Tender For Construction Of Intermediate Pumping Stations (Ips) Including providing and laying Of Sewer Networ, Rising Main And Allied Works At Baramulla (Adv. Cost Of Rs. 342.37 Lacs)
Tender Value
3.42 Crore
Estimated cost
Bid Submission
20 Jul 2026
13 days left
EMD
6.84 Lakhs
Bank guarantee accepted
Document Fee
4500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Intermediate Pumping Stations (Ips) Including providing and laying Of Sewer Networ, Rising Main And Allied Works At Baramulla (Adv. Cost Of Rs. 342.37 Lacs)
BOQ
| Sl. No. | Item Description |
| 1 | (Part-A) Civil Network: Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ( All kinds of soil). |
| 2 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sidesand ramming of bottoms lift upto 1.5 m, including getting out excavated earth anddisposal of surplus excavated earth as directed, within a lead of 50 metres: (All kinds of soil). |
| 3 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 4 | Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). |
| 5 | Depth Exceeding 1.5m but not exceeding 3.0m. |
| 6 | Supply & laying of stone soling in horizontal on level including ramming, Watering and dressing (Complete Job). |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 8 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 9 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 10 | 1:2:4 (1 cement : 2 Coarse sand : 4 graded stone agg. 20mm nominal size) (crushed) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level |
| 12 | (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 14 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 15 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:(1:3:6 or richer mix (i/c equivalent design mix) |
| 16 | Providing & Laying to level & slope, with proper grade pipes of Class NP3/NP4 of following internal dia & grouting the pipe joints with cement slurry 1: 2 mix (1 cement: 2 fine sand) and also sealing the pipe joints with fixing of Rubber Gaskets incl. Cost of cement, sand, Rubber gaskets and RCC pipes incl. Testing of joints & all carriages of pipes upto site of work (Complete job). |
| 17 | 200mm dia NP3 |
| 18 | 250mm dia NP3 |
| 19 | 300mm dia NP3 |
| 20 | 500mm dia NP4 |
| 21 | Centering and shuttering incl. Strutting, propping etc and removal of form work for:- |
| 22 | Foundations, footings, bases of columns etc. for mass concrete |
| 23 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 24 | Suspended floors, roofs, landings, balconies and access platforms. |
| 25 | Edges of slabs and breaks in floors and walls Above 20 cm wide |
| 26 | Well Steining |
| 27 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Thermo-Mechanically Treated bars of grade Fe-500D or more). |
| 28 | Providing & Fixing of Polycrate Manholes covers & frame including all safe carriages upto site of work (Complete Job). |
| 29 | Providing & Fixing of Square Shaped Polycrate Manholes covers & frame size 600mm * 600mm including all safe carriages upto site of work (Complete Job). |
| 30 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Welded). |
| 31 | Supplying and stacking at site (53 mm to 22.4 mm) including filling in trunches on both sides of RCC Pipe (Complete Job). |
| 32 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 33 | Providing & laying House connections with the following PVC accessories of ISI make (Prince-B Type) incl. all carriages (Complete Job). |
| 34 | PVC Pipe 100mm dia |
| 35 | 100mm PVC accessories |
| 36 | PVC Pipe 150mm dia |
| 37 | 150mm PVC accessories |
| 38 | Well sinking to level including supply/engagement of all types of well sinkers including Headman; Assistant Well sinker, Labour (Skilled / unskilled) supply of sand,E.C. Bags, filling of sand into E.C. Bags, including stitching loading/unloading of sand filled Bags after every casting on plate form, providing of plate form of required strength including its fixing/Removal after every casting disposal of loading material and including cost of scaffolding charges, carriage of all materials what so ever involves. The job includes providing and fixing of 0.63mm×300mm G.I. Sheet after every casting/joints to prevent leakage including adjustment to steel edge in level on ground after preparation of ground by way of levelling etc (Complete Job). |
| 39 | Provision for repair and restoration of under ground utilities like water supply pipes (G.I, HDPE, Cast Iron,MS Pipe etc) Telephone Cables and optic fibre etc, inlcuding all accessories required to rectify the damage caused to its original position in all respects including all carriages all told to be paid as per actual. |
| 40 | Carriage of Materials by Mechanical Transport from Source to site of work: - |
| 41 | Stone soiling from source avg 12kms |
| 42 | Stone Agg 40mm from source avg 12kms |
| 43 | Stone Agg below 40mm from source avg 12kms |
| 44 | Sand from source avg 20kms |
| 45 | (Part-B) Electro-Mechanical Equipments: Supply, installation, testing and commissioning of submersible type pump sets with motors, SS guide Rails, submersible cable ( Power cable, control cable, instrumentation cable each 100 meter length) ,ultrasonic level transmitter(0-10 Mtr),soft starter panel, duck foot pedestal etc Type of pump: Non clog centrifugal volute type sewage submersible Pumps Type of pump: Non clog centrifugal volute type sewage submersible Pumps Capacity= 150 M3/Hr Head =40meters or above Motor rating = 40-50 H.P 1450 rpm |
| 46 | Providing fitting and testing of MS rising main 200 mm dia 5.4 mm thickness from IPS to main sewage sump of STP. The job includes P/F of MS bends, fabrication of easy bends ,flanges, rubber gaskets nut and bolts etc for successful execution of work at site. |
| 47 | Providing fitting and testing of 200 mm dia sluice valves |
| 48 | Providing fitting and testing of 200 mm dia Non return valves |
| 49 | Providing fitting and testing of MCCB 400 Amp |
| 50 | Providing fitting and testing of copper wound servo stabilizer 200 KVA for input voltage of 156 Phase to phase and output voltage 415 volts phase to phase. |
| 51 | Providing fitting and testing of 160 KVA D.G. set confirming to CPCB IV guide lines along 185 Sq mm 3.5 core Al cabling from D.G set to main MCC panel, earthing as per OEM recommendations. The job includes P/L of RCC foundation block as per OEM recommendations along with CGI roofing. |
| 52 | Providing fitting and testing of 250 KVA HT/LT substations including ST poles, ABC conductor, ,trivectometer, and all other allied accessories required for successful commissioning. The job also P/L of single core aluminum conductor 240 Sq mm from LT/HT substation to main control panel The necessary clearance for installation/commissioning is in contractor’s scope of work along with earthing of substation as per IEE rules. |
| 53 | Providing fitting and testing of 70 MM2 4 core submersible type copper conductor for internal connections from panel to starters to motors. |
| 54 | Providing fitting and testing of G.I cable tray 150 mm with structural supports. |
| 55 | Providing ,fabrication erection of MS working plate form over the main pumping sump. The MS frame is to be fabricated out of ISMB, ISMC and angle iron. The frame is to be covered by MS chequerred plate 6mm thick and the openings at the requisite places are to be fabricated with hinge mechanism for the lifting and lowering of the pumping units during maintenance .Fabrication and erection of MS ladder 6 mtr long to be erected inside the sump.The details of ISMB, ISMC, Angle iron and chequered plates are as under.i. ISMB 150=10 RM.@ 15Kg/RM=150 kgii. ISMC 100=10 RM @ 9.56Kg/RM=95.6 kgiii. ISA 65=30 RM @5.80Kg/RM=174 kgiv. Chequered Plate 6 mm=20 [email protected]/SM= 942kgTotal weight=1361.6 kg |
| 56 | Supply, installation, fitting, testing and commissioning of under running, outdoor type monorail electric hoist of 3 TON capacity and lift of 8 M capable of travelling across (Right & left) and lifting and lowering (Up & Down) movement. The technical speciation of the EOT is as under Duty Or Class of hoist : Electric hoist, under running, outdoor type with continuous operation.Capacity=3 ton Lift of Hoist=8MSpecification IS3177 ( 1999):IS800( 1976)Motor : Electric hoist, under running, outdoor type with continuous operationHoist Speed:- 4 m/min (Max.)Control/operation of electrical hoist Pendent station control to be operated from MFL (apprx. 12 Feet vertical height) complete with control panelWire Rope manufacturing and testing :-As per ASTM A 1023M-02 and ASTM A586Number of Falls : 4 or higherWire rope diameter: As per IS codeTensile strength: 1770 N/mm² ( minimum)Rope Drum: un-flanged Material :seamless pipeDrum dia : As per IS code Drum Length : As per requirementType of bearing:-SA spherical roller/ball bearingHooks: Type Plane ‘C’ Shank Swiveling: Yes On Thrust BearingSafety latches: To be ProvidedDesigned: According to DIN-15400Type of Brakes: Electro hydraulic thrust or electromagnetic disc typeLimit Switch: Rotary The hoist system shall be complete in every respect and shall be tested on load at site.Note:-The equipment shall be provided with company test certificate. |
| 57 | Illumination of the pump house Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysJul 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender