Tender For Up-Gradation Of Path At Trc Kishtwar Under Capex Budget 2026-27 (New Work)
Tender Value
24.28 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
14 days left
EMD
48560
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up-Gradation Of Path At Trc Kishtwar Under Capex Budget 2026-27 (New Work)
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge: 15.2.1 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | 2.8 Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed: 2.8.1 All kinds of soil : |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.3 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1 Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | Providing and laying non-pressure of specified class R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement: 2 fine sand) including testing of joints etc. complete. 20.6.1 Non-pressure NP-3 class (Medium duty) R.C.C. pipes 20.6.1.1 450 mm dia. R.C.C. pipe |
| 7 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 16.94.1 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 8 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 9 | Providing and applying tack coat using hot straight run bitumen of grade – VG-30, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. 16.38.2 On bitumen surface @ 0.50 Kg/sqm. |
| 10 | 2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately). 16.41.1 With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. |
| 11 | Providing, fabricating, supplying, transporting and fixing decorative overhead entrance signage for \\"Tourist Reception Centre, Kishtwar\\" over existing RCC entrance pillars, comprising fabrication and erection of structural framework using MS Rectangular Hollow Sections (RHS) and Square Hollow Sections (SHS) of approved size and thickness, complete with cutting, welding, grinding, alignment, anchoring and fixing to existing RCC pillars through chemical anchor bolts, base plates and all necessary accessories. The work shall include providing and fixing 4 mm thick exterior grade stone-texture Aluminium Composite Panels (ACP) on both faces and exposed edges of the structure with approved aluminium cleats, screws and sealants, complete as required.The work shall further include design, fabrication and fixing of decorative mountain skyline and deodar tree motifs made from minimum 3 mm thick aluminium sheet/CNC laser-cut ACP, powder coated in approved shades, fixed over the top portion of the signboard to create a three-dimensional tourism-themed appearance.The item shall include providing and fixing fabricated 304 Grade stainless steel mirror-finish channel letters forming the words:TOURIST RECEPTION CENTRE KISHTWARLetters shall be minimum 50–75 mm deep, fabricated from 1.2 mm thick SS sheet with acrylic backing and warm-white LED halo illumination arrangement complete with LED modules, drivers, weatherproof housing, transformers, concealed wiring, connectors and accessories. The work shall also include providing concealed electrical wiring in PVC conduits, junction boxes, weatherproof fittings, connection to nearest power source, testing and commissioning of complete illumination system. The structural steel members shall be cleaned, treated with anti-corrosive zinc-rich primer and finished with two coats of synthetic enamel paint of approved shade before cladding. The item shall include all labour, lifting arrangements, scaffolding, transportation, loading, unloading, fixing hardware, anchor fasteners, sealants, testing, commissioning and all incidental works complete as directed by the Engineer-in-Charge. |
| 12 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.6 Columns, pillars, piers, abutments, posts and struts. |
| 15 | Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed 7.44.1 Fine chisel dressed |
| 16 | 13.100 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 17 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 18 | Supply Transportation and installation ornamental garden/park bench (3-seater type) made o decorative cast iron/mild steel frame with armrests and legs, fitted with seasoned hardwood/FRP Slats (25-32mm thick) for seating and backrest, finished with two coats of weatherproof paint/polish over anti-rusting primer, including all stainless-steel fasteners, fixing in position by gruting legs in cement concrete Block (1:2:4) mix of size 200x20x300 nnm complete in all respects including labour, material transport and taxes |
| 19 | Supply delivery and installation of a decorative steel pole with all associated materials and accessories. Decorative steel pole material mild steel powder coated finish, height 4 m diameter 100-150mm(Standard decorative design) weight approx 75-90kg, GI Earthig pipe 60mm x 3m (Earthing plate and clamp), Power cable copper conductor 2.5-4 sqmm Of approx length as required and armoured/unarmorured, PVC insullation suitable for outdoor use with Nuts, bolts, Brackets clamps, miniaturefuse, isolators, junction boxes, xonduit pipes, wirings etc including all labour, installation, transportation and handling complete in all respects as per direction of Engineer in Charge.(LMR) |
| 20 | Supply Delivery and installation of outdoor LED luminare of specifications power 50-100 W LED, IP65 raiting drivers included mounting brackets included complete in all respects as per directions of Engineer in charge |
| 21 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.3 Suspended floors, roofs, landings, balconies and access platforms. |
| 23 | Disposal of Mulba/Rubbish at an average distance of 05 Kms By MT |
| 24 | Disposal of Earth at an average distance of 05 Kms By MT |
| 25 | Carriage of sand at an average distance of 30 Kms By MT |
| 26 | Carriage of stone aggregates at an average distance of 07 Kms By MT |
| 27 | Carriage of stone aggregates above 40 mm at an average distance of 07 Kms By MT |
| 28 | Carriage of tiles/paver Block at an average 150 Km by MT |
| 29 | Carriage of devri stone at an average 210 Km by MT |
| 30 | Carriage of NP3 RCC Pipe at an average distance 210 Km by MT |
| 31 | Provision for foundation / inauguration stone as per direction of Engineer In-charge (Complete Job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender