Tender For Imp/Upgradation Of Road From Gawkadal To Nai Sarak & Habbakadal To Fateh Kadal B.W.O 50Mm Bm, In Stretches & 25Mm Sd & 6Mmm Seal Coat.(Adv. Cost Rs. 58.06 Lacs) (Incl Cost Of Material+Gst)
Tender Value
58.06 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
3 days left
EMD
1.16 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Imp/Upgradation Of Road From Gawkadal To Nai Sarak & Habbakadal To Fateh Kadal B.W.O 50Mm Bm, In Stretches & 25Mm Sd & 6Mmm Seal Coat.(Adv. Cost Rs. 58.06 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth all kinds of soil anddisposal of surplus excavated earth as directed, within a lead of 50 metres:including carriagr of surplus excavated material beyond munciple limits upto carriage15km |
| 2 | Supply,and stacking of 2nd class sand/dust incl spreading, handramming,watering and carriage of material from source to site of work complete job. |
| 3 | Providing and laying, watering and compacting with (80 - 100 KN) roller i.e Nallah muck (GSB) with aggregate size not exceeding 90mm granular sub-base material to specified lines, grades X sec and density furnished work to be measured. Incl carriage complete. |
| 4 | Supplying,stacking and Laying of WBM Grade II with graded stone aggregate at site of size 63-45mm size, (quarry Woyen), stone screenings, chippings, 13.2 mm nominal size (Type-A) & moorum (stonedust) including spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density including carriage of all material involved with loading unloading and stacking complete all as directed by Engineer-Incharge with average lead 20 km. |
| 5 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mixacadam (WMM) specification including premixing the aterial with water at OMC in mechanical mix plant,c arriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical aver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8to 10 tonne capacity to achieve the desired density, complete as per pecifications and directions of Engineer-in-Charge |
| 6 | Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). |
| 7 | Providing and applying tack coat using hot straight run bitumen of grade VG- 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications on (BT) |
| 8 | Providing and applying tack coat using hot straight run bitumen of grade VG- 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications on (WBM) |
| 9 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant/Drum type of required capacity including al carriages |
| 10 | Providing and laying semi- dense using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge 25 mm compacted thickness with bitumen of grade VG-10 @5% (percentage by weight of total mix)) prepared in Batch Type Hot Mix Plant/Drum type of required capacity including all carriages. |
| 11 | Providing/ Laying of 6mm thick compacted seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG - 10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing complete as per MORTH specifications and including cost and carriage of all materials involved from source up to the site of work complete. |
| 12 | Repairing of Existing Damaged Water supply pipeline of any type (GI/DI/HDPE upto 150 mm dia) including excavation in any soil bailing out water cutting off damaged portion ,Supplying and Fixing new pipe piece of suitable length with required specials/couplings making water tight joint testing and refilling of trench with proper ramming disposal of surplus material as directed complete in all respects. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender