Tender For Creation Of Additional Accommodation By Way Of Renovation Of Old Store Room In The Div Office For Official Use By Sub Division Officer At Machinery Division Jammu
Tender Value
3.02 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
6 days left
EMD
6060
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Creation Of Additional Accommodation By Way Of Renovation Of Old Store Room In The Div Office For Official Use By Sub Division Officer At Machinery Division Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Shifting of old record from record from old store room in M&HED Complex to newly created record room at backside of M&HED Complex by way of employing labour and filling files/record in gunny bags and then shifting to newly created record room and placing it properly on racks The complete job includes material cost , labour cost and taxes |
| 2 | Dismantling of RCC three number Shelf of size 40’-0”x2’-0”x0’-4” by employing skilled labour for dismantling with the help of hilt and other tools and tackle required including disposal of material within 50mtr lead and then beyond municipal limit. The complete job includes material cost , labour cost, tools and tackle cost and taxes |
| 3 | Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminum primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) T-sections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primerTotal= 26.58 m2 |
| 4 | Providing and laying of floor Tile of size 4’-0”x0’-6” on floor to be laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete The color, and design of the panel shall be approved by Engineer in charge. The job is inclusive of material cost, labour cost and all kinds of taxes Room SIZE =285.00 ft2, Skirting=35ft2 Total= 320 ft2 |
| 5 | Providing and fixing of wallTile of size 4’-0”x0’-6” of Standard quality on the walls. The Plank Tile is fixed with chemical on walls. The color, material and design of the panel shall be approved by Engineer in charge. The job is inclusive of material cost, labour cost and all kinds of taxesTOTAL = 594 ft2 |
| 6 | Providing and fitting of new door in new Sub Divisional room by way of dismantling of old damaged door along with fixtures and accessories and providing and fitting of new door made out of HDMR Board 35mm thick of size 3’-6”x6’-6” and fix it with 1mm thick mica sheet on both sides with the help of fevicol, Heatex and tape.Job also includes repair to chowkatt by way of fixing board and 12mm ply on already fixed iron frame followed by mica sheet on both sides with the help of fevicol, Heatex and tape of size 16’-6”x0’4”x0’x11” including providing and fitting door accessories like handle, door close hinges, nails, door latch. The job includes cost of material, labour and taxes. |
| 7 | Providing and Fixing Blinds in the newly created Sub Divisional Room of size 3x (7’-0”x4’-0”) made out of HDPE waterproof fabric cloth with control chain or cord for smooth raising and lowering to be fitted with L Bracket and expansion screws for mounting of blinds The job includes cost of material, labour charges and taxes. |
| 8 | Electrification of new created Sub Divisional office by way of Providing and fitting of modular08 switches(6A), 01Socket(6A),06Socket with switch(15A), 02Fan regulator ,steel box, sheet 02Fan (1200mm), 04 Round led light(24w),01 panel light of size 2x2ft(36w)shifting of including providing and laying new 4smm and 2sqmm PVC wire and providing and fitting of already switches, socket, regulator, sheet and box. The job includes cost of material, labour and taxes |
| 9 | Providing and fitting of window Air conditioner in newly created room of Sub-Division of capacity 1.5 ton having 5 star BEE rating and copper wounded including p/f of 5 Kva copper voltage stabilizer (90V-270V) wall hanging type with 32A TPN along with dismantling of Aluminium frame for fitment of AC by cutting the frame into proper size and refitment of same. The job includes cost of material, labour and taxes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender