Tender For Construction of Chawki Rearing Centre (Crc) Chogalpora Dh Pora .Block:-Manzgam
Tender Value
20 Lakhs
Estimated cost
Bid Submission
23 Jul 2026
14 days left
EMD
60000
Bank guarantee accepted
Document Fee
1200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kulgam → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction of Chawki Rearing Centre (Crc) Chogalpora Dh Pora .Block:-Manzgam
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:2.9.1 All kinds of soil : |
| 2 | P/L stone solling hand packed including all leads.complete job. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Providing and laying in position reinforced cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Steel for RCC work including cutting, bending,binding and placing in position all complete. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.1 Foundations, footings, bases for columns. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form work for:4.6.2 Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form work for:Suspended floors etc. |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand). |
| 12 | 12mm thick cement sand plaster (1:4)mix. |
| 13 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 14 | P/L 50mm thick cement concrete flooring (1:2:4)mix. |
| 15 | P/F 40*5mm Flat iron Hold fast 40cm long with all fixtures. |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Foreign Kail wood. |
| 17 | Providing and fixing 30mm glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 18 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.9.21.1 With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. |
| 19 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : |
| 20 | P/F glass panes in windows 3.5mm thick with all fixtures. |
| 21 | P/F ISI marked almunium fittings of approved Quality complete job.150mm Tower Bolt. |
| 22 | 100mm Tower Bolt |
| 23 | AI Drop Lock |
| 24 | Simple AI Drop |
| 25 | 125mm Handle |
| 26 | 100mm Handle |
| 27 | P/F MS GRILL of required Pattern Fixed to openings with Rawl Plugs screws etc with all fixtures and a priming Coat. |
| 28 | P/F structural steel welded in built up sections trusses and framed work including a priming coat.complete job. |
| 29 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 30 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 31 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade |
| 32 | Applying priming coat:13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 34 | Providing and fixing 1st quality ceramic glazed Floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 35 | Providing and fixing 1st quality ceramic glazed Wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 36 | P/F 20mm thick wooden Planks ceiling (frame work for base to be paid separately) with M.S screws popular wood. |
| 37 | P/F PVC (prince make) pipes including all fittings.100mm Dia PVC pipes. |
| 38 | 75mm Dia PVC Pipes |
| 39 | Providing and fixing of PPR pipes and pipe fittings to walls cilings Floors including caste of pipe heavy grade with climps. |
| 40 | Providing and fixing of Indian type WC Pan 530mm size White colour(Hindustan make) with 10.5 liter PVC cistern. including C/O Cement work and CP long Band. |
| 41 | P/F White vitreous China wash Basin With Pedestal complete job. |
| 42 | Providing and fixing in positions PVC water storage Tank with lockable cover including cost & carriage up to site of work including staging. |
| 43 | Providing and fixing of CP fittings of approved brand and manufacture .CP angle valve. |
| 44 | CP Wall mixer |
| 45 | CP Basin Mixer |
| 46 | CP Soap Case |
| 47 | CP Grating |
| 48 | PVC Connections |
| 49 | Looking Mirror with PVC Frame |
| 50 | CP Towel Rod |
| 51 | 15mm Dia CP Bib Cock |
| 52 | P/F Stop Cock/Gate Valve |
| 53 | P/F Waste Pipe/Vent Pipe |
| 54 | P/F 30Litre capacity Geyser with all fixtures. |
| 55 | Providing and laying of PVC conduit pipes 25 mm dia of approved quality in slab and walls including all bends/ Concealed light boxes, switch boxes and and fan boxes and Provision for wooden cornice with nails and provision for polyrhene sheet and chicken wire mesh for floors. Complete Job |
| 56 | Carriage of Sannd aggregates by MT. |
| 57 | Carriage of Bricks by MT. |
| 58 | photograph /signboard charges(2.5X2.5)size Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender