Tender For Restoration Of Four Isolator Foundations Of Yard Settlement In The 22 Kv Yard And Other Miscellaneous Works At The 66/22 Kv Gis Baghipul Under Piu Bhabanagar, District Kinnaur (H.P.).
Tender Value
Ref. Documents
Estimated cost
Bid Submission
20 Jul 2026
15 days left
EMD
6700
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kinnaur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration Of Four Isolator Foundations Of Yard Settlement In The 22 Kv Yard And Other Miscellaneous Works At The 66/22 Kv Gis Baghipul Under Piu Bhabanagar, District Kinnaur (H.P.).
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 3 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (Item code 2.6.1, 2.7.1 & 2.7.3) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering : 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Stone filling behind retaining wall.Including carriage of material within all leads and lifts as per direction of Engineer-in-charge. |
| 7 | Providing weapholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing. |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 11 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat & Paint of approved brand all complete. |
| 12 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat & Paint of approved brand all complete. Material of existing gate |
| 13 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 14 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm |
| 15 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) |
| 16 | Providing and filling the gap between plastered wall surface and window frame with white cement based putty, 1 mm thick, complete, measured in running metre for a width of 0.10 m. |
| 17 | Providing and fixing 4 mm thick Aluminium Composite Panel (ACP) of approved make and colour, over existing cracks and around GIS duct/wall opening, fixed directly on existing sound surface without framework, using approved adhesive and mechanical fasteners, including cutting to required shape, sealing of all joints, edges and periphery with waterproof silicone/PU sealant to make the area watertight and prevent ingress of rainwater, dust and moisture, including all materials, labour, tools & tackles, complete as per direction of Engineer-in-Charge. |
| 18 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 19 | Providing and fixing complete cupboard including shutters 25 mm thick, made with pre-laminated flat pressed three layer particle board (IS: 12823), exterior grade (Grade I Type II), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping 25 mm × 12 mm, necessary screws, bright finished stainless steel piano hinges, and all fittings, complete as per direction of Engineer-in-Charge. |
| 20 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. |
| 21 | Dismantling and re-erection of existing 22 kV isolator complete with earth switch including operating mechanism, operating rod, jumper connection, alignment, testing and commissioning complete in all respects at 66/22 kV Substation as directed by the Engineer-in-Charge. 0.0 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender