Tender For Repair/Replacement Of Old Unsv Db, Mcb And Connected Items Internal Wiring, Earthing Etc Under Ge (West) Colaba, Mumbai
Tender Value
50 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
18 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Old Unsv Db, Mcb And Connected Items Internal Wiring, Earthing Etc Under Ge (West) Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminum point wiring (Light fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators socket, light fittings etc removing materials for taking credit and making good disturbed surfaces of wall, floor, etc., complete all as specified and directed. |
| 2 | M&L Point wiring using FRLSH grade PVC insulated, unsheathed, stranded copper conductor of size 1.5 Sqmm and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed stranded copper conductor as earth continuity wire to be drawn in and including PVC casing capping of suitable size incuding MS sheet metal switch / terminal box 1.2 mm thick upto (200x300)mm size box and beyond that not less than 1.63mm thick with Hylam sheet cover 3.00mm thick and making good disturbed surface to walls complete all as specified for :- one light/fan point controlled by one switch |
| 3 | All as per item No. 2 above but for one 5 Amps switch socket combination on independent board. |
| 4 | All as per item No. 2 above but for one 5 Amps switch socket combination on same board. |
| 5 | All as per item No. 2 above but for 15/16 Amps switch socket out let point by using 2 runs of 4 Sqmm FRLSH grade, PVC insulated, stranded copper, conductor and 4 Sqmm FRLSH grade PVC insulated, stranded copper conductor as earth continuity conductor. |
| 6 | S & F Including connection of switch piano, flush button, type single pole one way 5 Amps, complete all as specified and directed. |
| 7 | S & F Including connection of switch socket combination 5 Amps 2 in 1 flush type, complete all as specified and directed. |
| 8 | S & F Including connection of switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type, complete all as specified and directed. |
| 9 | S & F ceiling rose, polycarbonate three terminals, complete all as specified and directed. |
| 10 | S & F Electronic fan regulator, stepped type 120/280V, complete all as specified and directed. |
| 11 | Supply ony Modular switch 1 way 6A, 1 module, complete all as specified and directed. |
| 12 | Supply ony Modular switch 1 way 10A, 1 module, complete all as specified and directed. |
| 13 | Supply ony Modular switch 1 way 16A, 1 module, complete all as specified and directed. |
| 14 | Supply ony Fan step regulator, 120W - 2 module, complete all as specified and directed. |
| 15 | Supply ony Switch socket Combination 16A, 6 pin, 3 module, complete all as specified and directed. |
| 16 | S & F Switch socket outlet 3 pin 6 amp flush type, complete all as specified and directed. |
| 17 | S & F Switch socket outlet 3 pin, 16 amp, flush type, complete all as specified and directed. |
| 18 | Disconnecting electrically and dismantling of ceiling fans of any make capacity and type, washing thoroughly of bearing /bush, fan blades and body of fan by kerosene /petrol etc and greasing for smooth functioning. Replacement of worn out/defective unserviceable parts (where ever necessary), reassembling the same including provision of three core flexible copper wire 1.5m long, including one coat of synthetic enamel paint (first quality) with super glossy finish to fan body and blades refixing the same to its original position including testing complete all as directed by Engineer-in-Charge. (Note: Replacement of worn out/ defective/unserviceable parts, flexible copper wire and rewinding shall be measured and paid separately under relevant items of these schedule). |
| 19 | All as per item No. 18 here-in-before but for Exhaust fans of any size and make. |
| 20 | All as per item No. 18 here-in-before but for air circulator fans/wall mounting fans of any size and make. |
| 21 | M&L Rewinding the motor of AC ceiling fan of any make and size (1200/1400mm) with super enamelled copper wire of adequate size/gauge including all insulation materials, varnishing etc, complete all as directed by Engineer-in-Charge. |
| 22 | All as per item No. 21 here-in-before but for exhaust fans of 300/380mm sweep of any make. |
| 23 | All as per item No. 21 here-in-before but for air circulators/wall mounting fans of any make and size. |
| 24 | Supply only Ball bearing of suitable size for any type/make of ceiling fan, Make : TATA/NBC/SKF. |
| 25 | All as per item No. 24 here-in-before but for Exhaust fans of any type/size/make. |
| 26 | All as per item No. 24 here-in-before but for air circulators/ wall mounting fans of any type/size/make. |
| 27 | Supply only capacitor 220 volts, 2.5 mfd suitable for ceiling fan, Make : SARADA/ TIBOCON/ UNIVERSAL. |
| 28 | Supply only capacitor 220 volts, 4 mfd suitable for ceiling fan, Make : SARADA/ TIBOCON/ UNIVERSAL. |
| 29 | S & F in repair Hanging clamp for ceiling fan of adequate size including rubber reel, nuts, bolts and washers etc complete including taking down old unserviceable one, all as directed by Engineer-in-Charge. |
| 30 | S & F Switch socket outlet multipurpose 3 pin, 16 amp and one pin, 6 amp controlled by one switch complete all as directed by Engineer-in-Charge. |
| 31 | Supply and fixing LED lights fitting 1x 16W, (Cool type) 220V, AC decorative box type with driver, holder including LED tube light warm type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 32 | Supply and fixing LED lights fitting(warm type) 1x 16W, 220V, AC decorative box type with driver, holder including LED tube light cool/white type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 33 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 34 | Supply & fix LED luminaire 600 mm x 600mm 35/36 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holder & LED lamp suitable for roof ceiling including connection up with driver three core flexible copper conductor case of suitable size, complete all as specified and directed. |
| 35 | S&F 35W Energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP65 rotection and Impact resistance of IK07 with 10KV Built-in Surge Protection Devicecomplete with all fixing arrangement suitable for operating voltage 100 to 270 Volts, complete all as specified and directed. |
| 36 | Taking down serviceable / unserviceable switch fuse unit/MCB DB with MCB etc for necessary repair/replacement and reuse, complete all as directed by Engr-in-Charge. |
| 37 | S&F MCB DB TPN 4 way having degree of protection as per IP 43-IK09 with metal door (double door) 415 Volts complete copper bus bar with neutral link with provision for MCB TPN as incomer and MCB TP, SP MCBs as outgoing with blanking plates etc, complete all as directed by Engr-in-Charge. |
| 38 | S&F MCB DB SPN 8 way having degree of protection as per IP 43-IK09 with metal door (double door) 230 Volts complete copper bus bar with neutral link with provision for MCB SPN as incomer and MCB SP MCBs as outgoing with blanking plates etc, complete all as directed by Engr-in-Charge. |
| 39 | S&F MCB DB SPN 4 way having degree of protection as per IP 43-IK09 with metal door (double door) 230 Volts complete copper bus bar with neutral link with provision for MCB SPN as incomer and MCB SP MCBs as outgoing with blanking plates etc, complete all as directed by Engr-in-Charge. |
| 40 | S&F DB VTPN 4 way having degree of protection as per IP 43-IK09 with metal door (double door) 415 Volts complete copper bus bar with neutral link with provision for MCCB TPN as incomer and MCB TP, SP MCBs as outgoing with blanking plates etc, complete all as directed by Engr-in-Charge. |
| 41 | S&F MCCB, 4 pole, 63 to 100 Amp with ultimate breaking capacty Icu-16kA at 415 Volts and fixed thermal magnetic release, complete all as directed by Engr-in-Charge. |
| 42 | S&F MCB, 3 pole, 32 Amp C curve with ultimate breaking capacty Icu-16kA at 415 Volts, complete all as directed by Engr-in-Charge. |
| 43 | S&F MCB, 4 pole, 32 Amp C curve with ultimate breaking capacty Icu-16kA at 415 Volts, complete all as directed by Engr-in-Charge. |
| 44 | S&F MCB SPN 6 to 32 Amps 230 Volt, 10 KA, 'C' series, complete all as directed by Engr-in-Charge. |
| 45 | S&F MCB SP 6 to 32 Amps 230 Volt, 10 KA, 'C' series, complete all as directed by Engr-in-Charge. |
| 46 | Supply, install & testing exhaust fan sturdy Engineering plastic 300 mm sweep heavy duty 1400 RPM complete fixed to wall with suitable size bolts, grouted to wall and connecting up including provision of cable from connector to fan with three core flexible cable of size 24/0.2mm with copper conductor from ceiling rose to exhaust fan and taking down old exhaust any type and make, complete all as directed by Engr-in-Charge. |
| 47 | Supply, install & testing exhaust fan sturdy Engineering plastic 250 mm sweep heavy duty 1400 RPM complete fixed to wall with suitable size bolts, grouted to wall and connecting up including provision of cable from connector to fan with three core flexible cable of size 24/0.3mm with copper conductor from ceiling rose to exhaust fan and taking down old exhaust any type and make, complete all as directed by Engr-in-Charge. |
| 48 | Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement, complete all as directed by Engr-in-Charge. |
| 49 | M&L for submain wiring complete all as specified with Six runs of 1100 Volts grade 10.0 sqmm PVC insulated FRLSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking (Phases R-Y-B, Neutral and Earth) in and including non metalic rigid PVC conduit medium grade with ISI mark of suitable size with all accessories as per IS code concealed in wall/ceiling /floor/roof etc,. the earth wire to be connected to common earth dolly complete all as specified and directed by Engineer-in-Charge NOTE:- Six runs of 10.0 sqmm copper wire and one run of 25mm PVC conduit will be measured as one run, complete all as directed by Engr-in-Charge. |
| 50 | M&L for submain wiring complete all as specified with three runs of 1100 Volts grade 6.0 sqmm PVC insulated FRLSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking (Phase, Neutral and Earth) in and including non metalic rigid PVC conduit medium grade with ISI mark of suitable size with all accessories as per IS code concealed in wall/ceiling /floor/roof etc,. the earth wire to be connected to common earth dolly complete all as specified and directed by Engineer-in-Charge NOTE:- Three runs of 6.0 sqmm copper wire and one run of 25mm PVC conduit will be measured as one run, complete all as directed by Engr-in-Charge. |
| 51 | M&L Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground connected to galvanized earth lead strip of size 25 mm x 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron including 40mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal or coke and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit with PCC type C1 , 1:3:6 (using 20 mm graded stone aggregate), 50mm thick precast RCC type B1, (1:2:4)(using 20 mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar including galvanised strip of size 25mm x 4mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No.3 of SSR Part-I, 2009 and all as directed including taking down old unserviceable one. (Note : GI strip upto 7.5 m length shall be deemed to include in the cost of above item. |
| 52 | M&L Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground connected to galvanized 4mm dia galvanised iron including 40mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal or coke and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit with PCC type C1 , 1:3:6 (using 20 mm graded stone aggregate), 50mm thick precast RCC type B1, (1:2:4)(using 20 mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar including galvanised strip of size 25mm x 4mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No.3 of SSR Part-I, 2009 and all as directed including taking down old unserviceable one. (Note : GI strip upto 7.6 m length shall be deemed to include in the cost of above item. |
| 53 | S & F in repair Earthing conductor with GI strip of size (25 x 4) mm, complete all as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender