Power Boards / Undertakings / PSU Closing in 8 days TDR #56315031

Tender For Construction Of Steel Structural Warehouse For Housing 2 Nos. 250 Kva Dg Sets Including Site Development And Associated Civil, Structural And Miscellaneous Allied Works At Neepco Colony, Tato.

Issued by Boards / Undertakings / PSU · Shi Yomi, Arunachal Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Jul 2026
8 days left
EMD
57100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Shi Yomi → Arunachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Steel Structural Warehouse For Housing 2 Nos. 250 Kva Dg Sets Including Site Development And Associated Civil, Structural And Miscellaneous Allied Works At Neepco Colony, Tato.

BOQ

Name of Work:- Construction of Steel Structural Warehouse for housing 2 Nos. 250 kVA DG Sets including site development and associated civil, structural and miscellaneous allied works at NEEPCO Colony, Tato.
Sl. No. Item Description
1Specifications
2Excavation in Hill Area in Soil by Mechanical Means (Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres)
3Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.a) Ordinary Soil
4Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
5Dry rubble Flooring / Stone Soling.
6Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth
7Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement.c) 75 mm thick
8Reinforcement of RCC work including bending, binding and placing in position complete.b) Tar/TMT steel
9Centring and shuttering including strutting proping etc. and removal of form work for:c) Columns, pillars and piers.
10Centring and shuttering including strutting proping etc. and removal of form work for:b) Walls including attached buttresses, pilasters etc.
11Centring and shuttering including strutting proping etc. and removal of form work for:a) Foundations and plinth.
12Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
13Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement.a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
14Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications including loading, unloading, transportation, etc.(A) Random Rubble Masonry
15Brick work with best available local bricks in foundations and plinth in cement mortar 1:6 (1 cement : 6 fine sand).
16Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.
17Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in:a) Foundations and plinth
18Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).
19Providing and fixing Durashine zinc- Aluminium alloy coated (TATA Bluescope building product) sheet roofing fixed with necessary fasteners and lapping method as described by the manufactureer inclusive of cutting, hoisting and fixing complete, excluding the cost of purlins,rafters and trusses. Details of cost for 179.655 sqm laying and fixing 20 sheets in 3row require overall sheet area of 20x3x3.05x1.072 plus 3% wastage=202.061 sqm after H & L lapping as permanufacterers specificatio,effective area Measurable will be 20x3x2.95x1.015=179.655
20Welding by Electric plant
2120 mm cement plaster 1 : 4 (1 cement : 4 fine sand).
22Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size).
23Providing and fixing water closet squating pan (Iindian type W.C. Pan ) with 100 mm sand cast Iron P or S trap, 10 litr low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:a) White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.
24Construction of soak pit 1.2 x 1.1 x 1.2 m filled with brick bats including SW drain pipe 100 mm dia and 1.20 m long complete as per standard design.
25Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes.a) 100 mm dia
26Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. b) 75 mm dia
27Providing and fixing sand cast iron heel rest sanitary bend.a) 100 mm dia
28Providing and fixing sand cast iron heel rest sanitary bend.b) 75 mm dia
29Providing and fixing flush door shutters, decorative type, core of black board construction with frame of 1st class hard wood and well matched 1st class teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.a) 40 mm thick including anodized aluminum butt hinges with necessary screws
30Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finsihing the top smooth.
31Cement plaster skirting up to 30 cm height with cement mortar 1:3 (1-cement : 3- coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (a) 18mm thick.
3212mm cement plaster 1:4 (1 cement : 4 fine sand).
33Neat cement punning
34Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete.
35Loading and Unloading of Stone Boulder / Stone aggregates / Sand / Kanker/Moorum / Lime / Shingle / Earth / Excavated Rock and Kerb Stone for hill roads. Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, excluding time for haulage and return trip.
36Loading and Unloading of Cement / Steel / Structural Steel / RC Pipe / Wooden Logs / Bricks / Bitumen and Timber etc, by Manual Means and Stacking for hill roads.
37Cost of Haulage of Excluding Loading and Unloading on hill roads. Haulage of materials by truck excluding cost of loading, unloading and stacking.Surfaced Road Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56315031
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 17-07-2026
Authority
Authority Name North Eastern Electric Power Corporation Limited
Work Description Tender for Construction Of Steel Structural Warehouse For Housing 2 Nos. 250 Kva Dg Sets Including Site Development And Associated Civil, Structural And Miscellaneous Allied Works At Neepco Colony, Tato.
Basic Detail
Tender No NEEPCO/CCD/TATO-II/2026-27/02 DTD 04/07/2026
Bidding Type Tender
Location
City Shi Yomi
State Arunachal Pradesh
Key Dates
Publish Date 04 Jul 2026
Submission Date 17 Jul 2026
Open Date 18 Jul 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 57100
Exemption Not Available
Document List
BOQ_330188.xls
e2a3a4e8-f81b-424b-bbf1-435611cc33b4.html
Tendernotice_1 (2).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 17, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Jul 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 9 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_330188.xls

html

e2a3a4e8-f81b-424b-bbf1-435611cc33b4.html

pdf

Tendernotice_1 (2).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders