Tender For Water Supply Scheme Dawar Khandiyal (Balance Work)
Tender Value
1.52 Crore
Estimated cost
Bid Submission
20 Jul 2026
6 days left
EMD
3.04 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Water Supply Scheme Dawar Khandiyal (Balance Work)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (All kinds of soil). |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 3 | Ordinary Rock. |
| 4 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in.All kinds of soil. |
| 5 | Ordinary Rock |
| 6 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 7 | Supplying and filling in plinth with stone soling under floors including watering, ramming, consolidating and dressing complete. |
| 8 | Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing, ramming, all leads lifts and all carriages complete. |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 11 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 12 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 15 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately. All works upto plinth level |
| 16 | All works above plinth level upto floor V level |
| 17 | Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately. Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum) |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 19 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 20 | Suspended floors, roofs, landings, balconies and access platforms. |
| 21 | Edges of slabs and breaks in floors and walls |
| 22 | Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement) |
| 23 | Steel reinforcement for R.C.C. work ready to use \\"cut and bend\\" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 24 | Structural Steel in single section including cost of hoisting welding cutting etc icluding cost of red oxide and synthetic paint complete(Railing/Grill etc) |
| 25 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 26 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angles 40x40x6mm for diagonal braces. |
| 27 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. M.S. tube |
| 28 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 29 | 12 mm thick cement plaster of 1:6 mix ( 1 cement: 6 coarse sand) on walls etc incl all carriages, complete job. |
| 30 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. |
| 31 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood): |
| 32 | Painting with oil type wood preservative of approved brand and manufacture on New work (two or more coats) : |
| 33 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm). |
| 34 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete. On steel work |
| 35 | On concrete work |
| 36 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer. |
| 37 | Providing & fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete job as directed by Engineer-in-charge. |
| 38 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work). 150mm Dia GI (Medium) Class). |
| 39 | 100mm Dia GI (Light Class) |
| 40 | 80mm Dia GI (Light Class). |
| 41 | 65mm Dia GI (Light Class) |
| 42 | 50mm Dia GI (Light Class) |
| 43 | 40mm Dia GI (Light Class) |
| 44 | 25mm Dia GI (Light Class) |
| 45 | 20mm Dia GI (Light Class) |
| 46 | 15mm Dia GI (Light Class) |
| 47 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes and Earth work.Complete 65mm Dia GI |
| 48 | 25mm Dia GI. |
| 49 | 20mm Dia GI |
| 50 | Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job. 150 mm Dia GI |
| 51 | 100 mm Dia GI |
| 52 | 80 mm Dia GI. |
| 53 | Making connection of G.I. distribution branch with G.I. main offollowing sizes by providing and fixing Tee, including cutting andthreading the pipe etc. complete. 25 to 40 mm nominal bore. |
| 54 | 50 to 80 mm nominal bore. |
| 55 | Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments. 150mm Dia |
| 56 | 80mm Dia |
| 57 | Providing and Fixing of Pipe Specials incl. Tees, Elbows, Bends, Reducers, Gate Valves and Bib Cocks, complete job. (To be paid as per actual). |
| 58 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet. |
| 59 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area 40 sqcm. and above. |
| 60 | Taking out doors,windows and clerestory window shutters(steel or wood)incl.stacking within 50mm mtrs.lead.Of area of 3 sqm.and below. |
| 61 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Upto 10 mm thick |
| 62 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or equivalent. |
| 63 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 64 | Providing wood work in frames of door windows clestory windows and other frame wrought framed and fixed in position with hold flat lugs or with dash fastever of required diameter and length Including cost of holdfast lugs or dash fastens s ist class kail wood i/c all carriage complete. |
| 65 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including p/f of panelling of prelaminate Board for doors and 4mm glass panes for windiow panes including all almunium fittings and fixtures all complete as per direction of Engineer-in-charge.imcluding cost of priming coat and two or more coats of synthetic enamel complete job(Ist Class Kail Wood)-Cost of required number of Hold fasts included. |
| 66 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge uding cost of priming coat and two or more coats of synthetic enamel complete job:(Ist Class Kail Wood). |
| 67 | Providing of glass panes, with putty or Nails complete job : Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm) . |
| 68 | Brick work class designation 75 in foundation and plinth in cement mortar 1:4 ( 1 cement: 4 coarse sand): |
| 69 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 70 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 71 | P/F of GT Sheets panelling type(0.40mm Thick) in soffits including cost of framework (2\\" x 2\\" of ist class imported kail wood) including cost of nails etc complete job. |
| 72 | P/F of GT Colored Eaves Boarding 300mm wide & 0.50mm thick. |
| 73 | Providing and Fixing WARDROBES (60 cm deep) including 18mm Plywood All around, including Shelves and 12mm Ply for back Side Inner Area Finished With Liner, Outer Face of Shutters with Mica Finishing (1 mm), Concealed Cabinet Hinges, Cabinet Handles, Magnetic Catcher, 19mm Ply To Ply For Shutters, Hanger Rod, Drawer Locks, Mica Beading etc. of approved Brands with necessary fittings all complete as per direction of Engineer in Charge. |
| 74 | Providing and Fixing Modular Kitchen (HDHMR) including Bottle Pullout Basket, Plain Basket, Cutlery Basket, Thali Basket, Dish Rack (SS), Channels, Hinges etc. of approved Brands with necessary fittings all complete as per direction of Engineer in Charge. (front area to be measured only). |
| 75 | Providing and laying gang saw(18mm thick) cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. |
| 76 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 77 | Providing and fixing Ceramic glazed floor tiles (anti-skid) 30cmx30cm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARIA or equivalent make in color such as white, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 78 | Dry random rubble masonry with hard stone in foundation and plinth Without bond stone. |
| 79 | Constructing brick masonry manhole with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand), RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), 200mm thick foundation concrete 1:4:8 mix (1 cement : 4 coarse sand; 8 graded stone aggregate 40mm nominal size), inside and outside plastering 12mm thick with cement mortar 1:3 (1 cement:3 coarse sand), finished with a floating coat of neat cement inside and rough plaster on outside and making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20mm nominal size), neatly finished complete as per standard design including excavation, refilling and disposal of surplus earth. Inside size 90x90cms and 60cms deep. |
| 80 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) \\"manually contro(led device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C. pan of size 580X440 mm. |
| 81 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 82 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040mm bowl depth 250mm |
| 83 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge.(internal work Concealed). 32 mm dia. nominal bore |
| 84 | 25 mm dia. nominal bore |
| 85 | 20 mm dia. nominal bore |
| 86 | 16 mm dia. nominal bore |
| 87 | Providing and fixing of PVC pipes of approved make and brand including all fixtures complete job. 100mm Dia |
| 88 | 75mm Dia |
| 89 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 of approved make and brand(Jaguar/Hindware). |
| 90 | Providing and fixing 15 mm nominal bore C.P. brass mixer of approved quality conforming to IS : 8931 of approved make and brand(Jaguar/Hindware). |
| 91 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 92 | providing and fixing 50 L gyser of approved brand , inlcuding all fixtures complete job(Venus/Jaguar). |
| 93 | Providing and fixing angle valve of approved quality conforming to IS : 8931 of approved make and brand(Jaguar/Hindware). |
| 94 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 95 | Supplying installing and commisioning of Electric points of approved make and brand including cost of switches, mcbs wires etc all fittings and fixtures complete job. Lighting Point |
| 96 | Heating Point |
| 97 | Fan Point etc |
| 98 | Exhaust Fan complete with points |
| 99 | Supplying, Providing and Laying Fittings of Hamam Stone Flooring (Having Heat Retaining Properties, Kashmiri Devri Hamam Stones) complete job including all works related bottom supports etc complete job including all lead and carriage, complete job. |
| 100 | Supplying testing installing and commisioning of Luminous Invertor and Battery Combo(optimus 2800 Pure sine Wave 2500VA invertor with red Charge RC 18000 tall Tubular 260Ah battery - 2Batteries ) including Voltage stabilizer of 10KVA, Complete job. |
| 101 | Carriage of Dismantled material retreived after dismantling of the Existing Old Quarter from work site to Divisional Store or as per the Directions of Engineer In Charge. |
| 102 | Supplying testing installing and commisioning of 1Hp motor including all necessary fittings and fixtures (Usha/Crompton) (Motor for lifting Water). |
| 103 | Carriage of materials from divisional store/source to actual site of work by mechanical transport including loading ,unloading and stacking,complete. GI Pipes. Avg lead 20kms. 150 mm Dia GI Pipe |
| 104 | 100 mm Dia GI Pipe Avg lead 20kms. |
| 105 | Below 100mm Dia GI Pipes Avg lead 20kms. |
| 106 | Carriage of materials by mechanical transport including loading, unloading, stacking of materials – SAND/Agg(below 40mm nominal size): Avg lead 150 Kms. |
| 107 | Aggregate 40mm and above : Avg lead 20 Kms. |
| 108 | Cement/Steel: Avg lead 90 Kms. |
| 109 | Bricks Avg.lead 180Kms |
| 110 | CARRIAGE OF MATERIALSBy Manual Labour including loading, unloading and stacking . (Avg Lead 1000 Mtrs. SAND/Agg(below 40mm nominal size. |
| 111 | Stone aggregate 40 mm nominal size and above(Avg Lead 1000 Mtrs.) |
| 112 | Cement(Avg Lead 1000 Mtrs.) |
| 113 | Steel (Avg Lead 1000 Mtrs.) |
| 114 | Providing/ Fixing, installation, successful commissioning of double flanged MS pipes/specials to be fabricated from MS tube heavy quality nominal thickness 6mm, conforming to relevant Indian Standard IS-1239 and/or IS 1161 read with up to date amendments. The pipe material should be of standard quality and must withstand all the anticipated design pressure ratings.The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender