Tender For Electrical Renovation Of Dingle Lodge At Dingle Estate, P.U. Shimla (H.P.)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
21 Jul 2026
9 days left
EMD
17500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Electrical Renovation Of Dingle Lodge At Dingle Estate, P.U. Shimla (H.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC casing & capping (Batton), with tumbler type switch made from fire-retardant Polycarbonate or Duroplast with brass terminals, suitable size wooden box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (N.S.) |
| 2 | Group A (N.S.) |
| 3 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in PVC casing & caping (Batton) as required. (N.S.) |
| 4 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire (N.S.) |
| 5 | Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (DSR 1.17) |
| 6 | 1 x 1.5 sq.mm (DSR 1.17.1) |
| 7 | 3 x 2.5 sq.mm (DSR 1.17.11) |
| 8 | 3 x 4 sq.mm (DSR 1.17.21) |
| 9 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (DSR 1.21) |
| 10 | 25mm (DSR Ref 1.21.2) |
| 11 | Supplying and fixing of following sizes of medium class PVC casing & capping (Batton) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (N.S.) |
| 12 | 20mm (N.S.) |
| 13 | 25mm (N.S.) |
| 14 | 32mm (N.S.) |
| 15 | 40mm (N.S.) |
| 16 | 50mm (N.S.) |
| 17 | Supplying and fixing following tumbler type switch/ socket made from fire-retardant Polycarbonate or Duroplast with brass terminals on the existing switch box/ cover including connections etc. as required. (N.S.) |
| 18 | 5/6 amps switch (N.S.) |
| 19 | 15/16 amp switch (N.S.) |
| 20 | 3 pin 5/6 amp socket outlet (N.S.) |
| 21 | 3 pin 15/16 amp socket outlet (N.S.) |
| 22 | Supplying and fixing of Wooden box of 180mm x 100mm x60mm deep (Nominal size) on surface including providing and fixing 3pin 5/6 amps socket outlet and 5/6 amps tumbler type switch made from fire-retardant Polycarbonate or Duroplast with brass terminals, connection painting etc. as required (For light plugs to be used in non residential buildings) (N.S.) |
| 23 | Supplying and fixing metal box of 200mm x100 mm x60mm deep (Nominal size) on surface including providing and fixing 6pin 5/6amps and 15/16 amps socket outlet and 15/16 amps tumbler type switch made from fire-retardant Polycarbonate or Duroplast with brass terminals , connection painting etc. as required (N.S.) |
| 24 | Supply and fixing 3 pin, 5 amp ceiling rose on the junction box/ wooden block including connection etc as required. (DSR Ref 1.33) |
| 25 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (DSR 2.4) |
| 26 | 6 way (4 + 18), Double door (DSR 2.4.2) |
| 27 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (DSR 2.10) |
| 28 | Single pole (DSR 2.10.1) |
| 29 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and Supply masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal/ coke and salt ) as required. (DSR 5.1) |
| 30 | Supply and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (DSR 5.18) |
| 31 | LED Flood light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt)Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -5 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC As per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM- 21-11 report, CCT 3000°K/4000°K/5700°K/6500°K(As per ANSBin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output .LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (DSR Ref 8.15) |
| 32 | 100 watt (DSR Ref 8.16.3) |
| 33 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required. (DSR 15.16) |
| 34 | 63 mm dia (OD-63 mm & ID-51 mm nominal) (DSR 15.16.1) |
| 35 | Supply and fixing of brass batten/ angle holder metal ring including wooden block & connections .complete in all respect to the entire satisfaction of EIC. (N.S.) |
| 36 | Supply, fixing, termination & testing of Ceilng fan 48\\" (1200mm sweep), 3 blades, 390 rpm white in color and connecting the same with nearest electric point, it includes the cost of fan rod arequired as per site. Complete in all respect to the entire satisfaction of Engineer-in-Charge. (N.S.) |
| 37 | Supply & erection of Hanging Light suspended from ceiling, installed on the wooden board, it includes the cost of 20Watt/23 Watt Lamp (color temperature 4000K, termination & other petty material required to complete the job. (The sample of light may got approved from the E.I.C. before installation at site) (N.S.) |
| 38 | Supply & erection of Spot Light 12 watt, 4K color temperature (black color outer finishing), installed on the wooden board, it includes the cost of termination & other petty material required to complete the job. (The sample of light may got approved from the E.I.C. before installation at site) (N.S.) |
| 39 | Supply & erection of Bed Light 7 watt/ 8 watt (brass finish) to be installed on the wooden board, it includes the cost of termination & other petty material required to complete the job. (The sample of light may got approved from the E.I.C. before installation at site) (N.S.) |
| 40 | Supply & erection of Mirror Light (brass finish) 12 Watt to be installed on the wooden board, it includes the cost of termination & other petty material required to complete the job. (The sample of light may got approved from the E.I.C. before installation at site) (N.S.) |
| 41 | Supply & erection of Picture Light (brass finish) 12 Watt to be installed on the wooden board, it includes the cost of termination & other petty material required to complete the job. (The sample of light may got approved from the E.I.C. before installation at site) (N.S.) |
| 42 | Supply & erection of 9 watt LED bulb on the holder, complete in all respect to the entire satisfaction of EIC. (N.S.) |
| 43 | Supply & erection of Table Light (10 watt Batton) to be installed on existing pelmet, it includes the cost of termination & other petty material required to complete the job. (The sample of light may got approved from the E.I.C. before installation at site) (N.S.) |
| 44 | Supply and erection of 63 amp MCB TPN, 10kA, 'C' curve, Complete in all respect to the entire satifaction of Engineer-in-Charge. (N.S.) |
| 45 | S/T/C/L of 16 Sqmm 4 core PVC insulated and PVC sheathed Aluminium armoured power cable of 1.1 KV grade to be laid in existing pipe or fixed on wall surface Clamped with 1mm thick Saddle. Complete in all respect to the satisfaction of E.I.C (N.S.) |
| 46 | Supply, fixing, termination & testing of Ind. exhaust fan 12\\" 900 rpm and connecting the same with nearest electric point, it also includes the cost of frame for exhaust fan made of 16 gauge MS sheet including cutting welding painting etc. on the existing steel glazing, it also includes the cost of louver made out of 18G/20G sheet for exhaust fan of size 12\\". Complete in all respect to the entire satisfaction of Engineer-in-Charge. (N.S.) |
| 47 | Supply and erection of 4 step fan regulator (old type) Complete in all respect to the entire satisfaction of Engineer-in-Charge. (N.S.) |
| 48 | S/E of non metalic ventilating exhaust fan of size 250mm with louver, complete in all respect to the entire satisfaction of EIC. (N.S.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender