Tender For Construction Of Sub Registrar Office Building At Damapada In The District Of Cuttack Ex-Officio Sr_Building
Tender Value
70.35 Lakhs
Estimated cost
Bid Submission
17 Jul 2026
12 days left
EMD
70500
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sub Registrar Office Building At Damapada In The District Of Cuttack Ex-Officio Sr_Building
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in Excavation in hard soil or gravelly soil / soft rock within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. (I ) Hard Soil |
| 2 | Earth work in Excavation in hard soil or gravelly soil / soft rock within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.(II ) Soft Rock (not requiring blasting) |
| 3 | Fixing 25 mm. dia anchor bars in foundation rock including drilling 35 mm. dia holes, fixing wedged anchor and grouting with cement mortar 1:4 complete as per the direction of Engineer-in-charge excluding cost of M.S. rods for dams,barrages and power house structures including pull testing of 30% of anchors etc cost of all labour T&P required for the work complete in all respect as per direciton of the Engineer-in-charge..(Depth of hole only to be measured for payment purpose). (Only drilling & fixing excluding cost of anchor rod) |
| 4 | Filling foundation and plinth with sand well watered and rammed including all cost, carriage, royality, taxes and all labour, T & P etc. all complete as per the direction of Engineer-in- charge. |
| 5 | Cement concrete (1:3:6) using 40mm and down gradedhard granite crusher broken metal including all cost , carriage, royality, taxes, and all labour involved for completion of item of work as per the direction of Engineer- in - charge. |
| 6 | Providing cement concrete (1:2:4) with 12mm size clean crusher broken granite chips aggregate of approved quality from approved quarry including hoisting, lowering & levelling in position to required level in each layer not exceeding 15cm thick including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering if necessary with cost, conveyance taxes royalty labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and cess as per the specification and direction of Engineer-in-charge. |
| 7 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-Fly Ash.-brick of 25cm X 12cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge. (I ) Foundation & plinth |
| 8 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-Fly Ash.-brick of 25cm X 12cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge. (II ) In Superstructure(a )GROUND FLOOR |
| 9 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-Fly Ash.-brick of 25cm X 12cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge. (II ) In Superstructure (b )FIRST FLOOR |
| 10 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (I ) Column Base |
| 11 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.(II ) Plinth beam |
| 12 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.(III ) Column Superstructure (a )GROUND FLOOR |
| 13 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.(III ) Column Superstructure(b )FIRST FLOOR |
| 14 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.(IV ) Lintel (a )GROUND FLOOR |
| 15 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.(V ) Chajja(a )GROUND FLOOR |
| 16 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.(VI ) Fin & Shelves (a )GROUND FLOOR |
| 17 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. ( VII ) Staircase & landing(a )GROUND FLOOR |
| 18 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (VIII ) Roof Slab (a )GROUND FLOOR |
| 19 | Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge. (VIII ) Roof Slab(b )FIRST FLOOR |
| 20 | Supplying and straightening bent up or coiled rods cutting, bending, cranking, hooking, welding (if required) the M.S.Rods or Tor steel & binding and tying the grills, hoisting, lowering & placing in proper position as required for R.C.C. works with all cost, conveyance & taxes of M.S. rods or Tor steel & binding wires of 18 to 20 gauge & labour with all T&P required for the work etc. complete in all floors (weight of binding wires and laping of MS rod will not be considered for payment & payment will be made on weight of M.S.rods or Tor steel only).as per direction of the Engineer-in-charge.(a )GROUND FLOOR |
| 21 | Supplying and straightening bent up or coiled rods cutting, bending, cranking, hooking, welding (if required) the M.S.Rods or Tor steel & binding and tying the grills, hoisting, lowering & placing in proper position as required for R.C.C. works with all cost, conveyance & taxes of M.S. rods or Tor steel & binding wires of 18 to 20 gauge & labour with all T&P required for the work etc. complete in all floors (weight of binding wires and laping of MS rod will not be considered for payment & payment will be made on weight of M.S.rods or Tor steel only).as per direction of the Engineer-in-charge. (b )FIRST FLOOR |
| 22 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work with all taxes royalties & cess etc, complete as per direction of Engineer-in-charge. (a )GROUND FLOOR |
| 23 | 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work with all taxes royalties & cess etc, complete as per direction of Engineer-in-charge. (b )FIRST FLOOR |
| 24 | Providing fitting and fixing of M.S. doors, windows & grill gate of approved design and fixing in proper position including making holes in walls, R.C.C. structure and wood work etc. and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooves in walls and fixing with C.C. (1:2:4) with hard black crusher broken granite stone chips of 12mm with cost and conveyance, royalities of all materials, all labour taxes with all T&P etc. complete in all floors as per direction of the Engineer-in-charge. (a )GROUND FLOOR |
| 25 | Providing fitting and fixing of M.S. doors, windows & grill gate of approved design and fixing in proper position including making holes in walls, R.C.C. structure and wood work etc. and making good to the damages to walls or R.C.C. structure including mending or cutting to sizes or grooves in walls and fixing with C.C. (1:2:4) with hard black crusher broken granite stone chips of 12mm with cost and conveyance, royalities of all materials, all labour taxes with all T&P etc. complete in all floors as per direction of the Engineer-in-charge.(b )FIRST FLOOR |
| 26 | Providing & laying of precast interlocking concrete block of 60mm thick of approved design and filling the joints with sand on the prepared surface including frame work where necessary ramming using vibrator to proper slope and levelling curing with cost, conveyance taxes royalty labour of all materials and hire and running charges of machinaries T&P required for the work as per the specification and direction of Engineer-in-charge. |
| 27 | Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge.(a )GROUND FLOOR |
| 28 | Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge.(b )FIRST FLOOR |
| 29 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge.(a )GROUND FLOOR |
| 30 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with approved grade cement and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonary walls after racking out the joints including watering and curing, rounding of corners etc. completer with cost, conveyance, loading, unkloading, royalty and taxes of all materials, cost of all labour T&P, sundries and scaffolding required for the work with providing grooves as per specification and direction of the Engineer-in-charge.(b )FIRST FLOOR |
| 31 | Providing fitting and fixing of Vitrified tile in floors of size 600mm x 600mm of approved make on 25mm thick bed of cement mortar (1:1) joint with neat cement slury mixed with pigment to match the shade of tile including polishing, rubbing etc. including cost, conveyance, royalty, taxes of all materials and cost of all labour T&P required for the work etc. complete as directed by the Engineer-in-charge. (a )GROUND FLOOR |
| 32 | Fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge. (a )GROUND FLOOR |
| 33 | Supply fitting and fixing Anti skid floor tiles in floor printed/coloured series trade on steps and landing on 25mm thick bed of cement motar (1:1) joint with net cement slury mixed with pigment to watched and shade of the tile including rubbing and policying etc as per directin of the Engineer in charge . (a )GROUND FLOOR |
| 34 | Providing and fixing false ceiling (12.5mm Gypsum Board ) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :Providing fitting, fixing of false ceiling with Aluminium anodized T section No-3215 with 2'-0\\" center to center ,L section No-1705 upto 15 micron on 4 walls to be fixed bu means of steel screw and P.V.C. plug and the Aluminium grid 2'-0\\" x 2'-0\\" with Gypsum board suspended from ceiling etc compiete . including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete in all respects as per the direction of Engineer-in-Charge. (a )GROUND FLOOR |
| 35 | Finishing surface of wall with cement based wall putty ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete as per specification and direction of the Engineer-in-charge. (a )GROUND FLOOR |
| 36 | Finishing surface of wall with cement based wall putty ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete as per specification and direction of the Engineer-in-charge.(b )FIRST FLOOR |
| 37 | Wall painting 2 coats with plastic emulsion paint of approved shade over one coat of primer including cost of paint , scaffolding ,staging & cost of all materials , labour etc.complete as per direction of Engineer-in-charge. (a )GROUND FLOOR |
| 38 | Wall painting 2 coats with plastic emulsion paint of approved shade over one coat of primer including cost of paint , scaffolding ,staging & cost of all materials , labour etc.complete as per direction of Engineer-in-charge. (b )FIRST FLOOR |
| 39 | Finishig Wall with Weather seal Coat two coats of approved shade to out side the wall surface including cost of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge.(a )GROUND FLOOR |
| 40 | Finishig Wall with Weather seal Coat two coats of approved shade to out side the wall surface including cost of all materials, labour, T&P etc. complete as per specification and direction of the Engineer-in-charge.(b )FIRST FLOOR |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge. (a )GROUND FLOOR |
| 42 | Supplying, fiting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete. etc. complete as per direction of the Engineer-in-charge.(a )GROUND FLOOR |
| 43 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick frosted glass of approved quality complete with frame, shutters and all fitting and fixtures with all cost labour ,materials T&P etc complete for the work in all respect as per the direction of Engineer in Charge.(a )GROUND FLOOR |
| 44 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick frosted glass of approved quality complete with frame, shutters and all fitting and fixtures with all cost labour ,materials T&P etc complete for the work in all respect as per the direction of Engineer in Charge.(b )FIRST FLOOR |
| 45 | Painting two coats with any approved Enamel Paint over a coat of approved primer to wood work and iron work including cost of the primer and paint sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge.(a )GROUND FLOOR |
| 46 | Painting two coats with any approved Enamel Paint over a coat of approved primer to wood work and iron work including cost of the primer and paint sand papering, polishing the surface with cost, conveyance and taxes of all materials and labour with T&P required for thework etc. complete in all respect as per direction of the Engineer-in-charge. (b )FIRST FLOOR |
| 47 | Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminum jally and jointing angle conforming to standard Aluminium sections etc. complete.(a )GROUND FLOOR |
| 48 | Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete as per specification & direction of the Engineer-in-charge..(a )GROUND FLOOR |
| 49 | Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. as per direction of Engineer-in-charge. (a )GROUND FLOOR |
| 50 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group A |
| 51 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group B |
| 52 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )Group C |
| 53 | Recessed wiring to Fan Point in... Group B |
| 54 | Recessed wiring to Call Bell Point in... Group C |
| 55 | Recessed wiring to Exhaust Fan Point in Group B |
| 56 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 57 | S/F of Angle holder replacing Ceilling Rose |
| 58 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 59 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 60 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 61 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch complete with wiring on 12 modular M.S. box with modular cover. |
| 62 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 63 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 64 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 4 Modular box with base & cover |
| 65 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 6 Modular box with base & cover |
| 66 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 8 Modular box with base & cover |
| 67 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 12 Modular box with base & cover |
| 68 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1) |
| 69 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x2.5+1x1.5 (1.8.2) |
| 70 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x4+1x1.5 (1.8.3) |
| 71 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 4x6+2x2.5(1:8:10) |
| 72 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 4x10+2x4(1:8:11) |
| 73 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 74 | S/F of 'C' series SP MCB of 6/10A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 75 | S/F of 'C' series 4P MCB of 63A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 76 | S/F of 'C' series DP MCB of 16 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 77 | S/F of 4Way (8+12) TPN DD Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 78 | S/F of 6Way (8+18) TPN DD Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 79 | S/F of Cu .Earth Plate Earthing 600 mm x600mmx3.15mm with Salt & Charcoal for Earth electrode (3:5)+(3.6) |
| 80 | S/L of 25mm x 5mm Cu. earth strip in 40 mm dia G.I.Pipe(3.11) |
| 81 | Supply and fixing of 230mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 82 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 83 | S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab / Klite / Panasonic) |
| 84 | Supply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 85 | S/F step type modular fan regulator |
| 86 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) |
| 87 | Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic ) |
| 88 | S/F of 10w Watt LED Bulb ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic ) |
| 89 | S/F of 2000VA/24V Invertor machine with 2 nos 180Ah tall tubular Battery including Trolly (Make-Luminous /microtek/v-guard) |
| 90 | S/F of 18W LeD Squre (12\\"×12\\") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic) |
| 91 | S/F of 15A socket on 2Modular Board board for A.C |
| 92 | S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 93 | Provision of Armoured cable size 3 1/2 x 25sqmm (24) |
| 94 | Laying of MV cable upto 25sqmm in ground (5.1.1) |
| 95 | Laying of MV cable upto 25sqmm on surface (5.5.1) |
| 96 | Supply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make : Legrand / Hager / Scheider / Seimens)-1No.2. TPN Busbar-1set with DC Gland for 25mmsq aluminium armoured cable and 3. 4Pole Spreaders link (63A-200A)4. 63Amp 4P Changeover-1No.5. 16Amp DP MCB-2Nos.6. Digital Volt meter & Ameter three phase 7. All accesories & Connection (Rating & Danger borad) |
| 97 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC. Initial lift upto 1.50m |
| 98 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC.From 1.50m to 3.00m depth |
| 99 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 100 | Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 101 | Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 102 | Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC |
| 103 | Supplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC |
| 104 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.- |
| 105 | Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC- |
| 106 | Supplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 107 | Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 108 | Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 109 | Filling F&P with excavated materials including watering and ramming as per direction of EIC |
| 110 | Supplying all labour materials T&P and fixing of 2 inch RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC |
| 111 | Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y |
| 112 | Supplying all labour materials T&P and fixing of MS step iron in 20mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC- |
| 113 | Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm) |
| 114 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 115 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 116 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC.Ground Floor Wall |
| 117 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor |
| 118 | Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC. |
| 119 | Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall |
| 120 | Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.375mm thick wall |
| 121 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
| 122 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 123 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S- trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S- trap plain(Neycer/ Parry ware/ Cerra) |
| 124 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra) |
| 125 | Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast) 110mm dia UPVC SWR Pipe |
| 126 | 160mm dia UPVC SWR Pipe |
| 127 | 110mm dia U-PVC S. Trap |
| 128 | 110mm dia U-PVC P. Trap |
| 129 | 110mm U-PVC S/J with Door |
| 130 | 110mm U-PVC door bend |
| 131 | 110mm dia U-PVC Plain bend |
| 132 | 110mm U-PVC Plain Tee |
| 133 | 110mm U-PVC Cowl |
| 134 | 125mm dia CP Grating |
| 135 | 75mm dia U-PVC SWR Pipe |
| 136 | 75mm dia U-PVC Plain Tee |
| 137 | 75mm U-PVC Door Bend |
| 138 | 75mm U-PVC Plain Bend |
| 139 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC including all pipe connection .550x400mm WHB-(Hindware / Paryware/Nycer/ cerra ) |
| 140 | Pedestral 550x400mm WHB |
| 141 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest etc all complete as per specification and direction of the E.I.C. ( Hindware/Paryware/Nycer/ cerra ) |
| 142 | Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror Good quality |
| 143 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Jaquar make |
| 144 | CP Towel ring heavy Stainless steel with Jaquar make . |
| 145 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
| 146 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower.(Shower+Arm) |
| 147 | Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality |
| 148 | Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Hindware / Paryware/Nycer/ cerra ) |
| 149 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
| 150 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber |
| 151 | Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C.(910mmx910mmx910mm) |
| 152 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.22m dia x 2.10m deep |
| 153 | Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit |
| 154 | Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing |
| 155 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. 20 mm dia C-PVC Pipe( Internal) |
| 156 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. 25mm dia C-PVC Pipe (external) |
| 157 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. 40mm dia C-PVC Pipe (external) |
| 158 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia CP pillar cock JAQUAR Make |
| 159 | 20mm dia cp concealed stop cock JAQUAR Make |
| 160 | 15mm dia cp angle stop cock JAQUAR Make |
| 161 | 15mm dia cp bib cock S.B. JAQUAR Make |
| 162 | 15mm dia cp bib cock L.B. JAQUAR Make |
| 163 | 15mm dia CP Two way bib Cock JAQUAR Make |
| 164 | Health Fuccet JAQUAR Make |
| 165 | 15mm dia CP flange JAQUAR Make |
| 166 | 15mm dia CP Extension piece JAQUAR Make |
| 167 | 25mm dia Brass Ball Valve |
| 168 | 40mm dia Brass Ball Valve |
| 169 | Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 2000 lit sintex tank (1st Floor) |
| 170 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC. 2000 ltr capacity tank 1st floor |
| 171 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.Additional ht of 5.00mtr |
| 172 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
| 173 | Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC. |
| 174 | Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
| 175 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 176 | Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 177 | Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.25mm dia HDPE Pipe(Internal Pipe) |
| 178 | ( SINKING OF TUBE WELL) Labour for drilling a perfectly bore holes as specified dia for a specified defth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per direction of engineer incharge including use of own rig with its accessories, tools and plants and consumables etc. for lowering of 125mm dia PVC/G.I./M.S. pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (PVC/G.I./M.S) casing pipes if required to prevent collapse of over borden is to be provided by the contractor including lowering and withdrawing after completion of the tube well. (a) Labour for Drilling (i) 0.00 mtr to 91.00 mtr & above |
| 179 | Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe.a) Lowering of 125mm dia PVC casing pipei) From 0 mtr to 30.00m and above |
| 180 | Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe.a) Cost of 125mm dia PVC casing pipe (80 Sch),i) From 0 mtr to 30.00m and above |
| 181 | Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe.a) Cost of 125mm dia PVC strainer pipe (80 Sch) |
| 182 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge as obtained from the tube well including supply of and use of all necessary equipments and labour as per the direction of engineer incharge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysJul 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender