The gable ends match the tabletop in finish and style, ensuring a unified look across the workstation cluster. For efficient cable management, the workstation is equipped with a 65mm diameter grommet cap on the tabletop for cable entry. Beneath the surface, a metal raceway tile is provided for mounting electrical switches and sockets, ensuring clean and accessible power connectivity. A metal skirting tile is also included below table level, specifically designed for data cable routing along the main spine, ensuring complete segregation and safety of power and data lines. Tile finishes are thoughtfully planned to enhance both utility and aesthetics. Above table level, the partitions feature fabric tiles, offering tackable surfaces for personal pin-up needs. Each workstation includes one glass marker tile for easy jotting of notes and tasks, and one magnetic tile for pinning magnetic objects or accessories. Below the tabletop, pre-laminated tiles are used for durability and easy cleaning, while metal skirting tiles on the main spine facing the user provide a robust, high-utility finish with integrated cable routing., Make-Featherlite / Geeken / Hof / Ferris/ Equivalent-31550 |
| 126 | \\"Providing & Fixing, MOBILE PEDESTAL 2D1F : 400W X 450D X 600HT The Mobile Pedestal is a compact and durable under-desk storage solution designed for efficient organization of office essentials. With an overall size of 400mm (W) x 450mm (D) x 600mm (H), the pedestal is manufactured from 0.6mm thick Cold Rolled Close Annealed (CRCA) steel sheets, which are powder coated to ensure a high-quality finish that resists corrosion, scratches, and general wear. This unit features a three-drawer configuration, consisting of two box drawers for storing stationery and smaller items, and one filing drawer capable of accommodating hanging files and larger documents. All drawers are mounted on smooth sliding channels, providing seamless and quiet operation during daily use. The pedestal is designed as a mobile unit, equipped with heavy-duty castors that allow for easy movement and repositioning under the workstation or within the workspace. Despite its mobility, the unit maintains structural stability and ergonomic accessibility. A central locking mechanism is integrated into the design, allowing all three drawers to be simultaneously locked with a single key, enhancing document security and user convenience. The compact size allows it to fit easily beneath most standard-height desks while providing ample storage space for individual user needs. This mobile pedestal is an ideal addition to any modern office setup, offering a balance of mobility, functionality, and secure storage.\\"-12650 |
| 127 | \\"Providing & Fixing, SIDE STORAGE METAL (900X450X1200HT) Supplying and installation of a robust steel almirah designed for office storage applications. The unit shall be installed in a perfectly upright and straight position to ensure alignment, stability, and optimal utility. The overall dimensions of the almirah are 900mm (Width) x 450mm (Depth) x 1200mm (Height), inclusive of integrated legs that elevate the unit off the floor for easy cleaning and enhanced air circulation. The almirah structure is fabricated using high-yield strength Cold Rolled Close Annealed (CRCA) steel sheets of grade 'D' conforming to IS: 513 standards. The door panel is made from 1.0mm thick CRCA sheet, providing added rigidity and durability, while all other structural components are manufactured from 0.8mm thick CRCA sheet to balance strength and weight. For enhanced load-bearing performance, internal stiffeners are integrated within both the shelves and the door, ensuring long-lasting structural integrity and resistance to deformation. Internally, the almirah is equipped with two adjustable shelves, resulting in three loading compartments, each with a clear usable height of approximately 400mm, allowing versatile storage of files, documents, and supplies. The shelves feature a folded construction, which imparts intrinsic rigidity and enhances their load-carrying capacity, capable of supporting up to 40kg of uniformly distributed weight per shelf. The unit is fitted with a steel-hinged door, incorporating a three-way locking mechanism and secured with a 6-lever lock and key. A durable lever handle is provided for smooth and secure operation. All locking components ensure safety of contents and are suited for regular office use. The entire metal assembly undergoes a multi-stage surface treatment process, including iron phosphating for rust resistance, followed by electrostatic powder coating in a finish thickness of 60–80 microns, offering excellent adhesion, abrasion resistance, and aesthetic appeal., Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-17500 |
| 128 | \\"Providing & Fixing, Supplying and installation of a heavy-duty office steel almirah of overall dimensions 900mm (W) x 450mm (D) x 2400mm (H), designed to meet robust storage requirements in office and institutional environments. The unit is constructed with a fully welded body ensuring long-term structural rigidity and resistance to deformation under load. The almirah is fabricated using CRCA ‘D’ grade high yield strength steel, conforming to IS:513, ensuring superior strength and performance. The shelves are made from 0.7mm thick steel, while the back panel and doors are fabricated using 0.8mm thick high yield CRCA sheet, offering enhanced resistance against bending and wear. All other structural components, including side panels and top/bottom, are manufactured from 0.9mm thick CRCA steel, providing a solid and reliable enclosure. The unit features four height-adjustable shelves, supported by a shelf mounting system that allows vertical reconfiguration as per user needs. Each shelf is designed to support a uniformly distributed load (UDL) of up to 40 kg, making it suitable for storing files, office supplies, or other moderately heavy materials. The doors are reinforced and mounted with a three-way locking mechanism fitted with shooting bolts at the top, bottom, and center, ensuring secure storage and minimizing the risk of unauthorized access. A premium Mazak handle is provided, which is both corrosion-resistant and durable, offering a refined, long-lasting locking interface. For floor-level stability, especially on uneven surfaces, the unit is equipped with M10 screw-type levellers featuring hexagonal plastic bases, allowing easy adjustment and maintaining balance without damaging flooring. The entire metal body is treated with a multi-stage cleaning and phosphating process before finishing. The surface is then epoxy powder coated to a thickness of 50 microns (±10 microns), offering excellent adhesion, corrosion resistance, and a smooth, uniform finish suitable for high-use environments. This steel almirah is an ideal storage solution for offices, educational institutions, and government facilities, providing a secure, long-lasting, and aesthetically pleasing unit that meets stringent quality and performance standards., Make-Featherlite/Geeken Equivalent.\\"-30100 |
| 129 | Providing and Fixing of TV Pannel of Size (2100Lx450Wx750HT) Made of 2 Layers of 19MM Board with All Edges to be Lipped with Teak Wood Beading & All Outside Exposed Surface To Be Finished With 4MM Veneer which shall be Melamine Polished & Inner Side To Be Finished with 1MM Laminate, Complete In All Respect As Per Drawing, Specification Approved By Architect/ Engineer In Charge.-95000 |
| 130 | \\"Providing & Fixing, High Back Chair's Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair will have adjustable headrestChair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 MODEL, Chair should be BIFMA and Green Guard certified.:- AMAZE HB, Make-Featherlite/Geeken Equivalent.\\"- 15445.00- |
| 131 | \\"Providing & Fixing, Medium Back Chair's Seat and back is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Imported T-nuts and revited in to the wood.Gaslift - Class 4 tested -ANSI BIFMA performance standards.Castors - Twin Castors 50mm dia castors compling to ANSI / BIFMA X 5.1 – 2002.The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength.Tested prudently and rigorously as per ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards.Upholstery: Seat Cushion with pre moulded foam having leatherette tapestery of 50 - 60 density Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Distinctively and characteristically designed tilt mechanism offering a very smooth and fluidic reclining motion with tension adjust knob and importantly offering seat to back recline ratio of 3:7, optimal for good back support.Multilock mechanism is fabricated from CR Sheets, undergo through CO2 welding process imparting uniform surface finish and tensile strength. The components are processed with high degree of precision and care so as to assemble with other parts in perfect harmony to give smooth and effortless reclining experience. Tension springs are made out Grade II material conforming to Indian Standards. Also provided with release levers for locking mechanism and height adjustment of seat. Mechanism aides to operate the height adjustment, and has been equipped with 3 locking positions, back rest “ Return Prevention” function. Back Frame is inserted with leathertte tapestery cushion & Adjustable Lumbar Support.Tension control is below the Seat.Moulded polyurethene Arms confirming to IS 7078 with steel inserts for long Moulded self skinned polyurethene Arms confirming to IS 7078 with steel insets for long life. one way adjustable - Height Adjustable.Seat is duly upholstered with approved fabric. Chair Should be BIFMA Certified.Seat: Depth- 51.5 cm Width- 44.5 cm Dimensions: Width- 51.5 cm Depth- 53.5 cm Minimum Height- 99.5 cm Maximum Height- 108.5 cm Minimum Seat Height- 44.5 cm Maximum Seat Height- 52.5 cm Width (Arm to Arm)- 66 cm Arm Rest Height- 18- 27.5 cm Chair should be BIFMA and Green Guard certified. AMAZE MB, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-13565 |
| 132 | Providing & Fixing, Fixed Leg Chair Made of The frame is made out of 25.4mm tube of 16 gauge tube confirming to IS-7138-1973, Welded by Co2 welding process for uniform surface finish and higher tensile strength perforation on the sheet is of uniform 2.5mm dimension and gives good ventilation.High quality hardware conforming to Hardness 38-44 and tensile strength – 1300 n/mm. IS 1363-1967.Seat is made out of 12mm molded hot pressed plywood in ergonomic shape fitted with Japanese T-nuts and riveted in to the plywood.Set and backUpholstery: Cushion with pre-moulded foam of 50 - 60kg/m3 density in the shape of plywood. Density -- 52 kg/m3 Hardness -- 12.6kgf at 25%.Injection moulded polypropylene armrests.Leatherette cusion Back on Frame. Back is injected moulded PP.Seat and back are duly upholstered with approved Leatherette. AMAZE VA, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent-9815 |
| 133 | Providing & Fixing, Medium Back chair Having Base: Nylon Base- The 640mm dia (26 inches) five pronged base is made out of GF nylon – Reinforced with bottom ribbing for additional buttress and strength. Tested prudently and confirming to ANSI/BIFMA X5.1-2011 General Purpose Office Chair Standards. The base shall be 67 cm pitch-center diameter -77 cm with castors. MS ring will be insert molded for better grip in the swaged taper. Castors: Twin Castors 50mm dia complying to ANSI / BIFMA X 5.1 – 2002. Castors will be made in PP. The axle pin will be rust protected- Zinc pacified. The pin should be designed to have push fit with lock ring. RoHS compliant castors. Gas lift: Standard Gas lift 100 mm stroke with pneumatic height adjustment as per the seat height criteria. - Class 4 as per ANSI BIFMA performance standards. Possibility to increase the seat height if required with Gas lift stroke- 110 -125 mm. Mechanism:Centre Tilt Mechanism: compact and stable with 8″ x 6″ mount holes as per European Standard. Initial seat angle of 3 degrees and full recline angle of 20 degrees for ergonomic comfort. Provided with common lever for locking and up/down adjustment and horizontal movement of the lever to engage and disengage lock at upright position Lever provided for rotational movement to operate gas lift and adjust chair height to user specification. Full length plastic knob provided to cover lever bar giving better aesthetical appeal to the mechanism. Knob provided to adjust spring tension to suit individual user in order to ensure maximum chair comfort. Arms:Fixed Arms Injected molded arms- polyurethane 20% GF nylon. The polypropylene arms will have steel inserts. The arm profile should blend with the back profile without gap. Seat: Seat Height- 450-540mm with hydraulic height adjustability of 90-100mm. Seat Width & Height- Size of the chair shall be -Back: 45.0cm. (w) x 59.0cm.(H) .Seat: 48.0cm (w) X 49.0cm.(D). Chair back should be connected to the Polyurethane arms for achieving comfortable seating posture.Effective back height from Seat - 560mm, Ply wood- 12 mm thick with 7 ply. Fire retardant type exterior grade phenol formaldehyde bonded. It will be hot pressed ply - conforming to I.S.I. 5509. The arm and back shall be fixed together to the seat with Allen bolts.The bolts will be screwed to the “T” nuts fixed to the plywood seat. Fabric: Upholstery: Seat & Back are duly upholstered with approved fabric. The back should have the option of mesh back AN-70 (black) and AN-75(grey). GSM for mesh 340. No flaming or progressive smolderingwithin one hour of placement of the cigarettes. Fire rated fabric confirming to BSEN 1021 and IS 15061-2012 Foam: Seat cushion with pre molded foam of 50 - 60 density in the shape of plywood. Density -- 52 kg/m3, Hardness -- 12.6kgf at 25%- Back cushion- density- 32g/sq in. Back:Mesh back on injected molded PP with 30% GF nylon. The back should have the option of mesh or fabric back. The mesh will be GSM 340 grade. . ALPHA MB, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent-8822 |
| 134 | Providing & Fixing, Single Seater Sofa of Size: 850L X 790D X 790H Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes, S-SERIES, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent-30185 |
| 135 | Providing & Fixing, Two Seater Sofa of Size: 1750L X 790D X 790H Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes, S-SERIES, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent-46305 |
| 136 | Providing & Fixing, Three Seater Sofa of Size: 2050L X 790D X 790H Seat Foam: the sofa is made up of fine quality leatherette.The structure is made up of silver wood and pine wood.The Seat is made of PU Foam with Density 32 to 40 +/- 2 kg/cu .mtr Seat is upholstered wuth Leatherite.Back Foam: The Back is made of PU Foam with Density 32 to 40 +/- 2 kg/cu, Backis upholstered with Leatherite.Unterstructure is made up of silver wood or pine wood , 4mm Dia zigzag Spring is mounted in the understructure for support and additional cushioning purpose. Legs should be made up of stainless steel tubes/pipes, S-SERIES, Make-Featherlite / Geeken / Hof / Ferris/ Equivalent-61269 |
| 137 | \\"Providing & Fixing, CENTER TABLE @900 MM DIA, MODEL: CT-2105 MARBLE CENTER TABLE (0.9M), TOP - STONE , BASE - BLACK TIATANIUM. Supplying and installation of a contemporary center table designed to complement modern office and lounge interiors. The table has an overall dimension of 600mm (Length) x 600mm (Width) x 425mm (Height), offering a spacious and proportionate surface suitable for waiting areas, meeting lounges, or collaborative spaces. The tabletop is made from 12mm thick toughened glass, offering high impact resistance and durability. The glass is partially tempered, adding safety features to reduce the risk of sharp breakage. The top profile is square-edged with bevelled edges, enhancing the aesthetics while ensuring user safety through smooth contours and soft corners. The glass top is supported by high-quality vacuum suction caps, securely fixed over the underframe to ensure firm and stable placement without visible fasteners, contributing to a clean, floating appearance. The understructure consists of a stainless steel (SS) frame fabricated from SS 202 grade pipe, known for its corrosion resistance and strength. The pipes used in the frame have a diameter ranging from 20mm to 25.4mm and a wall thickness of 2mm, providing superior load-bearing capacity and structural stability. The frame is finished in a high-gloss chrome finish, offering a sleek, premium look suitable for modern interiors. To protect flooring surfaces and enhance stability, the table is equipped with high-quality PPCP (Polypropylene Copolymer) shoes at the base of each leg. These shoes prevent scratches and scuffs on delicate floors while also absorbing minor impact loads. This center table combines the durability of stainless steel with the elegance of toughened glass, making it a stylish, low-maintenance, and long-lasting addition to any office or hospitality environment., Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-27500 |
| 138 | \\"Providing & Fixing, CENTER TABLE @500 MM DIA, MODEL: CT-2105 MARBLE CENTER TABLE (0.5M), TOP - STONE , BASE - BLACK TIATANIUM. Supplying and installation of a contemporary center table designed to complement modern office and lounge interiors. The table has an overall dimension of 600mm (Length) x 600mm (Width) x 425mm (Height), offering a spacious and proportionate surface suitable for waiting areas, meeting lounges, or collaborative spaces. The tabletop is made from 12mm thick toughened glass, offering high impact resistance and durability. The glass is partially tempered, adding safety features to reduce the risk of sharp breakage. The top profile is square-edged with bevelled edges, enhancing the aesthetics while ensuring user safety through smooth contours and soft corners. The glass top is supported by high-quality vacuum suction caps, securely fixed over the underframe to ensure firm and stable placement without visible fasteners, contributing to a clean, floating appearance. The understructure consists of a stainless steel (SS) frame fabricated from SS 202 grade pipe, known for its corrosion resistance and strength. The pipes used in the frame have a diameter ranging from 20mm to 25.4mm and a wall thickness of 2mm, providing superior load-bearing capacity and structural stability. The frame is finished in a high-gloss chrome finish, offering a sleek, premium look suitable for modern interiors. To protect flooring surfaces and enhance stability, the table is equipped with high-quality PPCP (Polypropylene Copolymer) shoes at the base of each leg. These shoes prevent scratches and scuffs on delicate floors while also absorbing minor impact loads. This center table combines the durability of stainless steel with the elegance of toughened glass, making it a stylish, low-maintenance, and long-lasting addition to any office or hospitality environment., Make-Featherlite / Geeken / Hof / Ferris/ Equivalent\\"-16300 |
| 139 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.DSR 2022 E-M- 17.1.2 |
| 140 | Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.DSR 2022 E-M- 17.1.3 |
| 141 | Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.DSR 2022 E-M- 17.1.5 |
| 142 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. completDSR 2022 E-M- 17.1.6 |
| 143 | Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 06 Zone panel for fire alarm system. 100 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required - 1 No. Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos. talk back unit -1 Set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 Set. Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 Set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 30 AH Each sealed maintenance free batteries -1 Set.-40185.71 |
| 144 | Supplying & laying of 2x1.5 Sqmtm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.-142.7 |
| 145 | Supply,Installation, Testing & Commissioning ISI marked portable type fire extinguishers of 4.5 Kg capacity CO2 type as per IS- 15683 complete as per specification and fixed / install as per site condition:-9337 |
| 146 | Supply,Installation, Testing & Commissioning ISI marked portable type fire extinguishers of 5 Kg capacity ABC Dry Chemical powder as per IS- 15683 complete as per specification and fixed / install as per site condition :-6460 |
| 147 | Supply & Fixing of AC remote all complete, specification and direction as approved by Engineer -in-Charge.- AC Remote |
| 148 | Supply & Fixing of Ac grill paint all complete, specification and direction as approved by Engineer -in-Charge.- AC Grill |
| 149 | Supply & Fixing of Copper AC pipe all complete, specification and direction as approved by Engineer -in-Charge.- Copper AC pipe |
| 150 | Supply, Installation, Testing & Commissioning of Hi-Wall Type Unit- 1.65 TR + Corded Remote + Refnet, Model-FXAQ50 all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-49720 |
| 151 | One Time Lifting, shifting, positioning, installation, testing of indoor units, outdoor units, fittings (Imported Y-joints & header etc.) remote controls of indoor units, complete as per specification and drawings, all complete as per drawing, specification and direction as approved by Engineer -in-Charge. INDOOR HI-WALL UNITS-2500.001 |
| 152 | Commissioning of VRV systems including topping R410A gas per site requirements all complete as per drawing, specification and direction as approved by Engineer -in-Charge.- VRV Systems |
| 153 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 28.6 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-2700 |
| 154 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 22.2 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-2050 |
| 155 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 19.1 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-1900 |
| 156 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 15.9 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-1660 |
| 157 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 12.7 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-1350 |
| 158 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 9.5 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-1050 |
| 159 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 6.4 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-850 |
| 160 | Providing & Laying of Cable tray for copper pipe 300MM all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-1190 |
| 161 | Providing & Laying of Cable tray for copper pipe 200MM all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-950 |
| 162 | Supply, Installation, testing and commissioning of Hard PVC Pipe Suitable for 10 Kg/cm2 water pressure including fittings such as elbow, socket, reducer, etc.insulated with 6 mm thick tubular nitrile insulation, 50 mm dia with 6 MM thickness all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-650.001 |
| 163 | Supply, Installation, testing and commissioning of Hard PVC Pipe Suitable for 10 Kg/cm2 water pressure including fittings such as elbow, socket, reducer, etc.insulated with 6 mm thick tubular nitrile insulation, 40 mm dia with 6 MM thickness all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-595 |
| 164 | Supply, Installation, testing and commissioning of Hard PVC Pipe Suitable for 10 Kg/cm2 water pressure including fittings such as elbow, socket, reducer, etc.insulated with 6 mm thick tubular nitrile insulation, 32 mm dia with 6 MM thickness all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-442 |
| 165 | Supply, Installation, testing and commissioning of Hard PVC Pipe Suitable for 10 Kg/cm2 water pressure including fittings such as elbow, socket, reducer, etc.insulated with 6 mm thick tubular nitrile insulation, 25 mm dia with 6 MM thickness all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-273 |
| 166 | Providing & fixing control cum transmission wiring of copper in suitable conduits between indoor and out door unit all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-228 |
| 167 | Supply & Laying of M S Slotted Angle for pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-260 |
| 168 | Wall Chaseing as per site requirement all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-180 |
| 169 | Making Core cutting in Walls, Beams, RCC structure as per site requirement all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-3500.001 |
| 170 | Nitrogen Flushing & Leak Check for all Refrigerant pipes etc all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-500 |
| 171 | Supply, Installation, testing and commissioning of IP fixed Cameras, Network TDN IR Indoor/Outdoor Camera, 1/3\\" CMOS, 2 MP, 3.6 mm Fixed, 24 IR LEDs, PoE, H.264 complete. Make - Dahua- Network TDN IR |
| 172 | Supply, Installation, testing and commissioning of 32 VMS channel NVR with Embedded enterprise grade linux processor, real-time H.265 Security baseline 2.1, 1080p@30 fps adaptive decoding, ONVIF and RTSP protocols, resolution HDMI 4K, AI Face detection, perimeter protection, IVS, people counting, heat map, and SMD, BW 160 Mbps, Audio PCM/G711A/G726/AAC, privacy masking, video loss, scene changing, PIR alarm, SATA III port up to 10 TB. Make Dahua/HikVision-40611 |
| 173 | Supply, Installation, testing and commissioning of 6TB SATA Internal with 1M hours MTBF, 180 TB workload rate, write-intensive, low bit-rate, high stream-count, prioritized write-op. Make - WD/Seagate-18645 |
| 174 | Supply, Installation, testing and commissioning of HDBaseT Hdmi Extender Make - Milestone/Bluestream-20031 |
| 175 | Providing, Installation, Testing & Commissioning of Hig Performance 1.4a standard HDMI 4K Cable. Make - Extron/Nedis/Logic/DC-7131 |
| 176 | Supply, Installation, testing and commissioning of Carrier-Grade IP Phones, 2-line model, zero-touch provisioning, 5-way voice conferencing, integrated PoE. Make - Grandstream-8459 |
| 177 | Supply, Installation, testing and commissioning of Carrier-Grade IP Phones, 6-line model, 4.3 inch color LCD screen, zero-touch provisioning, 5-way voice conferencing, integrated PoE. Make - Grandstream-24360 |
| 178 | Supply, Installation, Testing & Commissioning of 27U Rack Make - Dlink/Comrack- IGP-SM-97 |
| 179 | Supply, Installation, Testing & Commissioning of Rack accessories Make - Dlink/Comrack- IGP-SM-98 |
| 180 | Supply, Installation, testing and commissioning of Cat 6 patch panel, loaded. Make - Dlink-5127 |
| 181 | Supply, Installation, testing and commissioning of modular patch cables 1m 10/100/1000 Make - AMP/Molex/DC-400 |
| 182 | Supply, Installation, testing and commissioning of 24 port POE switch 10/100/1000. Make - Dlink/Netgear- Dlink/Netgear |
| 183 | Supply, Installation, testing and commissioning of Dual Band Wave Wifi 6 Access Points. Make - Grandstream/Netgear- Grandstream/Netgear |
| 184 | Supply, Installation, Testing & Commissioning of LB VPN Gateway . Make - Grandstream- IGP-SM-103 |
| 185 | Supply, Installation, Testing & Commissioning of XL Series efficient Amplifier built for demanding commercial sound applications, highly efficient. Make - JBL Crown- IGP-SM-67 |
| 186 | Supply, Installation, Testing & Commissioning of Constant Beamwidth Technology Line Array Column Loudspeaker, High Sensitivity 80 Hz – 20 kHz, 8Ohms & 70V / 100V Distributed Lines. Make - JBL- IGP-SM-68 |
| 187 | Supply, Installation, Testing & Commissioning of 2 Way in celing ohigh-fidelity loudspeaker, High Sensitivity74 Hz – 20 kHz. Make - JBL/Russound- IGP-SM-69 |
| 188 | Supply, Installation, Testing & Commissioning of Central Conference Controller with Recording & Web Server Conference Controller with built-in Digital Signal Processing Control upto minimum 50 Discussion Unit and expandable upto 150 Discussion Unit by configuring multiple Controller Unit. Make - Televic- IGP-SM-70 |
| 189 | Supply, Installation, Testing & Commissioning of Chairman Discussion Flush Mount Unit with Removable Microphone : Modern, sleek, and contemporary design, Removable microphone connector, Digital signal processing, Shielded microphone, immune to mobile phone interference, Microphone On/Off button, Loop-through, daisy-chain cabling, Bi-color bar indicator. Make - Televic- IGP-SM-71 |
| 190 | Supply, Installation, Testing & Commissioning of Delegate Discussion Flush Mount Unit with Removable Microphone : Modern, sleek, and contemporary design, Removable microphone connector, Digital signal processing, Shielded microphone, immune to mobile phone interference, Microphone On/Off button, Loop-through, daisy-chain cabling, Bi-color bar indicator, Microphone On/Off or Request-to-speak push button with 2 signaling LEDs. Make - Televic- IGP-SM-72 |
| 191 | Supply, Installation, Testing & Commissioning of UHF Wireless Microphone with 30Mhz selection bandwidth professional balanced XLR output ; audio clip led on reciever. Single AA size battery ; gain control; low battery status indicator; Noiseless on-off mute switch.- IGP-SM-73 |
| 192 | Supply, Installation, Testing & Commissioning of Extension cables assembly of length 25m. Make - Custom- IGP-SM-74 |
| 193 | Supply, Installation, Testing & Commissioning of Extension cables assembly of length 3m. Make - Custom- IGP-SM-75 |
| 194 | Supply, Installation, Testing & Commissioning of 2 Core 16AWG 1.5Sq mm. Copper, Oxy-free sheated cable. Make - Custom- IGP-SM-76 |
| 195 | Supply, Installation, Testing & Commissioning of Interconnects & Connectors- IGP-SM-77 |
| 196 | Supply, Installation, Testing & Commissioning of LED Wall indoor Size 130\\" Diagnol, 1.5mm Pixel Pitch based LED Display for Conference Room main wall, Contrast Ratio 6000:1, Refresh Rate 3840 Hz, Half Gain Viewing Angle H: ± 150°, V: ± 150° , Lifetime 100,000 hours, Service Access Front/, IP Grade IP20, Brackets to fasten the MS/Aluminum extrusion to be made of MS with powder coating, Power Distribution Unit etc, all complete as per drawing and specification and direction of engineer incharge. Make - Samsung- IGP-SM-78 |
| 197 | Supply, Installation, testing and commissioning of 65\\" high resolution 4k UHD Crystal Pro LFD with HDMI port . All accessories for installation including wall mounting stand/ bracket. Make - Samsung- IGP-SM-79 |
| 198 | Supply, Installation, Testing & Commissioning of Extender HDMI Extender Supports resolutions up to 4K/UHD 60 Hz 4:2:0, HDBaseT extender for HDMI, EDID filtering prevents extension of unsupported resolutions, HDBaseT link test verifies cable, termination, and link quality, HDCP 2.2 compliant. Make - Milestone Pro/ Bluestream- IGP-SM-80 |
| 199 | Providing, Installation, Testing & Commissioning of Hig Performance 1.4a standard HDMI 4K Cable. Make - Kordz/Nedis/Logic-5267 |
| 200 | Supply, Installation, Testing & Commissioning of 4x4 HDMI® HDBaseT matrix switcher, 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats, HDCP 2.2 compliant, TCP/IP, RS-232, and IR control. Make - AMX/Milestone Pro/Aten/Bluestream- IGP-SM-82 |
| 201 | Supply, Installation, Testing & Commissioning of 1x4 HDMI® HDBaseT splitter, 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling, plus support for HDR formats, HDCP 2.2 compliant, TCP/IP control. Make - AMX/Milestone Pro/Aten/Bluestream- IGP-SM-83 |
| 202 | Supply, Installation, testing and commissioning of professional-grade PTZ camera with 20x optical zoom lens, H.264/H.265 streaming, USB network, RS485 and RS232 interfaces to control and 1080p60 HDMI video Make - Clearone/Lumens- IGP-SM-84 |
| 203 | Supply, Installation, testing and commissioning of PTZ Boom Mount Kit. Make - Custom- IGP-SM-85 |
| 204 | Supply, Installation, testing and commissioning of 4 Channel Multiview, recorder and live streaming Camera processor with HDMI and Ethernet Inputs, 1 TB Inbuilt Storage Make - Lumens- IGP-SM-86 |
| 205 | S.I.T.C of HDMI Capture to USB with passthrouh. Make - AverMedia/Milestone- IGP-SM-87 |
| 206 | Wireless AV platform allows simultaneous content sharing for up to four 1080p presenters , casting Miracast, Google Cast, and AirPlay , Visible wireless streams Up to 4 , Supports YouTube Live streaming, supports 3840×2160@60/59.9/50/30/29.97/25/24/23.98 Hz. Make- Atlona/Screen Beam/ Milestone/ A&T-144540 |
| 207 | SITC of: Hardware Gateway for AV Control and Management AV asset management,access from a web browser for setup and management for configuring AV devices over the network,Dual Gigabit Ethernet ports for isolating a dedicated AV LAN from the facility or corporate network, Supports industry-standard, network security features and protocols, support upto 250 simultaneous IP connections - Make - AMX/Aten/Crestron.- IGP-SM-90 |
| 208 | Ultra-thin Intel NUC Core system with 8gb ram and 256gb nvme ssd, wireless keyboard. Make Intel.- IGP-SM-91 |
| 209 | KVM Extender Kit. Make - Milestone/Bluestream- IGP-SM-92 |
| 210 | Supply, Installation, testing and commissioning of Touch Screen - Apple Ipad.- IGP-SM-93 |
| 211 | Supply, Installation, testing and commissioning of Touch Screen - Docking Station Make - Iport.- IGP-SM-94 |
| 212 | Supply, Installation, testing and commissioning of Ipad Docking Case with charging port accessory for Iport Base Station. Make - Iport.- IGP-SM-95 |
| 213 | Supply, Installation, testing and commissioning of TPC-IPAD Controller App License. Make - AMX.- IGP-SM-96 |
| 214 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 41.3 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-3900 |
| 215 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported 34.9 mm all complete as per drawing, specification and direction as approved by Engineer -in-Charge.-3100 |
| 216 | 1 run of cableDSR 2022 E-M- 1.53.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender