Water Resources and Irrigation Government Departments Closing in 6 days TDR #56314614

Tender For Construction Of 5000 Glns Reinforced Cement Concrete Gsr At Mohra Duptra Of Pyt. Neel A And Construction Of 3000Gln Gsr At Mohra Khazana Of Pyt Bohardar A Under District Capex Budget For The Year 2026-27

Issued by Government Departments · Doda, Jammu and Kashmir
Tender Value
7.97 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
6 days left
EMD
15940
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Doda → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of 5000 Glns Reinforced Cement Concrete Gsr At Mohra Duptra Of Pyt. Neel A And Construction Of 3000Gln Gsr At Mohra Khazana Of Pyt Bohardar A Under District Capex Budget For The Year 2026-27

BOQ

Name of Work:- Construction of 5000 Glns RCC GSR at Mohra Duptra of Pyt. NEEL A and Construction of 3000Gln GSR at Mohra Khazana of Pyt Bohardar A under District Capex Budget for the year 2026-27
Sl. No. Item Description
1Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :
2Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
3Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level
4Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works above plinth level upto floor V level
5Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
6Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
7Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level TMT steel of grade Fe 500 or more
8Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
9Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.
10Centering and shuttering including strutting, propping etc. and removal of form for:Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
11Extra for shuttering in circular work 20%
12Centering and shuttering including strutting, propping etc. and removal of form for:Lintel, beams, plinth beams, girders, bressumers and cantilevers..
13Extra for shuttering in circular work 20%
14Arches, domes, vaults upto 6 m span .( for Shuttering on Extra for arches, domes, vaults (exceeding 6 m span shall be paid)
15Suspended floors, roofs, landings, balconies and access platforms.
16Edges of slabs and breaks in floors and walls Under 20 cm wide
1712mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 3 ( 1 cement : 3 coarse sand)
18Extra for plastering on circular works
19Providing & Incorporating during concreting GP sheet stripe water seal 1.25mm (nominal thick) at construction joints including jointing of hence so as to form a continuous barrier, strips area (excluding laps) to be measured 20cm in width.
20Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
21Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
22Providing and fixing plain PVC Bends (ISI) of required degree 110 mm dia (LMR)
23Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works
24Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces (Manhole Cover)
25Welding, including transportation of plant at site etc. complete By gas plant
26Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. , lead upto 50 m and lift upto 1.5 m.
27Providing Laying and Fitting of G.I Pipes for outlet, inlet , washout 32mm
28Carriage of cement from divisional store Ramban to site of work for an av. distance of 3000 m by Manual means.
29Carriage of steel from divisional store Ramban to site of work for an av. distance of 3000 m by Manual means.
30Carriage of Sand from nearest Source (as approved by Engineer in Charge)to road side by Mechanical Transport to site of work including cost for loading ,unloading & stacking for an av. distance of Average 130 Km Mechanical Transport and 3000 m by Manual means.
31Carriage of Stone Aggregate 20mm nominal size from nearest Source (as approved by Engineer in Charge)to road side by Mechanical Transport to site of work including cost for loading ,unloading & stacking for an av. distance of Average 60 Km Mechanical Transport and 3000 m by Manual means.
32Carriage of stone aggregate (Crushed) upto 40 mm by Manual mean from Road side (to be identified by engineer in charge) to site of work for an av. 1000 m by Manual means. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56314614
AUTHORITY Government Departments
TENDER VALUE 7.97 Lakhs
LAST DATE 20-07-2026
Authority
Authority Name Irrigation And Flood Control Department
Work Description Tender for Construction Of 5000 Glns Reinforced Cement Concrete Gsr At Mohra Duptra Of Pyt. Neel A And Construction Of 3000Gln Gsr At Mohra Khazana Of Pyt Bohardar A Under District Capex Budget For The Year 2026-27
Basic Detail
Tender No e-NIT No. 13 of 2026-27
Bidding Type Tender
Location
City Doda
State Jammu and Kashmir
Key Dates
Publish Date 06 Jul 2026
Submission Date 20 Jul 2026
Open Date 21 Jul 2026
Finance
Tender Value 7.97 Lakhs
Tender Fee 500
EMD 15940
Exemption Available
Document List
BOQ_1018560.xls
d562e6c8-4f53-4c9e-915b-ce79a885ae22.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 06, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Jul 21, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1018560.xls

html

d562e6c8-4f53-4c9e-915b-ce79a885ae22.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders