Tender For Providing Aluminium Partition Arrangements For Nallur Zonal Office In Ward No.48.Estimate Amount : Rs.7.50 Lakhs
Tender Value
7.50 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
9 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruppur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Aluminium Partition Arrangements For Nallur Zonal Office In Ward No.48.Estimate Amount : Rs.7.50 Lakhs
BOQ
| Sl. No. | Item Description |
| 1 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50m x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/ m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. |
| 2 | Wiring with 2 x 1.5 sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 point sper coil) |
| 3 | Wiring with 2 x 1.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non interlocking Wall socket with 5A flush type switch with painting of suitable colour with continuous earthwire connection of 1.5 sq.mm copper wire for open PVC plug point |
| 4 | Supply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. |
| 5 | Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting |
| 6 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan 5 star rated complete (Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18\\") |
| 7 | Hydraulic Door Closer of various sizes of approvedquality using Aluminium Extruded Section Body TubularType Universal Hydraulic Door Closer with Double SpeedAdjustment (with ISI Monogram) |
| 8 | Supply and fixing of Lock for Aluminium Doors |
| 9 | Supply and fixing of Lock for Aluminium Sliding Windows |
| 10 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 11 | Supply and fixing of 150W LED street light fitting with LED (Higher end) with 40mm dia. GI pipe (class B) with 1 no.40 mm dia GI bend complete on the existing post/ on wall with 1.5 sq.mm PVC unsheathed FRLS copper leads with MS clamps and with painting |
| 12 | Supply and fixing of 16 x 11/4\\" Rack, Plate - 4 nos, Height - 6 1/2 feet, Powder Coating Colour Brown / White Plate - 18 Gague, Leg - 1/4 x 1/4 pipe etc., |
| 13 | Add G.S.T @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender