Tender For Provision Of Institute Logo And Brass Signage At The East Gate Of Aiims Mangalagiri, Complete With Architectural Lighting And Associated Electrical Works
Tender Value
22.75 Lakhs
Estimated cost
Bid Submission
11 Jul 2026
4 days left
EMD
45514
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Guntur → Andhra Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Institute Logo And Brass Signage At The East Gate Of Aiims Mangalagiri, Complete With Architectural Lighting And Associated Electrical Works
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. |
| 3 | All kinds of soil |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 5 | In cement mortar |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Centering and shuttering including strutting, propping etc.and removal of form for : |
| 9 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 11 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level. |
| 13 | Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 14 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 15 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red |
| 16 | Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately). |
| 17 | 75 mm thick back filling for pitching including supplying of required materials and consolidation etc. complete with : |
| 18 | Moorum |
| 19 | Stone aggregate 20 mm nominal size |
| 20 | Stone aggregate 40 mm nominal size |
| 21 | Providing and fixing External Signage's made of SS316 (brush finish) 3mm thk. plate for Logo part and letters raised by powder coated with brand color with translit print. Including all fittings, accessories, fixtures, fabrication Painting etc., The cost to include Scafolding, required supports to fix signage on slab. The signage will be illuminated with approved LED's along with SMPS and timer fixed on the wall with necessary fixtures. Size: 2450mm x 2450mm. |
| 22 | Providing and fixing of Brass letters and Logo complete, including fabrication, polishing, mounting arrangements, fixing hardware, and installation at all heights and levels as directed by the Engineer-in-Charge. ALL INDIA INSTITUTE OF TECHNOLOGY MANGALAGIRI & AIIMS LOGO. |
| 23 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 24 | 1:4 (1 cement: 4 fine sand) |
| 25 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 26 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 27 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 29 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 30 | ELECTRICAL |
| 31 | Supply installation testing and commissioning of 40W floodlight with housing made of Extruded aluminum with die-cast aluminum end caps electrostatically applied polyester powder coating, high lumen output, exterior rated architectural flood light,Circular/ Rectangular/square (as per site requirement) suitable for facade, lighting applications. The robust mechanical design and highly efficient optical design make it ideal, with dynamic color. Luminaire is made 20LED5/10/15/20/25/30/40/45/60 ,degree beam angle,LED RGB/ RGBWW/ RGBNW/RGBA/RGBW Luminaire should have efficacy of minimum 40 lm/W CRI>80, SDCM<4, Anti-aging and anti-UV high optical efficiency PMMA lenses, of with tilting adjustability of Tilting angle ±90°, DMX512 control interface. Luminaire has an input voltage range of 220-240 VAC, 50/60Hz, (230Vac/50Hz, full load), operating temperature -40°C to 50°C, IP66 & IK06 protection, Lumen maintenance of 50,000 hrs @ L50 at 35°C. Soft Copy of Catalogues, Test Certificates - Third party LM79, LM80, BIS R Number, IES Files, Polar curve, Illuminance diagram, CE, and CB is mandatory. The luminaire should have an IEC classification as CLASS1. |
| 32 | Supply and fixing of ZXP399 Lead 4P DMX cable, Each cable having length of 2m and 10 pieces in a set Leader Cable. |
| 33 | Supply and fixing of ZXP339 Jump 4P DMX cable, Each cable having length of 2m and 10 pieces in a set Jumber Cable |
| 34 | Supply & fixing of RDM-6Wall Splitter is a 6-output DMX/RDM splitter with DMX/ RDM pass-through supporting bi-directional communications for discovery, addressing, and DMX control of UNI products. This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6 X 32. The output terminals are electronically isolated from the input & RDM through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Make: Philips / Signify / Equivalent |
| 35 | Supply & fixing of compact yet powerful show storage and playback device made of Polycarbonate material, capable of delivering light shows to installations with up to 340 unique light addresses. It is Easy to use - With factory preset shows, custom show-authoring capabilities, an intuitive LCD interface, removable SD card storage, and onboard light addressing features, Packaged with ColorPlay 3 light show authoring software - ColorPlay 3 which gives the flexibility to create and manage light shows using fully customizable effects, multi-track editing, timeline layering, and transition styles. It supports the optional AuxBox expansion device - AuxBox automatically triggers up to eight iPlayer 3 light shows using any remote triggering device with a dry-contact closure. It has got two DMX output ports, each controlling a universe of 512 DMX channels with input voltage range of 100 - 240 VAC. Make & Model: Philips iPlayer 3 / Equivalent |
| 36 | Supply & installation 4 Pole 4 Module 40 KA 1.4 KV Voltage Surge Protector confirms to IEC/EN 61643-11. Makes : Legrand / Siemens / G.E / L&T / Hager / Havells |
| 37 | Supply and laying of Cat 6 cable for passage of communication between the fixtures and the controllers. Make : DLINK / Equivalent |
| 38 | supply and fixing of 40 to 63 Amp TP MCBs 10 KA breaking capacity 'C'/ 'D' Curve ISI Mark as per IS:60898-1:2002 in the existing board and giving necessary connections.Grade-A: Makes: Legrand DX3 / Schneider-Acti9 / Hager - Novello+ / Seimens / Havells STADx / L&T- Newrang / Indoasian (Opti pro). |
| 39 | Supply and fixing of 12way SP & N Distribution board as per IS:13032 wi th IP-43 protection (Metal door) firm ly on the surface of the wall etc., co mplete. |
| 40 | Supply and run of 3 core 2.5 Sq mm PVC insulated & sheathed FRLS copp er round cable for voltage up to 11 00V as per IS694/1990 specification in the existing PVC pipe / PVC Trun king for mains including all labour ch arges etc., complete. |
| 41 | Supply and laying of 25 mm PVC conduit Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysJul 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender