Tender For Repairs To Firing Range, Obstacle Course, Training Shed, Hard Standing, Pathways Etc At installation Chilka Under Ge Chilka
Tender Value
20 Lakhs
Estimated cost
Bid Submission
24 Jul 2026
9 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs To Firing Range, Obstacle Course, Training Shed, Hard Standing, Pathways Etc At installation Chilka Under Ge Chilka
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER CHILKA, INS CHILKA, KHURDA, ODISHA - 752 037 Name Of Work : REPAIRS TO FIRING RANGE, OBSTACLE COURSE, TRAINING SHED, HARD STANDING, PATHWAYS ETC AT INS CHILKA UNDER GE CHILKA Contract No : GE/CHL/8207 OF 2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc. (including tiles) raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and directed. |
| 3 | M & L 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces mixed with water proofing compound 200ml per 50 kg weight of cement rendering finished even and smooth without using extra cement complete all as specified and directed.Note : Water proofing compound shall be measured and paid separately. |
| 4 | M&L for rendering 15mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6, including finishing even and smooth without using extra cement complete all as specified and as directed. |
| 5 | Supply only water proofing liquid of approved make |
| 6 | M&L for preparation of new plastered external wall surfaces of any description over 10 cm width/girth and weather coat anti dust emulsion paint, exterior grade of approved shade over a coat of alkali guard anti efflorescence primer as per manufacturer's instruction complete all as specified and as directed. |
| 7 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying three coat white wash complete all as specified and directed. |
| 8 | M&L for preparation of old plastered decorated surfaces of external wall by brooming down or steel wire brushing, scraping down smoke soot, moulds, moss and efflorescencent salts and trading oil and greasy spots of any description over 10 cm width/girth and including applying one coat of weather coat anti dust emulsion paint, exterior grade of approved shade as per manufacturer's instruction and also rewrite the bldg No as per existing font style and size with enamel paint of approved shade complete all as specified and as directed |
| 9 | Demolition of brick work/stone masonry built in cement mortar and removal of rubbish from site complete all as specified and directed. |
| 10 | M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified. |
| 11 | M & L for walling of random rubble masoney, uncoursed , well bonded bedded and solidly hearted , built in cm 1:6 complete all as specified |
| 12 | M & L for walling of random rubble , uncoursed , well bonded bedded and solidly hearted , built in cm 1:6 except stone complete all as specified.Note : Serviceable RR stones from demolition shall be reused. |
| 13 | M&L for rendering 15mm thick on fair faces of brick or concrete sufaces in cement mortar 1:4, including finishing even and fair with using extra cement complete all as specified and as directed. |
| 14 | M & L for flush pointing to random rubble masonry uncoursed or brought upto courses in CM (1:4) complete all as specified and directed. |
| 15 | Demolition of cement concrete unreinforced in ground floors andpavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 16 | M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in as in floors, hardstanding laid in alternate bays ( n exc. 4 Sqm each) and finished even and fair( without using extra cement) complete all as specified and directed. |
| 17 | M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring, Path finished even and fair (without using extra cement ) complete all as specified and directed by Engr in Charge. |
| 18 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand as specified and directed by Engr in Charge. |
| 19 | M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping including necceesry form work complete |
| 20 | S&F in repair plain mild steel wire galvanised class 3 (dia of wire 4mm) in fencing/cloth line with pvc coated including straining and fixing to steel post and to straining bolts, including securing with and provision of galvanised iron tying wire or staples or steel pins etc including removing of old wire complete all as specified and directed. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engr-in -charge. |
| 22 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over cement screed 15 mm thick in CM 1:6 complete all as specified and as directed. |
| 23 | Dismantling structural steel work including doors, gates etc complete all as specified. |
| 24 | M&L for Framed work such as grills, gratings, hold fasts etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290-0(Gde-E-165), complete all as specified. |
| 25 | Dismantling wrought iron or mild steel work of any Description not otherwise provided for complete all as specified and as directed. |
| 26 | S&F Welded steel wire fabric supplied and fixed complete to wood or steel members weight per Square meter n exc 4 kg . |
| 27 | M & L for preparing new steel surfaces of any description over 10 cm girth and width and applying two coat of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified. |
| 28 | M & L for preparing old painted steel surfaces of any description over 10 cm girth and width and applying one coat of synthetic enamel paint complete all as specified. |
| 29 | M&L complete removal of existing treatment of old decorated wall surfaces of static water tank and including applying two coats of Latex shield 2K to be applied @ 1.8 Kg per Sqm per coat by masonry brush or an appropriate power spray equipment complete all as specified and directed. Make:Berger(Tankshield PW) |
| 30 | Demolition of cement concrete( reinforced ) of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 50m from site all as directed |
| 31 | M&L RCC precast cover slab type B1 1:2:4 using 20 mm graded aggregate set in CM 1:4 etc incl necessary form work complete all as specified |
| 32 | M&L for RCC (nomial mix) type B1 1:2:4 with using 20mm graded stone agg )as in Walls, retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilaster and buttresses |
| 33 | Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter all as directed by Engr-in-Charge. |
| 34 | S&F mild steel TMT bars 10 mm dia and over ,cut to length , bent to shape requred, including cranking , bending spirally hooking for slabs ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 35 | M & L for Mild steel TMT bar 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. |
| 36 | Excavating over areas, n exc 1.5m deep & getting out in soft / loose soil |
| 37 | Screening of material on site of the work (Material obatined from Item No. 35) as per directed by Engr-in-Charge.Note:- Shells retained during the screening shall be returned to SO Works |
| 38 | Returning, filling in, including spreading, levelling, watering & well ramming( in layers n. exc 25 cm in soft and loose soil. |
| 39 | Removing excavated soil (retained material from item No 36) exc. 50m but n exc 100m & depositing where as directed at a level n exc. 1.5 m above the starting point. |
| 40 | Supply only Sand for filling under floors as approved by Engr-in-Charge. |
| 41 | Supply only saw dust as approved by Engr-in-Charge |
| 42 | Labour only for mixing of sand and saw dust in equal prortions and laying the same over the sloped portion of shooting range complete all as specified and directed. |
| 43 | M&L for cleaning of all scales and dirt from RCC UG tanks and from mouths of inlet pipes of capacity exceeding 65000 ltrs and not exceeding 70000 ltrs capacity including writing letters or figures (block Roman/Italic or Indian ) of 7.5 cm height but not exceeding 30 cm to write as cleaned XX-XX-XX on each tank and writing stoops, comma, short lines, dashes, hyphens, brackets complete all as specified and as directed. |
| 44 | M&L for cleaning of all scales and dirt from RCC UG tanks and from mouths of inlet pipes of capacity exceeding 70000 ltrs and not exceeding 75000 ltrs capacity including writing letters or figures (block Roman/Italic or Indian ) of 7.5 cm height but not exceeding 30 cm to write as cleaned XX-XX-XX on each tank and writing stoops, comma, short lines, dashes, hyphens, brackets complete all as specified and as directed. |
| 45 | M&L for cleaning of all scales and dirt from RCC UG tanks and from mouths of inlet pipes of capacity exceeding 80000 ltrs and not exceeding 85000 ltrs capacity including writing letters or figures (block Roman/Italic or Indian ) of 7.5 cm height but not exceeding 30 cm to write as cleaned XX-XX-XX on each tank and writing stoops, comma, short lines, dashes, hyphens, brackets complete all as specified and as directed. |
| 46 | M&L for cleaning of all scales and dirt from RCC UG tanks and from mouths of inlet pipes of capacity exceeding 85000 ltrs and not exceeding 90000 ltrs capacity including writing letters or figures (block Roman/Italic or Indian ) of 7.5 cm height but not exceeding 30 cm to write as cleaned XX-XX-XX on each tank and writing stoops, comma, short lines, dashes, hyphens, brackets complete all as specified and as directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender