Tender For Repair To Hangars, Storage/ Technical Sheds, Plastering And Camouflaging Painting Under Ge (Af) Mc Chandigarh
Tender Value
70 Lakhs
Estimated cost
Bid Submission
01 Aug 2026
27 days left
EMD
1.30 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Hangars, Storage/ Technical Sheds, Plastering And Camouflaging Painting Under Ge (Af) Mc Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness complete all as specified and directed. |
| 2 | Supply and Fix for mild steel rolled sections FE-410-W Gde E-250 quality 'A' as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails for gusset plates,, valley gutter and trusses etc, fixed with angle cleats or other connecting plates and hanging also fastening and fixing including dismantling old , complete all as specified and directed. |
| 3 | Supply and Fix 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws, and washer, in roofs wall etc with grade of zinc coating 275 GSM fixed with self tapping screws complete all as specified and directed. |
| 4 | All as per item No. 3.00 here-in-before but except sheets re-use sheets retrieved from Item No 01.00 above. (Note : The rate quoted shall deemed to be included for shifting & transportation of sheets from one location to other location at any distance.) |
| 5 | Supply and Fix 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugation side laps fixed with self tapping screws, complete all as specified and directed. |
| 6 | Supply and Fix 2mm thick Fibre glass reinforced translucent Trapizoidal profile sheet as per site requirement fixed with self tapping screws, complete all as specified and directed. |
| 7 | Supply and Fix 0.63 mm thick plain, black, mild steel sheeting in ridges hips, valley gutters, drip and straight flashings (length and girth as fixed), fixed with self tapping screws, complete all as specified and directed. |
| 8 | Supply and Fix 2mm thick plain, black, mild steel sheeting in ridges hips, valley gutters, tank for rain water collection with hole for fitting of 200 mm Pvc pipe and welded or soldered joints are provided complete all as specified and directed. |
| 9 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete and directed. |
| 10 | Supply and Fix for 200mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls including stack clamp to fix Rain water pipe with wall( As per site requirement) complete all as specified and as directed. |
| 11 | Supply and Fix for 200mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 12 | Material and labour for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified and directed |
| 13 | Supply and Fix for prepainted galvalume aluminium zinc coating GI based corrugated steel steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa (AZ -150) as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make : TATA BLUESCOPE INDUSTRIES Ltd/JSW Steel/BHUSAN Steel Ltd or equivalent as per list of make given in PS. |
| 14 | Supply and Fix for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall/ valley gutters, etc fixed with self tapping screws complete all as specified and as directed. |
| 15 | Material and labour for applying two coats of synthetic enamel paint (in camouflage pattern using number of colours) over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed. |
| 16 | Material and Labour for applying one coat of synthetic enamel paint on old steel surfaces over 10cm width or girth, including preparation of old painted surfaces as per existing pattern/camouflage complete all as specified and directed. |
| 17 | Material and Labour for applying Two coats of synthetic enamel paint over and including a coat of red oxide primer, on new steel surfaces over 10cm width or girth, including preparation of steel surface, complete all as specified and directed. |
| 18 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames, metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. |
| 19 | Supply and Fix for rough cast, wired glass 6.4mm thick and glazing with putty/beads (any type as per site requirement) in square not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 20 | Supply and Fix for rough cast, wired glass 6.4mm thick and glazing with putty/beads (any type as per site requirement) in square exceeding 0.5 Sqm but not exceeding 0.75 Sqm in each pane complete all as specified and directed. |
| 21 | Supply and Fix for rough cast, wired glass 6.4mm thick and glazing with putty/beads (any type as site required) in square exceeding 1.0 Sqm but not exceeding 1.5 Sqm in each pane complete all as specified and directed. |
| 22 | Material and Labour for 6mm Epoxy PU flooring complete all as specified and directed and as per manufacturer's instruction consisting of the following steps/stage.(a) Surface cleaning : Cleaning of surface free from dust, dirt, moisture & foreing material from the floor by grinding and scrubbing.(b) Material and Labour for Epoxy polyurethane floor coating of 200 micron thick priming coat 3800 microns screed coat and 2000 micron thick top coat including necessary prepartion of the existing surface all as per specified, directed and manufacturer's instructions complete all as specified and directed.(c) Forming joints 8 mm to 40mm average width and 20mm average deep with closed cell poyethylene back rod of required dia more than width of joint and top 12mm depth primed and sealed with polyurethane based sealing compound including applying masking tap on edge of joints to prevent accidental spillage including cutting the masking tape by mechanical means after application of sealant including cutting out the existing joint up to the required width /depth using diamod cutter, removing the debris and other foreign material to out side from defece land complete all as specified and dirtected. |
| 23 | Supply and Fix in repair Nylon bird proofing poly raisin net (approx) 1.00 mm dia and (approx) 25X25 mm mesh size of squre or diamond type .twin breaking strength 21 kgf min,mesh breaking strenth 17 kgf min,knot breaking strength 27 kgf min,incl. scaffolding for fixing with truss, purlins by binding with nylon wire of same quality and same dia etc. proper tightening in straight, levelled at any height up to 25 m of hangers, complete all as specified and directed.Note:- Testing of material shall be carried out as per IS: 5812 (part-4) : 1993 & ISO 1805: 1973 The cost of which shall be demmed to be included in the rate quoted. |
| 24 | Material and Labour Preparation of old steel surfaces of existing treatment for plain/corrugated/semi corrugated steel surfaces over 10cm width/girth and applying one coat of synthetic enamel paint (in camouflage pattern using number of colours) at any height including necessary scaffolding etc complete all as specified and as directed.Note : Pattern of camouflage shall be approved by GE. |
| 25 | Material and Labour for for preparation of old plastered/unplastered/ concrete surfaces of walls and applying two coats of exterior emulsion paint (in camouflage pattern using number of colours) over and including one coat of primer and at any height including necessary scaffolding etc complete all as specified.Note : Pattern of camouflage shall be approved by GE. |
| 26 | Material and Labour for preparation of old plastered/unplastered/ concrete / Kerb stone surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint and at any height including necessary scaffolding etc complete all as specified and as directed. |
| 27 | Material and Labour for preparation of old plastered/unplastered/ concrete / Kerb stone surfaces over 10cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of primer and at any height including necessary scaffolding etc complete all as specified and as directed. |
| 28 | Demolition of brick work built in cement mortar in any position and in any location complete all as specified and directed. |
| 29 | Material and Labour brick work with sub Class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 in any location, complete all as specified and directed. |
| 30 | All as per Item No. 29.00 above but except bricks. |
| 31 | Material and Labour for Rendering 15 mm thick on brick /concrete surfces in CM 1:4 finished even & smooth without using extra cement complete all as specified & directed. |
| 32 | Demolition of cement concrete (unreinforced) below or above ground level n exc 15 cm thick complete all as specified and directed. |
| 33 | Material and Labour for 100mm thick cement concrete type B-2 (1:2:4) 40mm graded aggregate finished surface even and smooth without using extra cement including necessary form work complete all as specified and directed. |
| 34 | Demolition of re-inforced cement concrete of any description and in any position (reinf cut as required to facilitate demolition) complete all as specified and as directed. |
| 35 | Material and Labour for TMT bar 6 to 8mm and over and cut to length, bent to shape required including cranking bending, spirally for hoping for columns, cover slab, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed. |
| 36 | Material and Labour for Providing, precast cement concrete (1:2:4) Type B1 (20 mm graded aggregate) set in CM (1:6) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed. |
| 37 | Material and Labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) in surface channel and drain/manhole etc complete all as specified and as directed. |
| 38 | Material and Labour for PCC (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as in benching, kerb,bed plates, coping, drains including necessary formwork etc. complete all as specified and as directed. |
| 39 | Supply and Fix factory made precast RCC manhole cover slab with and incl frame designation LD 2.5, clear opening of frame size (1.00m x 1.00m x 0.075m/1.20m x 0.60m x 0.075m) thick ISI marked (IS-12592:2002) (As approved by GE) complete all as specified and as directed. |
| 40 | Material and Labour for painting lines and dashes etc on PU Flooring by applying two coats of PU floor marking paint white/black/yellow/orange or any other colours and 20cm/25cm/30cm wide strips on PU Flooring surface by using mechanical PU floor marking machine like cold spray(Airless/Pneumatic)/Electrostatic cold-painting machine or equivalent approved including complete scrapping of old treatment/existing PU Paint layers and complete removal of dust particles by brushes or sweeping with brooms complete all as specified directed.Note : Colour should be approved by GE. Please Enable Macros to View BoQ information |
| 41 | Material and Labour for painting lines and dashes etc on PU Flooring by applying two coats of PU floor marking paint white/black/yellow/orange or any other colours and 20cm/25cm/30cm wide strips on PU Flooring surface by using mechanical PU floor marking machine like cold spray(Airless/Pneumatic)/Electrostatic cold-painting machine or equivalent approved including complete scrapping of old treatment/existing PU Paint layers and complete removal of dust particles by brushes or sweeping with brooms complete all as specified directed.Note : Colour should be approved by GE. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysAug 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender