Tender For Upgradation Of Panchayat Ghar Lasjan B By Way Of Panelling And Other Miscellianeous Works At Lasjan B
Tender Value
15 Lakhs
Estimated cost
Bid Submission
15 Jul 2026
2 days left
EMD
30000
Bank guarantee accepted
Document Fee
900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Panchayat Ghar Lasjan B By Way Of Panelling And Other Miscellianeous Works At Lasjan B
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 3 | Providing, laying, dry stone soling hand packed including ramming and compacting with hand rammers also including carriage of all materials involved complete job. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4coarse sand : 8graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering (Using Concrete Vibrator for Compaction of Concrete). All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) nallah aggregate . |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 7 | P/A 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 fine sand) |
| 8 | Structural steel built up section for frame work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
| 9 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of : G.S. Sheet |
| 10 | C.G.I. SHEETS ROOFING Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 11 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 12 | Renewing glass panes, with wooden fillets wherever necessary thickness 4.0 mm |
| 13 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 30mm |
| 14 | Applying a coat of mordant solution on G.S. sheets: With a solution of 38gms of copper acetate in liter of soft water |
| 15 | Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution by mechanical means |
| 16 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Ordinary cement without any pigment. |
| 17 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 18 | Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm) |
| 19 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 20 | Providing & fixing in position T&G Panelling of 10mm-12mm thickness , moulded planks and grove to fit in panels (incl. framework of 12 mm thick ply board underneath fixed with steel nails, wood adhesive etc) The panels shall have profiled interlocking system locked in place and by approved design and shape/ profile as per direction & in all respects complete as per direction of the Engineer in-charge. |
| 21 | Providing and fixing of 50mm wide ornamental cornice of class imported kail wood i/c cost of screws/nails complete in all respects. |
| 22 | Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work including a coat of wood filler |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 24 | POINTING ON STONE WORK Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing |
| 25 | Varnishing with varnish of approved brand and manufacture: Two or more coats of glue sizing with copal varnish over and under coat of flatting varnish |
| 26 | P/f CP fittings i/c all nessary fittings complete bib cock 1/2'' |
| 27 | Angle valv |
| 28 | foam insulation |
| 29 | P/fixing of 1 hp water motor i/c all necessary fittings & fixtures ie plumbing and electric fitting complete job |
| 30 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 20 mm dia. nominal bore |
| 31 | Providing and fixing 15cm wide 45 cm overall semi circular/ square plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 32 | Providing flat iron brackets 50 x 3 mm size with necessary bolts, nuts and washers etc. for fixing asbestos cement/ G.S. sheets gutters with purlins. |
| 33 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 75 mm diametre |
| 34 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler 75 mm |
| 35 | Single push fit coupler 75 mm |
| 36 | bend 87.5 Deg--75mm bend |
| 37 | shoe(plain) 75mm |
| 38 | Single tee without door (75 x75x75 mm) |
| 39 | Dry random rubble masonry with hard stone in foundation and plinth: |
| 40 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per meter cost of total length of barbed wire used With G.I. barbed wire |
| 41 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead Upto 10 mm thick |
| 42 | Providing and fixing 10 mm thick of specified medium density board, pre-laminated one side decorative lamination i/c cost of cornice 50mm and i/c cost wooden frame of 2 X 2 feet i/c cost of wooden frame work of budloo wood (complete job) |
| 43 | Providing and fixing 12 mm thick of ply board |
| 44 | Providing and fixing of KHATAM BANDI ceiling (Paanch Murab)of first class budloo/fir wood excluding the cost of frame work which is to be paid separately. & in all respects complete as per direction of the Engineer in-charge. |
| 45 | P/f of manual vertical ventilation Blinds for windows i/c cost all necessary fittings carriages complete job |
| 46 | Fabraction/Making of Wardrobe of 19 mm thick pre laminated ply boards both sides or in all surfaces 0.8mm delmica (inner and Outer) incld shelves at required level with 12mm thick ply board on back side and 19 mm thick shutters laminated ply board shutters fixed, D-beading on exposed edge and 75mm thick wooden Cornis on exposed edges incld. all necessary hardware fitting complete job (2'-0\\" deep). |
| 47 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. 18.10.1 White glazed fire clay kitchen sink of size 600x450x250 mm |
| 48 | P/F Sanitary fitting and fixtures of ISO approved brand and make and i/c cost carriages in all respects Sink mixer |
| 49 | Angle valve |
| 50 | Towel Rod |
| 51 | Soap case |
| 52 | PVC connection |
| 53 | P/F and installation of 15 ltr of ISI approved brand and make and i/c thermal cutt off heating element copper tank and i/c bolts, all necessary fitting and fixtures complete job |
| 54 | Add for provision of electrical accessories (the estimate duly vetted by JE Electrical) |
| 55 | Add provision for cost of signboard photographs Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 06, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender