Road Transport and Highways Government Departments Closing in 5 days TDR #56302889

Tender For List Of Approved Construction Materials For The Preparation Of Schedule Of Rates For The Year 2026, Basic Rates Of Which To Be Approved By The State Level Schedule Rate Committee (Materials Should Conform To Relevant B.I.S., Mord And Mort&

Issued by Government Departments · Hazaribagh, Jharkhand
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Jul 2026
5 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Hazaribagh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for List Of Approved Construction Materials For The Preparation Of Schedule Of Rates For The Year 2026, Basic Rates Of Which To Be Approved By The State Level Schedule Rate Committee (Materials Should Conform To Relevant B.I.S., Mord And Mort&H Specifications). The Rates Will Be Inclusive Of Royalty But Exclusive Of All Taxes, G.S.T,Overhead And Contractors Profit. Rates Are At Sourcequarry/ Crusher Plant. , Stone Boulder Of Size 150 Mm And Below At Source Quarry , Supply Of Quarried Stone 150-200 Mm Size For Hand Broken At Source Quarry , Boulder With Minimum Size Of 300 Mm For Pitching At Source Quarry , Coarse Sand I) At Source , Coarse Sand Ii) At Source , Fine Sand At Source Quarry , Moorum At Source Quarry , Gravel/Quarry Spall At Source Quarry , Granular Material Or Hard Murum For Gsb Works At Source Quarry , Fly Ash Conforming To Is:3812 (Part Ii & I) At Hmp Plant/Batching Plant/Crushing Plant , Filter Media/Filter Material As Per Table 300-3 (Mort&H Specification) At Crusher. , Close Graded Granular Sub-Base Material 53 Mm To 9.5 Mm/4.75Mm At Crusher. , Close Graded Granular Sub-Base Material 37.5 Mm To 9.5 Mm At Crusher. , Close Graded Granular Sub-Base Material 26.5 Mm To 9.5 Mm At Crusher. , Close Graded Granular Sub-Base Material 9.5 Mm To 4.75 Mm At Crusher. , Close Graded Granular Sub-Base Material 9.5 Mm To 2.36Mm At Crusher. , Close Graded Granular Sub-Base Material 4.75Mm To 2.36Mm At Crusher. , Close Graded Granular Sub-Base Material 4.75Mm To 75 Micron At Crusher. , Close Graded Granular Sub-Base Material 2.36 Mm & Below At Crusher. , Stone Crusher Dust Finer Than 3 Mm With Not More Than 10% Passing 0.075 Mm Sieve At Crusher. , Coarse Graded Granular Sub-Base Material 2.36 Mm & Below At Crusher. , Coarse Graded Granular Sub-Base Material 4.75 Mm To 75 Micron At Crusher. , Coarse Graded Granular Sub-Base Material 4.75Mm To 2.36 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 9.5Mm To 4.75 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 26.5Mm To 4.75 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 26.5 Mm To 9.5 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 37.5 Mm To 9.5 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 53 Mm To 26.5 Mm At Crusher. , Aggregates Below 5.6 Mm At Crusher. , Aggregates 22.4 Mm To 2.36 Mm At Crusher. , Aggregates 22.4 Mm To 5.6 Mm At Crusher. , Aggregates 45 Mm To 2.8 Mm At Crusher. , Aggregates 45 Mm To 22.4 Mm At Crusher. , Aggregates 53 Mm To 2.8 Mm At Crusher. , Aggregates 53 Mm To 22.4 Mm(Grade Iii) At Crusher. , Aggregates 63 Mm To 2.8 Mm At Crusher. , Aggregates 63 Mm To 45 Mm (Grade Ii)At Crusher. , Aggregates 90 Mm To 45Mm(Grade I) At Crusher. , Aggregates 10 Mm To 5 Mm At Crusher. , Aggregates 11.2 Mm To 0.09 Mm (Key Aggregate Type B) At Crusher. , Aggregates 13.2 Mm To 0.09 Mm (Key Aggregate Type A) At Crusher. , Aggregates 13.2 Mm To 5.6 Mm At Crusher. , Aggregates 13.2 Mm To 10 Mm At Crusher. , Aggregates 20 Mm To 10 Mm At Crusher. , Aggregates 25 Mm To10 Mm At Crusher. , Aggregates 19 Mm To 6 Mm At Crusher. , Aggregates 37.5 Mm To 19 Mm At Crusher. , Aggregates 37.5 Mm To 25 Mm At Crusher. , Aggregates 6 Mm Nominal Size At Crusher. , Aggregates 10 Mm Nominal Size At Crusher Plant. , Aggregates 13.2/12.5 Mm Nominal Size At Crusher Plant. , Aggregates 20 Mm Nominal Size At Crusher Plant. , Aggregates 25 Mm Nominal Size At Crusher. , Aggregates 40 Mm Nominal Size At Crusher. , Crushing Of Stone Aggregates (Gsb Crusher Run) , Ac Pipe 100 Mm Dia , Acrylic Polymer Bonding Coat , Alluminium Paint , Aluminium Alloy Plate 2Mm Thick , Aluminium Alloy/Galvanised Steel , Aluminium Sheeting 2Mm Thick Fixed With Encapsulated Lens Type Reflective Sheeting Including 2% Towards Lettering, Cost Of Angle Iron, Cost Of Drilling Holes, Nuts, Bolts Etc.And Signs As Applicable Class-B Type Iv , Road Aluminium Stud With Micro Prismatic Lens Reflectors (With Shank) 100 X 100 Mm , Barbed Wire , Bearing (Cost Of Parts) , Bearing (Cast Steel Rocker Bearing Assembly Of 250 Tonne ) , Road Studs 100X100mm Fitted With Lense Reflectors Vide Clause Cl 804.2 Of Morth (5Th Revision) , Bearing (Elastomeric Bearing Assembly Consisting Of 7 Internal Layers Of Elastomer Bonded To 6 Nos. Internal Reinforcing Steel Laminates By The Process Of Vulcanisation) , Taking Elastomeric Bearing Of Size 500 X 400 X 96Mm, Overall Volume=19200 Cubic Cm , Bearing (Forged Steel Roller Bearing Of 250 Tonne) , Bearing (Pot Type Bearing Assembly Consisting Of A Metal Piston Supported By A Disc, Ptfe Pads Providing Sliding Surfaces Against Stainless Steel Mating Together With Cast Steel Assemblies/ Fabricated Structural Steel Assemblies Duly Painted With All Components Output=250 Tonne) , (A) Fixed Pot-Ptfe Bearing , (B) Free Pot-Ptfe Bearing , (C) Guide Slide (L) Pot-Ptfe Bearing , (D) Guide Slide (T) Pot-Ptfe Bearing , Bearing (Ptfe Sliding Plate Bearing Assembly Of 80 Tonnes ) , Bearing (Supply Of Sliding Plate Bearing Of 80 Tonne) , Bentonite , Binding Wire , Bitumen ( Cationic Emulsion ) Ex- Bokaro (R.S 1) Packed , Bitumen (Vg-30 Grade) Ex- Bokaro Packed , Bitumen (Vg-40 Grade) Ex- Bokaro Packed , Bitumen (Vg-10 Grade) Ex- Bokaro Packed , Bitumen (Cutback ) Packed Ex- Bokaro . , Bitumen (Emulsion ) Ex- Bokaro (S.S1 Complying Is8887) Packed , Bitumen (Modified Graded) Ex - Haldia (Crmb - 55) Bulk , Brick - 75A , C.I. Shoes For The Pile , Cement I) Ordinary Portland Cement (Opc) - 43 Grade , Ii) Portland Pozzolana Cement (Ppc) , Iii) Sulphate Resisting Portland Cement (Src) , Iv) Portland Slag Cement (Psc) , Cgi Sheet 0.8 Mm Thick , Cold Twisted Bars (Hysd Bars) - Fe 500 D Av. Of M-10A , Coller (Rcc) For Joints 300 Mm Dia , Compressible Fibre Board (20Mm Thick) , Connectors / Staples , Copper Plate (12M Long X 250Mm Wide) , Corrosion Resistant Structural Steel , Corrugated Sheet, 3 Mm Thick, Thrie Beam Section Railing , Credit For Excavated Rock Found Suitable For Use , Curing Compound , Delineators From Isi Certified Firm As Per The Standard Drawing Given In Irc - 79 , Earth Cost Or Compensation For Earth Taken From Private Land , Elastomeric Slab Seal Expansion Joint Assembly Manufactured By Using Chloroprene, Elastomer For Elastomeric Slab Unit Conforming To Clause 915.1 Of Irc: 83 (Part Ii) , Epoxy Compound With Accessories For Preparing Epoxy Mortar , Epoxy Mortar , Epoxy Primer , Epoxy Resin-Hardner Mix For Prime Coat , Flag Of Red Color Cloth 600 X 600 Mm , Flowering Plants , Galvanised Ms Flat Clamp , Galvanised Steel Wire Crates Of Mesh Size 100 Mm X 100 Mm Woven With 4Mm Dia. Gi Wire In Rolls Of Required Size. , Galvanised Structural Steel Plate 200 Mm Wide, 6 Mm Thick, 24 M Long , Geo Grids , Geomembrane , Geonets , Geotextile , Geotextile Filter Fabric , Gi Bolt 10 Mm Dia , Spherical Dome Nut , Grass (Doob) , Grass (Fine) , Hdpe Pipes 75Mm Dia , Hdpe Pipes 90Mm Dia , Hedge Plants , Helical Pipes 600Mm Diameter , Hot Applied Thermoplastic Compound (Sp. Gravity - 2.10) , Hts Strand , Joint Sealant Compound , Jute Netting, Open Weave, 2.5 Cm Square Opening For Seeding And Mulching , Ldo For Steam Curing , M.S. Clamps , M.S. Clamps , M.S.Shoes @ 35 Kg Per Pile Of 15 M , Mild Steel Bars (Av-M6) , Modular Strip/Box Seal Expansion Joint Including Anchorage Catering To A Horizontal Movement Beyond 70 Mm And Upto 140Mm Assembly Comprising Of Edge Beams, Central Beam, 2 Modules Chloroprene Seal, Anchorage Elements, Support And Control System, All Steel Sections Protected Against Corrosion And Installed By The Manufacturer Or His Authorised Representative , Modular Strip/Box Seal Expansion Joint Catering To A Horizontal Movement Beyond 140Mm And Upto 210Mm Box/Box Seal Joint Assembly Containing 3 Modules/Cells And Comprising Of Edge Beams, Two Central Beams, Chloroprene Seal, Anchorage Elements, Support And Control System, All Steel Sections Protected Against Corrosion And Installed By The Manufacturer Or His Authorised Representative , Nipples 12Mm,300Mm Long , Nuts And Bolts , Paint , Pavement Marking Paint , Paving Fabric , Perforated Geosynthetic Pipe 150 Mm Dia , Perforated Pipe Of Cement Concrete, Internal Dia 100 Mm , Pesticide , Pipes 200 Mm Dia, 2.5 M Long For Drainage , Plastic Sheath, 1.25 Mm Thick For Dowel Bars , Plastic Tubes 50 Mm Dia, 1.2 M High , Polymer Braids , Pre Moulded Joint Filler, 25 Mm Thick For Expansion Joint. , Pre-Coated Stone Chips Of 13.2 Mm Nominal Size , Preformed Continuous Chloroprene Elastomer Or Closed Cell Foam Sealing Element With High Tear Strength, Vulcanised In A Single Operation For The Full Length Of A Joint To Ensure Water Tightness. , Pre-Moulded Asphalt Filler Board , Pre-Packed Cement Based Polymer Concrete Of Strength 45 Mpa At 28 Days , Primer (Wall) , Quick Setting Compound , Random Rubble Stone , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 1000 Mm Dia With Spigot , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 1200 Mm Dia With Spigot , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 900 Mm Dia With Spigot , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 600 Mm Dia With Spigot , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 300 Mm Dia , Reflectorising Glass Beads , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Copper Strips) , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Galvanised Carbon Steel Strips) , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Glass Reinforced Polymer/Fibre Reinforced Polymer/Polymeric Strips) , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Stainless Steel Strips) , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Aluminium Strips) , Rivets , Sand Bags (Cost Of Sand And Empty Cement Bag) , Sapling 2 M High 25 Mm Dia , Scrap Tyres Of Size 900 X 20 , Seeds , Selected Earth (Including Royalty & Compensation Per Cum) , Separation Membrane Of Impermeable Plastic Sheeting 125 Micron Thick , Sheathing Duct , Shrubs , Sludge / Farm Yard Manure @ 0.18 Cum Per 100 Sqm At Site Of Work For Turfing , Sodium Vapour Lamp (70 Watt) , Square Rubble Coursed Stone , Steel Circular Hollow Pole Of Standard Specification For Street Lighting To Mount Light At 5 M Height Above Deck Level , Steel Circular Hollow Pole Of Standard Specification For Street Lighting To Mount Light At 9 M Height Above Road Level , Steel Drum 300 Mm Dia 1.2 M High/Empty Bitumen Drum , Steel Helmet And Cushion Block On Top Of Pile Head During Driving. , Steel Pipe 25 Mm External Dia As Per Is:1239 , Steel Pipe 50 Mm External Dia As Per Is:1239 , Steel Pipe 100 Mm External Dia As Per Is:1239 , Steel Wire Rope 20 Mm , Steel Wire Rope 40 Mm , Strip Seal Expansion Joint , Structural Steel (Av. Of M6, M8 & M9) , Super Plastisizer Admixture Is Marked As Per 9103-1999 , Synthetic Geogrids As Per Clause 3102.8 And Approved Design And Specifications. , Through And Bond Stone , Tie Rods 20Mm Diameter (500Mm Length) @2.47 Kg/M , Tiles Size 300 X 300 Mm And 25 Mm Thick , Timber , Traffic Cones With 150 Mm Reflective Sleeve , Tube Anchorage Set Complete With Bearing Plate, Permanent Wedges Etc , Unslaked Lime , Water , Water Based Cement Paint , Welded Steel Wire Fabric , Wire Mesh 50Mm X 50Mm Size Of 3Mm Wire , Wooden Ballies 2 Dia For Bracing (Sal) , Wooden Ballies 8 Dia And 9 M Long , Wooden Packing , Wooden Staff For Fastening Of Flag 25 Mm Dia, 1.0 M Long , Silica Fume , Synthetic Geogrids Ultimate Tensile Strength 100Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 150Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 200Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 250Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 300Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 350Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 400Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 500Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 600Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 700Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 800Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 900Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 1000Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 1100Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 1200Kn/Metre. , Explosive For Blasting(Gelatine80%) , Delay Detonators , Electric Detonators @1 Detonator For 1/2 Gelatin Stick Of 125 Gms Each , Detonation Fuse Coil , 3.7M Long Extension Rod Boom Hydraulic Drill Jumbo , 32 Mm Coupling Sleeve Boom Hydraulic Drill Jumbo , Difter Rod Boom Hydraulic Drill Jumbo , R32 Sank Adapter Boom Hydraulic Drill Jumbo , 45 Mm Dia Button Bit Boom Hydraulic Drill Jumbo , 51 Mm Dia Button Bit Hydraulic Drill Jumbo , Steel Fiber , Microsilica , Accelerator , Wire Mesh , Bamboos (I) 75Mm Dia 6M To 8M Long (Ii) 100Mm Dia 6M To 8M Long (Iii) 50Mm Dia Hill Bamboo , Live Stake Stump , Hard Wood Sticks , Live Sods(0.6M Length) , Live Sods(2.0 M Length) , Coal Tar Epoxy , Binding Material , Spring Post 700Mm , Spring Post 450 Mm , Water Filled Barricades Work Zone Sheeting (Trapezoidal Shape 800Mm To 1000Mm In Length, 700Mm In Height , Gi Pipe 100 Mm Dia , Bracket For G.I Pipe Fixing , Flange For G.I Pipe Fixing , Neem Cake , Supplying Sludge , Contol Center Server , Hot Standby Backup Server , Nas Video Server With Storage Minimum 70 Tb , Backup Video (Only Incidents) Server. , Graphic Display(70 Led Dlp In 3X2 Matrix) , Graphic Display Controller And Software Including Video Switches , Cctv Monitoring Workstation , Emergengy Telephone (1033)Console. , Vids-Workstation. , Administrative Workstation , Atms Operator Workstation , Cctv Joystick , Operations Laser Printer(Colour) , Operations Laser Printer(Black) , Rack 19 , Atms Control Room Software(Integrated With Vids,Atcc,Vms,Mos) , Video Management Software With Atleast 150 Vms Lic , Facility Monitoring System Controller Software , Server & Database License , Antivirus License , Ptz Camera (Including Cctv Controller) , Solar System With Ups, Battery & 12Mm Pole & Cabinet , Vids Camera (Including Image Prossesing Unit) , Warning Amber Lights With Hooters, 72 Hrs Solar Backup,5M Poles And Foundation , Cabinet , 12 M Pole (Including Manufacturing And Galvanizing) , Solar System With Ups & Batteries , Equipment,Sensor Unit, Processing Unit, Solar Power Supply And Civil Works For 4 Lanes , Solar System With Ups , Batteries. , Vms (Variable Message Sine-Mtype) , Gantry(Including Manufacturing And Galvanizing) , Solar System With Ups, Battery And Cabinet For M Type Vms , Uninterruptible Power Supply (Ups)For Server Rack(10Kva) , Uninterruptible Power Supply (Ups) For Tmc (30Kva) , Power Distribution Board (Essential & Critical Supply) , Mos Sensor Equipment (Including Mos Controller) , Cabinet , Steel Fence For Protection , 24 Core Armoured Ofc + All Accessories , 40 Mm Plb Hdpe Duct As Per Latest Tsec Specification + All Accessories , Trenching Of 1.8 Meters, Laying & Back Filling For Plb Hdpe Duct , Bi- Axial Extruded Geogrids Of Minimum Tensile Strengh 15Kn/M , Bi- Axial Extruded Geogrids Of Minimum Tensile Strengh 20Kn/M , Bi- Axial Extruded Geogrids Of Minimum Tensile Strengh 30Kn/M , Bi- Axial Extruded Geogrids Of Minimum Tensile Strengh 40Kn/M , Geosynthetic Drainage With Two Filtering Nonwoven Geotextiles Having A W Configuration As Longitudinal Parallel Channels. Minimum Thickness To Be 7.2 Mm, With Two Filtering Uv Stabilized Polypropylene Nonwoven Geotextile Of Minimum Thickness Of 0.75 Mm Having Pores Of 150 Micron And Tensile Strength Of 8.0 Kn/M And Having Plane Flow Capacity Of 2.1 L / (M.S) At Hydraulic Gradient Of 1.0 & 20 Kpa Pressure,Tensile Strength Of 18 Kn/M , With Mass Per Unit Area Of 740 Gsm. , Geosynthetic Drainage Composite Having Thermobonding A Draining Core - Hdpe Geonet Comprises Of Two Sets Of Parallel Overlayed Ribs Integrally Connected To Have A Rhomboidal Shape With A Polyethylene Film And A Nonwoven Geotextile Having Mass Per Unit Area 130 G/M2 And Tensile Strength Of 8.0 Kn/M Having In Plane Flow Capacity Of 0.7 L / (M.S) At Hydraulic Gradient Of 1.0 & 20 Kpa Pressure And Tensile Strength Of 13.5 Kn/M , With Mass Per Unit Area Of 830 Gsm, , Waste Plastic (As Per Irc:Sp:98-2013) , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 1500 Mm Dia , Acrylic Noise Barrier Sheet , Silt Fence Sheet , Fully Threaded Hot Dip Galvanised Geotechnical Bars With Casing , Centralizer , Bearing Plate 200Mm X 200Mm X 10Mm , Spherical Dome Nut , Fibre Reinforcement , Geotextile , Polyvinyl Chloride Pipe (Pvc)-90 Mm , Polyvinyl Chloride Pipe (Pvc)-110 Mm , Polyvinyl Chloride Pipe (Pvc)-135 Mm , Steel/Iron Scraps , Aluminium Sheeting Fixed With Encapsulated Lens Type Reflective Sheeting Including 2% Towards Lettering (Class-C Type Xi- 2Mm Thick) , Geocell , Geosynthetics Mat , Natural Geotextile , Fabric Form Mattress , Non-Woven Geotextile , Sr. Road Safety/Auditor/ Team Leader For Road Safety Audit , Traffic Planner For Road Safety Audit , Boarding & Loading And Per Diem For Site Visits (During Road Safety Audit) , Transportation At Site And Head Office (During Road Safety Audit) , Duty Travel To Site (During Road Safety Audit) , Collection Of Road Accident Data And Analysis Of Fatal And Grievously Injured Accident With Black Spot Identification (During Road Safety Audit) , Submission Of Gap Report (For Road Safety Audit) , Road Safety Audit Reports On All Activities Which Were Planned, Actually Executed And Planned For The Next Quarter. , Submission Of Audit Report Of Work Zone Safety (For Road Safety Audit) , Workshop Report For Road Safety Audit , Final Safety Report (For Road Safety Audit) , Cement Fly Ash Brick (Conforming To Is 12894, Size= 230 X 110 X 70 Mm, Weight Of One Brick= 3Kg, Composition: Fly Ash= 60%, Coarse Sand= 30%, Cement= 10%) Including Carriage Of Sand , Paver Block (Excluding Gst ) (I) M -35 Grade And 60 Mm Thickness (A) White , (B) Red , (C) Yellow , (Ii) M-40 Grade And 80Mm Thickness (A) White , (B) Red , (C) Yellow , Kerb-Stone Block- M30 Grade (Size 375Mm X 300Mm X150mm ) , Autoclaved Aerated Concrete (Aac) Block , (Ii)Bitumen Grade Vg 40 (30/40) Bulk Ex Haldia. , Construction Of Restaurant, Workshop, First Aid Room, Shop Etc. In Truck Parking Area Complete As Per Drg. And Direction Of The Engineer. , Providing Telephone Booth Complete As Per Specifications And Direction Of Engineer. , Providing & Fixing Tube Well, Complete As Per Drawing And Additional Specifictions. , Providing A Drinking Water Kiosk Complete As Per Drawing & Specification. , Providing And Fixing Of Litter Bins In Truck Lay Bye Locations Complete As Per Drawing Or As Directed By The Engineer. , Construction Of Toilet Block Provided With Fittings And Fixtures Complete In Truck Parking Area Complete As Per Drg. And Direction Of The Engineer. , Construction Of Open Lined U - Drain In Truck Laybye Area Complete As Shown In Drawing And Technical Specification Clause 309. , Providing Shelters For Bus Passengers As Per Drawing And Mort&H Specifications Section 300, 1500, 1600 And 1700. , Providing & Fixing Guard Railing With Tubular Steel Sections At Foot Path / Medians / Islands Etc Including Foundation Concrete And Painting With Approved Paint Etc. All Complete As Per Drawing & Mort&H Specifications Clauses 808, 300, 1500, 1700 & 1900. , Toll Booth At Tollplaza , Barrier Gates At Tollplaza For 3.2 M Wide Toll Lane , Barrier Gates At Tollplaza For 4.5 M Wide Toll Lane , Canopy , Canopy Lights Halide Lamps 150 Watt , Canopy Lights Halogen Lamps 1000 Watt , Loading Unloading Platform , Traffic Aid Post At Toll Plaza , Medical Aid Post At Toll Plaza , Vehicle Rescue Post At Toll Plaza , Ambulances At Toll Plaza , Cranesat Toll Plaza , Electronic Toll Connection (Etc Lanes) At Toll Plaza , Intercom Facility At Toll Plaza , Weigh Bridge , Car Parking Area , Generator Room , Base Maintainance Camp , Toll Plaza Equipment , Electrification And Air Conditioning For Toll Booth And Toll Plaza , Bull Nose Crash Barrier , Standby Generator At Toll Plaza , Cctv Camera Installed At Each Booth , T1 For Toll Road Start , T2 For Toll Gate 1 Km , T3 For Toll Gate 500 M And Toll Rates , T4 For Exempt Vehicles At Toll Plaza , T5 For Pictorial Description Of Toll Rates , T6 For Over Size Vehicle Lane Direction Sign At Toll Plaza , T7 Near The Toll Booths Displaying Toll Rates, Exempt Vehicles And Complaint Telephone Number & Address , T8 For Toll Road End , Picnic Area At Rest Area , Petrol Pump & Pepairing Shop At Rest Area , Buffer Zone At Rest Area , Traffic Blinker Signal (L.E.D.) , Pvc Roof Sheet At Fob , Cost Of Water Quality Monitoring , Cost Of Soil Quality Monitoring , Cost Of Ambient Air Quality , Cost Of Ambient Noise Monitoring 24 Hour Continuous , Consent To Establish (Cte) , Consent To Operate (Cto) , Compliance Submission For Consent To Establish (Cte) , Compliance Submission For Consent To Operate (Cto) , Cost Of Environmental Workshop , (I)Bitumen (Vg-30 Grade) Ex- Haldia Bulk , (Ii)Bitumen (Vg-40 Grade) Ex- Haldia Bulk , Bitumen Emulsion (M.S.) Ex- Bokaro Packed , Bitumen Cationic Emulsion (M.S.) Packed, Ex-Bokaro , 2 Component Cold Applied Plastic With Specialised Cold Plastic Primer Coating Rolled On Surfacing Material Solvent Free, High Build Two Pack Seamless, Tough, Skid Resistant, For Material To Reduce Speed With Specialised High Refractive Index Glass Beads Of Minimum Reflectivity Index Of 1.5. The Glass Bead Shall Be @ 250Gm/Sqm. Type 1 Beads (Refer Morth Specification Clause803.4.2) Which Are A Constituent Of The Basic Cold Plastics Compound Vide Table 800-9 (Morth Specification) And Type 2 Beads Are Those Which Are To Be Sprayed On The Surface Vide Clause 803.6.4 (Morth Specification)Dry/Wet Visibility And Skid Resistance Shall Be Conforming To Clause 15.5 Of Irc 35. , 5Mm Thick Anti-Glare Screen Of Ppcp/Hdpe Material. The Anti Glare Shall Be Rectangular Vane Of 220-230 Mm Wide And 600Mm Ht. The Screen Shall Have Minimum One Yellow Reflective Sheeting Band On Both Sides Of Sheet. The Reflective Band Shall Be 150Mm Ht And Conforming To Type Xi Sheeting Specifications As Per Irc 67 , 5Mm Thick Antl-Glare Screen Of Ppcp/Hdpe Material. The Anti Glare Shall Be Rectangular Vane Of 220-230 Mm Wide And 900Mm Ht. The Screen Shall Have Minimum One Yellow Reflective Sheeting Band On Both Sides Of Sheet. The Reflective Band Shall Be 150Mm Ht And Conforming To Type Xi Sheeting Specifications As Per Irc 67 , 10 Mm Thick Anti-Glare Screen Of Ppcp/Hdpe No. Material. The Anti-Glare Shall Be Rectangular Vane Of 300 Mm Wide And 650 Mm Ht. The Screen Shall Have Minimum One Yellow Reflective Sheeting Band On Both Sides Of Sheet. The Reflective Band Shall Be 150Mm Ht And Conforming To Type Xi Sheeting Specifications As Per Irc 67 , Tubular Markers 700 Mm Ht (Mini.) And Having Minimum Dia. Of 75Mm. Tubular Marker Shall Be Made Up Of Polyurethane And Flexible In Nature Conforming To Irc Sp 55 With The Minimum 50Mm Width Of 2 No. Reflective Bands To The Approaching Road Users. The Reflective Bands Shall Be Provided With White Colour Retro Reflective Sheeting Type Xi As Per Irc: 67 , Red /Yellow Unbreakable Polycarbonate Body Solar Blinker 300Mm Dia. Led Lamp Conforming To Irc:93 And Is:7537. It Shall Have Light Emitting Diode (Led) Hi Bright Technology (Compliant To En12368 Or Equivalent Bis Standard). The Signal Switching Shall Be Solid State, With Opto-Isolation. The Automatic Operation Mode Shall Have Functional Flashing Rate Avallable At 50% Duty Cycle 50 Or 60 Flashes/Minutes. The Electrical Power Supply Shall Be Solar Based 12 Vdc Operating At Ambient Temperature 0 To 55°C. The Solar Power System Shall Have In-Built Charge Controller - Low/High Cut Out, Solar Spy Module 60 Watts. Maintenance Free Battery (60Ah) (Having Back Up For Operating Blinker For 72 Hrs In Absence Of Sun Or During Rainy Or Foggy Days. The Solar System Shall Be Housed In A Weatherproof Pole Mounting Cabinet With Clamp And Mounting Accessorles. , Cement - Opc 53 Grade Confirming To Is 269 : 2015 , Tar Felt Cusion , Solar Powered Road Marker (Solar Stud): Supplying And Installation Of Solar Raised Pavement Markers Made Of Polycarbonate Moulded Body With Circular Shape, Solar Powered, Led Self-Illumination In Active Mode, 360 Degree Illumination And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face In Passive Mode. The Marker Shall Support A Load Of 20000 Kg Tested In Accordance To Astm D 4280. Its Water Resistance Shall Meet The Requirements Of Ip 65 In Accordance With Is:12063:1987 Category 2 For Protection Against Water Ingress. Colour Of Lighting Could Be Provided In Red Or Yellow (Amber) Or Green Or Blue Or Combination As Per Requirement. It Shall Have Super Bright Leds So As To Provide Long Visibility From A Distance Of More Than 800 M. Its Flashing Rate Shall Not Be Less Than 1 Hz. It Should Be Able To Give The Prescribed Performance In The Temperature Range Of -40°C To +55°C. Its Life Shall Be Not Less Than 3 Years. The Full Charge Should Provide For A Minimum Autonomy Of 50 Hours Operation. The Height, Width And Length Of The Marker Shall Not Be Less Than 10Mm X 100Mm X 100Mm. Also The Surface Diameter Of The Marker Shall Not Be Less Than 100Mm Respectively. The Weight Of Marker Shall Not Exceed 0.5 Kilograms. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive. , Mechanically Woven, Metallic Coated (Galvanized With Zinc Alloy In Accordance With Is 4826) Steel Wire Conforming To Is 280, Double Twisted, Hexagonal Shaped Wire Mesh Of Mesh Type 6X8 (D=60 Mm With Tolerance Of ± 2%) Zinc + 10% Aluminum And Coated With High Abrasion Resistant Polymer Coating Conforming To Is 16014:2024, Mesh Wire Dia 2.2/3.2 Mm (Id/Od) , Mechanically Woven, Metallic Coated (Galvanized With Zinc Alloy In Accordance With Is 4826) Steel Wire Conforming To Is 280, Double Twisted, Hexagonal Shaped Wire Mesh Of Mesh Type 8X10 (D=80 Mm With Tolerance Of ± 2%) Zinc + 10% Aluminum And Coated With High Abrasion Resistant Polymer Coating Conforming To Is 16014:2024, Mesh Wire Dia 2.7/3.7 Mm (Id/Od) , Manufactured Sand Derived From Recycled Concrete Aggregate (Rca) , Recycled Concrete Aggregate (Rca) 20 Mm Nominal Size , Recycled Concrete Aggregate (Rca) 12.5 Mm Nominal Size , Recycled Concrete Aggregate (Rca) 10 Mm Nominal Size , Recycled Aggregate (Ra) 40 Mm Nominal Size , Recycled Aggregate (Ra) 20 Mm Nominal Size , Recycled Aggregate (Ra) 10 Mm Nominal Size

BOQ

Name of Work:- List of Approved Construction Materials for the Preparation of Schedule of Rates for the Year 2026, basic rates of which to be approved by the State Level Schedule Rate Committee (Materials Should conform to relevant B.I.S., MoRD and MoRT&H Specifications). The rates will be inclusive of royalty but exclusive of all taxes, G.S.T,Overhead and Contractors profit. Rates are at sourceQuarry/ Crusher Plant.
Sl. No. Item Description
1Stone Boulder of size 150 mm and below at Source Quarry
2Supply of quarried Stone 150-200 mm size for Hand Broken at source Quarry
3Boulder with minimum size of 300 mm for Pitching at source Quarry
4Coarse sand i) at source
5Coarse sand ii) at Source
6Fine sand at Source Quarry
7Moorum at Source Quarry
8Gravel/Quarry spall at Source Quarry
9Granular Material or hard murum for GSB works at source Quarry
10Fly ash conforming to IS:3812 (Part II & I) at HMP Plant/Batching Plant/Crushing Plant
11Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) at Crusher.
12Close graded Granular sub-base Material 53 mm to 9.5 mm/4.75mm at Crusher.
13Close graded Granular sub-base Material 37.5 mm to 9.5 mm at Crusher.
14Close graded Granular sub-base Material 26.5 mm to 9.5 mm at Crusher.
15Close graded Granular sub-base Material 9.5 mm to 4.75 mm at Crusher.
16Close graded Granular sub-base Material 9.5 mm to 2.36mm at Crusher.
17Close graded Granular sub-base Material 4.75mm to 2.36mm At Crusher.
18Close graded Granular sub-base Material 4.75mm to 75 micron at Crusher.
19Close graded Granular sub-base Material 2.36 mm & below at Crusher.
20Stone crusher dust finer than 3 mm with not more than 10% passing 0.075 mm sieve at Crusher.
21Coarse graded Granular sub-base Material 2.36 mm & below At Crusher.
22Coarse graded Granular sub-base Material 4.75 mm to 75 micron at Crusher.
23Coarse graded Granular sub-base Material 4.75mm to 2.36 mm at Crusher.
24Coarse graded Granular sub-base Material 9.5mm to 4.75 mm at Crusher.
25Coarse graded Granular sub-base Material 26.5mm to 4.75 mm at Crusher.
26Coarse graded Granular sub-base Material 26.5 mm to 9.5 mm at Crusher.
27Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm at Crusher.
28Coarse graded Granular sub-base Material 53 mm to 26.5 mm at Crusher.
29Aggregates below 5.6 mm at Crusher.
30Aggregates 22.4 mm to 2.36 mm at Crusher.
31Aggregates 22.4 mm to 5.6 mm at Crusher.
32Aggregates 45 mm to 2.8 mm at Crusher.
33Aggregates 45 mm to 22.4 mm at Crusher.
34Aggregates 53 mm to 2.8 mm at Crusher.
35Aggregates 53 mm to 22.4 mm(Grade III) at Crusher.
36Aggregates 63 mm to 2.8 mm at Crusher.
37Aggregates 63 mm to 45 mm (Grade II)at Crusher.
38Aggregates 90 mm to 45mm(Grade I) at Crusher.
39Aggregates 10 mm to 5 mm at Crusher.
40Aggregates 11.2 mm to 0.09 mm (Key aggregate Type B) at Crusher.
41Aggregates 13.2 mm to 0.09 mm (Key aggregate Type A) at Crusher.
42Aggregates 13.2 mm to 5.6 mm at Crusher.
43Aggregates 13.2 mm to 10 mm at Crusher.
44Aggregates 20 mm to 10 mm at Crusher.
45Aggregates 25 mm to10 mm at Crusher.
46Aggregates 19 mm to 6 mm at Crusher.
47Aggregates 37.5 mm to 19 mm at Crusher.
48Aggregates 37.5 mm to 25 mm at Crusher.
49Aggregates 6 mm nominal size at Crusher.
50Aggregates 10 mm nominal size at Crusher plant.
51Aggregates 13.2/12.5 mm nominal size at Crusher plant.
52Aggregates 20 mm nominal size at Crusher plant.
53Aggregates 25 mm nominal size at Crusher.
54Aggregates 40 mm nominal size at Crusher.
55Crushing of Stone aggregates (GSB Crusher Run)
56AC pipe 100 mm dia
57Acrylic polymer bonding coat
58Alluminium Paint
59Aluminium alloy plate 2mm Thick
60Aluminium alloy/galvanised steel
61Aluminium sheeting 2mm thick fixed with encapsulated lens type reflective sheeting including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts etc.and signs as applicable Class-B Type IV
62Road Aluminium Stud with Micro Prismatic lens reflectors (with shank) 100 X 100 mm
63Barbed wire
64Bearing (Cost of parts)
65Bearing (Cast steel rocker bearing assembly of 250 tonne )
66Road studs 100x100mm fitted with lense reflectors vide clause cl 804.2 of MoRTH (5th Revision)
67Bearing (Elastomeric bearing assembly consisting of 7 internal layers of elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of vulcanisation)
68Taking elastomeric bearing of size 500 X 400 X 96mm, Overall volume=19200 cubic cm
69Bearing (Forged steel roller bearing of 250 tonne)
70Bearing (Pot type bearing assembly consisting of a metal piston supported by a disc, PTFE pads providing sliding surfaces against stainless steel mating together with cast steel assemblies/ fabricated structural steel assemblies duly painted with all components output=250 tonne)
71(a) Fixed POT-PTFE Bearing
72(b) Free POT-PTFE Bearing
73(c) Guide Slide (L) POT-PTFE Bearing
74(d) Guide Slide (T) POT-PTFE Bearing
75Bearing (PTFE sliding plate bearing assembly of 80 tonnes )
76Bearing (Supply of sliding plate bearing of 80 tonne)
77Bentonite
78Binding wire
79bitumen ( Cationic Emulsion ) Ex- Bokaro (R.S 1) Packed
80bitumen (VG-30 Grade) Ex- Bokaro Packed
81bitumen (VG-40 Grade) Ex- Bokaro Packed
82bitumen (VG-10 Grade) Ex- Bokaro Packed
83bitumen (Cutback ) Packed Ex- Bokaro .
84bitumen (Emulsion ) Ex- Bokaro (S.S1 complying IS8887) Packed
85bitumen (modified graded) Ex - Haldia (CRMB - 55) Bulk
86Brick - 75A
87C.I. shoes for the pile
88Cementi) Ordinary Portland Cement (OPC) - 43 Grade
89ii) Portland Pozzolana Cement (PPC)
90iii) Sulphate Resisting Portland Cement (SRC)
91iv) Portland Slag Cement (PSC)
92CGI Sheet 0.8 mm thick
93Cold twisted bars (HYSD Bars) - Fe 500 D Av. of M-10A
94Coller (RCC) for joints 300 mm dia
95Compressible Fibre Board (20mm thick)
96Connectors / Staples
97Copper Plate (12m long x 250mm wide)
98Corrosion resistant Structural steel
99Corrugated sheet, 3 mm thick, \\"Thrie\\" beam section railing
100Credit for excavated rock found suitable for use
101Curing compound
102Delineators from ISI certified firm as per the standard drawing given in IRC - 79
103Earth Cost or compensation for earth taken from private land
104Elastomeric slab seal expansion joint assembly manufactured by using chloroprene, elastomer for elastomeric slab unit conforming to clause 915.1 of IRC: 83 (part II)
105Epoxy compound with accessories for preparing epoxy mortar
106Epoxy mortar
107Epoxy primer
108Epoxy resin-hardner mix for prime coat
109Flag of red color cloth 600 x 600 mm
110Flowering Plants
111Galvanised MS flat clamp
112Galvanised steel wire crates of mesh size 100 mm x 100 mm woven with 4mm dia. GI wire in rolls of required size.
113Galvanised structural steel plate 200 mm wide, 6 mm thick, 24 m long
114Geo grids
115Geomembrane
116Geonets
117Geotextile
118Geotextile filter fabric
119GI bolt 10 mm Dia
120Spherical Dome Nut
121Grass (Doob)
122Grass (Fine)
123HDPE pipes 75mm dia
124HDPE pipes 90mm dia
125Hedge plants
126Helical pipes 600mm diameter
127Hot applied thermoplastic compound (Sp. Gravity - 2.10)
128HTS strand
129Joint Sealant Compound
130Jute netting, open weave, 2.5 cm square opening for seeding and Mulching
131LDO for steam curing
132M.S. Clamps
133M.S. Clamps
134M.S.shoes @ 35 Kg per pile of 15 m
135Mild Steel bars (Av-M6)
136Modular strip/box seal expansion joint including anchorage catering to a horizontal movement beyond 70 mm and upto 140mm assembly comprising of edge beams, central beam, 2 modules chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative
137Modular strip/box seal expansion joint catering to a horizontal movement beyond 140mm and upto 210mm box/box seal joint assembly containing 3 modules/cells and comprising of edge beams, two central beams, chloroprene seal, anchorage elements, support and control system, all steel sections protected against corrosion and installed by the manufacturer or his authorised representative
138Nipples 12mm,300mm long
139Nuts and bolts
140Paint
141Pavement Marking Paint
142Paving Fabric
143Perforated geosynthetic pipe 150 mm dia
144Perforated pipe of cement concrete, internal dia 100 mm
145Pesticide
146Pipes 200 mm dia, 2.5 m long for drainage
147Plastic sheath, 1.25 mm thick for dowel bars
148Plastic tubes 50 mm dia, 1.2 m high
149Polymer braids
150Pre moulded Joint filler, 25 mm thick for expansion joint.
151Pre-coated stone chips of 13.2 mm nominal size
152Preformed continuous chloroprene elastomer or closed cell foam sealing element with high tear strength, vulcanised in a single operation for the full length of a joint to ensure water tightness.
153Pre-moulded asphalt filler board
154Pre-packed cement based polymer concrete of strength 45 Mpa at 28 days
155Primer (Wall)
156Quick setting compound
157Random Rubble Stone
158RCC Pipe NP 4 heavy duty non presure pipe 1000 mm dia with spigot
159RCC Pipe NP 4 heavy duty non presure pipe 1200 mm dia with spigot
160RCC Pipe NP 4 heavy duty non presure pipe 900 mm dia with spigot
161RCC Pipe NP 4 heavy duty non presure pipe 600 mm dia with spigot
162RCC Pipe NP 4 heavy duty non presure pipe 300 mm dia
163Reflectorising glass beads
164Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Copper Strips)
165Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Galvanised carbon steel strips)
166Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Glass reinforced polymer/fibre reinforced polymer/polymeric strips)
167Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Stainless steel strips)
168Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Aluminium strips)
169Rivets
170Sand bags (Cost of sand and Empty cement bag)
171Sapling 2 m high 25 mm dia
172Scrap tyres of size 900 x 20
173Seeds
174Selected earth (Including royalty & compensation per cum)
175Separation Membrane of impermeable plastic sheeting 125 micron thick
176Sheathing duct
177Shrubs
178Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of work for turfing
179Sodium vapour lamp (70 watt)
180Square Rubble Coursed Stone
181Steel circular hollow pole of standard specification for street lighting to mount light at 5 m height above deck level
182Steel circular hollow pole of standard specification for street lighting to mount light at 9 m height above road level
183Steel drum 300 mm dia 1.2 m high/empty bitumen drum
184Steel helmet and cushion block on top of pile head during driving.
185Steel pipe 25 mm external dia as per IS:1239
186Steel pipe 50 mm external dia as per IS:1239
187Steel pipe 100 mm external dia as per IS:1239
188Steel wire rope 20 mm
189Steel wire rope 40 mm
190Strip seal expansion joint
191Structural Steel (Av. of M6, M8 & M9)
192Super plastisizer admixture IS marked as per 9103-1999
193Synthetic Geogrids as per clause 3102.8 and approved design and specifications.
194Through and bond stone
195Tie rods 20mm diameter (500mm length) @2.47 kg/m
196Tiles size 300 x 300 mm and 25 mm thick
197Timber
198Traffic cones with 150 mm reflective sleeve
199Tube anchorage set complete with bearing plate, permanent wedges etc
200Unslaked lime
201Water
202Water based cement paint
203Welded steel wire fabric
204Wire mesh 50mm x 50mm size of 3mm wire
205Wooden ballies 2\\" Dia for bracing (Sal)
206Wooden ballies 8\\" Dia and 9 m long
207Wooden packing
208Wooden staff for fastening of flag 25 mm dia, 1.0 m long
209Silica fume
210Synthetic Geogrids Ultimate tensile Strength 100kN/Metre.
211Synthetic Geogrids Ultimate tensile Strength 150kN/Metre.
212Synthetic Geogrids Ultimate tensile Strength 200kN/Metre.
213Synthetic Geogrids Ultimate tensile Strength 250kN/Metre.
214Synthetic Geogrids Ultimate tensile Strength 300kN/Metre.
215Synthetic Geogrids Ultimate tensile Strength 350kN/Metre.
216Synthetic Geogrids Ultimate tensile Strength 400kN/Metre.
217Synthetic Geogrids Ultimate tensile Strength 500kN/Metre.
218Synthetic Geogrids Ultimate tensile Strength 600kN/Metre.
219Synthetic Geogrids Ultimate tensile Strength 700kN/Metre.
220Synthetic Geogrids Ultimate tensile Strength 800kN/Metre.
221Synthetic Geogrids Ultimate tensile Strength 900kN/Metre.
222Synthetic Geogrids Ultimate tensile Strength 1000kN/Metre.
223Synthetic Geogrids Ultimate tensile Strength 1100kN/Metre.
224Synthetic Geogrids Ultimate tensile Strength 1200kN/Metre.
225Explosive for blasting(Gelatine80%)
226Delay Detonators
227Electric Detonators @1 detonator for 1/2 gelatin stick of 125 gms each
228Detonation Fuse coil
2293.7m long extension rod boom Hydraulic Drill jumbo
23032 mm coupling sleeve boom Hydraulic Drill jumbo
231Difter rod boom Hydraulic Drill jumbo
232R32 sank adapter boom Hydraulic Drill jumbo
23345 mm Dia Button Bit boom Hydraulic Drill jumbo
23451 mm Dia Button Bit Hydraulic Drill Jumbo
235Steel Fiber
236Microsilica
237Accelerator
238Wire mesh
239Bamboos (i) 75mm Dia 6m to 8m long (ii) 100mm Dia 6m to 8m long (iii) 50mm Dia Hill Bamboo
240Live Stake Stump
241Hard wood sticks
242Live Sods(0.6m Length)
243Live Sods(2.0 m Length)
244Coal Tar Epoxy
245Binding Material
246Spring post 700mm
247Spring post 450 mm
248Water Filled Barricades Work zone sheeting (Trapezoidal Shape 800mm to 1000mm in length, 700mm in height
249GI Pipe 100 mm Dia
250Bracket for G.I Pipe fixing
251Flange for G.I Pipe fixing
252Neem Cake
253Supplying sludge
254Contol Center Server
255Hot Standby Backup Server
256NAS Video Server with storage Minimum 70 TB
257Backup Video (Only Incidents) Server.
258Graphic Display(70'' LED DLP IN 3X2 matrix)
259Graphic Display Controller and software including Video Switches
260CCTV Monitoring Workstation
261Emergengy Telephone (1033)Console.
262VIDS-Workstation.
263Administrative Workstation
264ATMS Operator Workstation
265CCTV joystick
266Operations Laser Printer(Colour)
267Operations Laser Printer(Black)
268Rack 19''
269ATMS Control Room Software(integrated with VIDS,ATCC,VMS,MOS)
270Video Management Software with atleast 150 VMS Lic
271Facility Monitoring System Controller Software
272Server & Database license
273Antivirus license
274PTZ Camera (including CCTV Controller)
275Solar System with UPS, battery & 12mm Pole & Cabinet
276VIDS Camera (including image Prossesing unit)
277Warning amber lights with hooters, 72 Hrs solar backup,5m poles and foundation
278Cabinet
27912 m Pole (including manufacturing and galvanizing)
280Solar System with UPS & batteries
281Equipment,Sensor unit, Processing unit, Solar power supply and civil works for 4 Lanes
282Solar System with UPS , batteries.
283VMS (Variable Message Sine-Mtype)
284Gantry(including Manufacturing and galvanizing)
285Solar System with UPS, battery and Cabinet for M type VMS
286Uninterruptible Power supply (UPS)for Server Rack(10KVA)
287Uninterruptible Power supply (UPS) for TMC (30KVA)
288Power Distribution Board (Essential & Critical Supply)
289MOS sensor Equipment (including MOS Controller)
290Cabinet
291Steel fence for protection
29224 Core Armoured OFC + all accessories
29340 mm PLB HDPE duct as per latest TSEC specification + all accessories
294Trenching of 1.8 meters, Laying & Back filling for PLB HDPE duct
295Bi- Axial Extruded Geogrids of Minimum Tensile Strengh 15kN/m
296Bi- Axial Extruded Geogrids of Minimum Tensile Strengh 20kN/m
297Bi- Axial Extruded Geogrids of Minimum Tensile Strengh 30kN/m
298Bi- Axial Extruded Geogrids of Minimum Tensile Strengh 40kN/m
299Geosynthetic Drainage with two filtering nonwoven geotextileshaving a “W” configuration as longitudinal parallel channels. Minimumthickness to be 7.2 mm, with two filtering UV stabilized polypropylenenonwoven geotextile of minimum thickness of 0.75 mm having poresof 150 micron and tensile strength of 8.0 kN/m and having planeflow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPapressure,tensile strength of 18 kN/m , with mass per unit area of 740gsm.
300Geosynthetic Drainage Composite having thermobonding a drainingcore - HDPE geonet comprises of two sets of parallel overlayed ribsintegrally connected to have a rhomboidal shape with a polyethylenefilm and a nonwoven geotextile having mass per unit area 130 g/m2and tensile strength of 8.0 kN/m having in plane flow capacity of 0.7L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensilestrength of 13.5 kN/m , with mass per unit area of 830 gsm,
301Waste Plastic (as per IRC:SP:98-2013)
302RCC Pipe NP 4 heavy duty non presure pipe 1500 mm dia
303Acrylic noise barrier sheet
304Silt Fence Sheet
305Fully Threaded Hot Dip galvanised geotechnical bars with casing
306Centralizer
307Bearing Plate 200mm x 200mm x 10mm
308Spherical dome nut
309Fibre Reinforcement
310Geotextile
311Polyvinyl Chloride Pipe (PVC)-90 mm
312Polyvinyl Chloride Pipe (PVC)-110 mm
313Polyvinyl Chloride Pipe (PVC)-135 mm
314Steel/Iron Scraps
315Aluminium sheeting fixed with encapsulated lens type reflective sheeting including 2% towards lettering (Class-C Type XI- 2mm thick)
316Geocell
317Geosynthetics mat
318Natural geotextile
319Fabric Form mattress
320Non-Woven Geotextile
321Sr. Road Safety/Auditor/ Team Leader for Road Safety Audit
322Traffic Planner for Road Safety Audit
323Boarding & Loading and Per Diem for Site Visits (During Road Safety Audit)
324Transportation at site and Head Office (During Road Safety Audit)
325Duty travel to Site (During Road Safety Audit)
326Collection of Road accident data and analysis of fatal and grievously injured accident with black spot identification (During Road Safety Audit)
327Submission of GAP report (For Road Safety Audit)
328Road Safety Audit Reports on all activities which were planned, actually executed and planned for the next quarter.
329Submission of Audit Report of work zone safety (for Road Safety Audit)
330Workshop Report for Road Safety Audit
331Final Safety Report (for road safety Audit)
332Cement Fly Ash Brick (Conforming to IS 12894, size= 230 X 110 X 70 mm, weight of one brick= 3Kg, composition: Fly ash= 60%, Coarse sand= 30%, Cement= 10%) including carriage of sand
333Paver Block (Excluding GST )(i) M -35 Grade and 60 mm thickness (a) White
334(b) Red
335(C) Yellow
336(ii) M-40 Grade and 80mm thickness (a) White
337(b) Red
338(C) Yellow
339Kerb-Stone Block- M30 Grade (Size 375mm x 300mm x150mm )
340Autoclaved Aerated Concrete (AAC) Block
341(ii)bitumen grade VG 40 (30/40) BULK Ex HALDIA.
342Construction of restaurant, workshop, first aid room, shop etc. in truck parking area complete as per drg. and direction of the Engineer.
343Providing Telephone booth complete as per specifications and direction of Engineer.
344Providing & fixing tube well, complete as per drawing and additional specifictions.
345Providing a Drinking Water Kiosk complete as per drawing & specification.
346Providing and fixing of litter bins in Truck lay Bye locations complete as per drawing or as directed by the engineer.
347Construction of toilet block provided with fittings and fixtures complete in truck parking area complete as per drg. and direction of the Engineer.
348Construction of Open lined U - Drain in truck laybye area complete as shown in drawing and technical specification clause 309.
349Providing shelters for bus passengers as per drawing and MORT&H Specifications section 300, 1500, 1600 and 1700.
350Providing & fixing guard railing with tubular steel sections at foot path / medians / islands etc including foundation concrete and painting with approved paint etc. all complete as per drawing & MORT&H Specifications Clauses 808, 300, 1500, 1700 & 1900.
351Toll Booth at Tollplaza
352Barrier gates at Tollplaza For 3.2 m wide toll lane
353Barrier gates at Tollplaza For 4.5 m wide toll lane
354Canopy
355Canopy Lights Halide lamps 150 watt
356Canopy Lights Halogen lamps 1000 watt
357Loading Unloading Platform
358Traffic Aid Post at Toll Plaza
359Medical Aid Post at Toll Plaza
360Vehicle Rescue Post at Toll Plaza
361Ambulances at Toll Plaza
362Cranesat Toll Plaza
363Electronic Toll Connection (ETC lanes) at Toll Plaza
364Intercom facility at Toll Plaza
365Weigh Bridge
366Car Parking area
367Generator room
368Base Maintainance Camp
369Toll plaza equipment
370Electrification And Air conditioning for toll Booth and toll Plaza
371Bull nose crash barrier
372Standby Generator at Toll Plaza
373CCTV camera installed at each booth
374T1 for Toll Road Start
375T2 for Toll Gate 1 Km
376T3 for Toll Gate 500 m and toll rates
377T4 for exempt vehicles at Toll Plaza
378T5 for pictorial description of toll rates
379T6 for over size vehicle lane direction sign at Toll Plaza
380T7 near the Toll booths displaying Toll Rates, exempt vehicles and complaint telephone number & address
381T8 for Toll Road End
382Picnic Area at Rest Area
383Petrol Pump & Pepairing Shop at Rest Area
384Buffer Zone at Rest Area
385Traffic blinker Signal (L.E.D.)
386PVC Roof Sheet at FOB
387Cost of Water Quality Monitoring
388Cost of Soil Quality Monitoring
389Cost of Ambient Air Quality
390Cost of Ambient Noise Monitoring 24 hour continuous
391Consent to Establish (CTE)
392Consent to Operate (CTO)
393Compliance submission for Consent to Establish (CTE)
394Compliance submission for Consent to Operate (CTO)
395Cost of Environmental Workshop
396(i)bitumen (VG-30 Grade) Ex- Haldia Bulk
397(ii)bitumen (VG-40 Grade) Ex- Haldia Bulk
398bitumen Emulsion (M.S.) Ex- Bokaro Packed
399Bitumen Cationic Emulsion (M.S.) Packed, Ex-Bokaro
4002 component Cold Applied plastic with specialised cold plastic Primer coating rolled on surfacing material solvent free, high build two pack seamless, tough, skid resistant, for material to reduce speed with specialised high refractive index glass beads of minimum reflectivity index of 1.5. The glass bead shall be @ 250gm/sqm. Type 1 beads (Refer MoRTH Specification Clause803.4.2) which are a constituent of the basic cold plastics compound vide Table 800-9 (MoRTH Specification) and Type 2 beads are those which are to be sprayed on the surface vide Clause 803.6.4 (MoRTH Specification)Dry/Wet visibility and skid resistance shall be conforming to clause 15.5 of IRC 35.
4015mm thick anti-glare screen of PPCP/HDPE material. The anti glare shall be rectangular vane of 220-230 mm wide and 600mm ht. The screen shall have minimum one yellow reflective sheeting band on both sides of sheet. The reflective band shall be 150mm ht and conforming to type XI sheeting specifications as per IRC 67
4025mm thick antl-glare screen of PPCP/HDPE material. The anti glare shall be rectangular vane of 220-230 mm wide and 900mm ht. The screen shall have minimum one yellow reflective sheeting band on both sides of sheet. The reflective band shall be 150mm ht and conforming to type XI sheeting specifications as per IRC 67
40310 mm thick anti-glare screen of PPCP/HDPE No. material. The anti-glare shall be rectangular vane of 300 mm wide and 650 mm ht. The screen shall have minimum one yellow reflective sheeting band on both sides of sheet. The reflective band shall be 150mm ht and conforming to type XI sheeting specifications as per IRC 67
404Tubular markers 700 mm ht (mini.) and having minimum dia. of 75mm. Tubular Marker shall be made up of polyurethane and flexible in nature conforming to IRC SP 55 with the minimum 50mm width of 2 no. reflective bands to the approaching road users. The reflective bands shall be provided with white colour retro reflective sheeting Type XI as per IRC: 67
405Red /Yellow unbreakable polycarbonate body Solar Blinker 300mm dia. LED lamp conforming to IRC:93 and IS:7537. It shall have Light Emitting Diode (LED) Hi Bright technology (Compliant to EN12368 or equivalent BIS standard). The Signal Switching shall be Solid State, with Opto-isolation. The Automatic operation mode shall have functional flashing rate avallable at 50% Duty Cycle 50 or 60 Flashes/minutes. The Electrical Power Supply shall be solar based 12 VDC operating at Ambient Temperature 0 to 55°C. The solar power system shall have in-built charge Controller - Low/High cut out, Solar SPY Module 60 Watts. Maintenance Free Battery (60AH) (having back up for operating blinker for 72 Hrs in absence of Sun or during rainy or foggy days. The Solar System shall be housed in a weatherproof pole mounting cabinet with clamp and mounting accessorles.
406Cement - OPC 53 Grade confirming to IS 269 : 2015
407Tar Felt Cusion
408Solar Powered Road marker (Solar Stud): Supplying and installation of Solar Raised Pavement Markers made of polycarbonate moulded body with circular shape, solar powered, LED self-illumination in active mode, 360 degree illumination and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face in passive mode. The marker shall support a load of 20000 kg tested in accordance to ASTM D 4280. Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 Category 2 for protection against water ingress. Colour of lighting could be provided in red or yellow (amber) or green or blue or combination as per requirement. It shall have super bright LEDs so as to provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. It should be able to give the prescribed performance in the temperature range of -40°C to +55°C. Its life shall be not less than 3 years. The full charge should provide for a minimum autonomy of 50 hours operation. The height, width and length of the marker shall not be less than 10mm x 100mm x 100mm. Also the surface diameter of the marker shall not be less than 100mm respectively. The weight of marker shall not exceed 0.5 kilograms. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive.
409Mechanically woven, metallic coated (galvanized with zinc alloy in accordance with IS 4826) steel wire conforming to IS 280, Double Twisted, Hexagonal Shaped Wire mesh of Mesh type 6X8 (D=60 mm with tolerance of ± 2%) Zinc + 10% Aluminum and coated with High Abrasion Resistant Polymer coating conforming to IS 16014:2024, Mesh wire dia 2.2/3.2 mm (ID/OD)
410Mechanically woven, metallic coated (galvanized with zinc alloy in accordance with IS 4826) steel wire conforming to IS 280, Double Twisted, Hexagonal Shaped Wire mesh of Mesh type 8X10 (D=80 mm with tolerance of ± 2%) Zinc + 10% Aluminum and coated with High Abrasion Resistant Polymer coating conforming to IS 16014:2024, Mesh wire dia 2.7/3.7 mm (ID/OD)
411Manufactured sand derived from Recycled Concrete Aggregate (RCA)
412Recycled Concrete Aggregate (RCA) 20 mm nominal size
413Recycled Concrete Aggregate (RCA) 12.5 mm nominal size
414Recycled Concrete Aggregate (RCA) 10 mm nominal size
415Recycled Aggregate (RA) 40 mm nominal size
416Recycled Aggregate (RA) 20 mm nominal size
417Recycled Aggregate (RA) 10 mm nominal size Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 56302889
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 10-07-2026
Authority
Authority Name Road Construction Department
Work Description Tender for List Of Approved Construction Materials For The Preparation Of Schedule Of Rates For The Year 2026, Basic Rates Of Which To Be Approved By The State Level Schedule Rate Committee (Materials Should Conform To Relevant B.I.S., Mord And Mort&H Specifications). The Rates Will Be Inclusive Of Royalty But Exclusive Of All Taxes, G.S.T,Overhead And Contractors Profit. Rates Are At Sourcequarry/ Crusher Plant. , Stone Boulder Of Size 150 Mm And Below At Source Quarry , Supply Of Quarried Stone 150-200 Mm Size For Hand Broken At Source Quarry , Boulder With Minimum Size Of 300 Mm For Pitching At Source Quarry , Coarse Sand I) At Source , Coarse Sand Ii) At Source , Fine Sand At Source Quarry , Moorum At Source Quarry , Gravel/Quarry Spall At Source Quarry , Granular Material Or Hard Murum For Gsb Works At Source Quarry , Fly Ash Conforming To Is:3812 (Part Ii & I) At Hmp Plant/Batching Plant/Crushing Plant , Filter Media/Filter Material As Per Table 300-3 (Mort&H Specification) At Crusher. , Close Graded Granular Sub-Base Material 53 Mm To 9.5 Mm/4.75Mm At Crusher. , Close Graded Granular Sub-Base Material 37.5 Mm To 9.5 Mm At Crusher. , Close Graded Granular Sub-Base Material 26.5 Mm To 9.5 Mm At Crusher. , Close Graded Granular Sub-Base Material 9.5 Mm To 4.75 Mm At Crusher. , Close Graded Granular Sub-Base Material 9.5 Mm To 2.36Mm At Crusher. , Close Graded Granular Sub-Base Material 4.75Mm To 2.36Mm At Crusher. , Close Graded Granular Sub-Base Material 4.75Mm To 75 Micron At Crusher. , Close Graded Granular Sub-Base Material 2.36 Mm & Below At Crusher. , Stone Crusher Dust Finer Than 3 Mm With Not More Than 10% Passing 0.075 Mm Sieve At Crusher. , Coarse Graded Granular Sub-Base Material 2.36 Mm & Below At Crusher. , Coarse Graded Granular Sub-Base Material 4.75 Mm To 75 Micron At Crusher. , Coarse Graded Granular Sub-Base Material 4.75Mm To 2.36 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 9.5Mm To 4.75 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 26.5Mm To 4.75 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 26.5 Mm To 9.5 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 37.5 Mm To 9.5 Mm At Crusher. , Coarse Graded Granular Sub-Base Material 53 Mm To 26.5 Mm At Crusher. , Aggregates Below 5.6 Mm At Crusher. , Aggregates 22.4 Mm To 2.36 Mm At Crusher. , Aggregates 22.4 Mm To 5.6 Mm At Crusher. , Aggregates 45 Mm To 2.8 Mm At Crusher. , Aggregates 45 Mm To 22.4 Mm At Crusher. , Aggregates 53 Mm To 2.8 Mm At Crusher. , Aggregates 53 Mm To 22.4 Mm(Grade Iii) At Crusher. , Aggregates 63 Mm To 2.8 Mm At Crusher. , Aggregates 63 Mm To 45 Mm (Grade Ii)At Crusher. , Aggregates 90 Mm To 45Mm(Grade I) At Crusher. , Aggregates 10 Mm To 5 Mm At Crusher. , Aggregates 11.2 Mm To 0.09 Mm (Key Aggregate Type B) At Crusher. , Aggregates 13.2 Mm To 0.09 Mm (Key Aggregate Type A) At Crusher. , Aggregates 13.2 Mm To 5.6 Mm At Crusher. , Aggregates 13.2 Mm To 10 Mm At Crusher. , Aggregates 20 Mm To 10 Mm At Crusher. , Aggregates 25 Mm To10 Mm At Crusher. , Aggregates 19 Mm To 6 Mm At Crusher. , Aggregates 37.5 Mm To 19 Mm At Crusher. , Aggregates 37.5 Mm To 25 Mm At Crusher. , Aggregates 6 Mm Nominal Size At Crusher. , Aggregates 10 Mm Nominal Size At Crusher Plant. , Aggregates 13.2/12.5 Mm Nominal Size At Crusher Plant. , Aggregates 20 Mm Nominal Size At Crusher Plant. , Aggregates 25 Mm Nominal Size At Crusher. , Aggregates 40 Mm Nominal Size At Crusher. , Crushing Of Stone Aggregates (Gsb Crusher Run) , Ac Pipe 100 Mm Dia , Acrylic Polymer Bonding Coat , Alluminium Paint , Aluminium Alloy Plate 2Mm Thick , Aluminium Alloy/Galvanised Steel , Aluminium Sheeting 2Mm Thick Fixed With Encapsulated Lens Type Reflective Sheeting Including 2% Towards Lettering, Cost Of Angle Iron, Cost Of Drilling Holes, Nuts, Bolts Etc.And Signs As Applicable Class-B Type Iv , Road Aluminium Stud With Micro Prismatic Lens Reflectors (With Shank) 100 X 100 Mm , Barbed Wire , Bearing (Cost Of Parts) , Bearing (Cast Steel Rocker Bearing Assembly Of 250 Tonne ) , Road Studs 100X100mm Fitted With Lense Reflectors Vide Clause Cl 804.2 Of Morth (5Th Revision) , Bearing (Elastomeric Bearing Assembly Consisting Of 7 Internal Layers Of Elastomer Bonded To 6 Nos. Internal Reinforcing Steel Laminates By The Process Of Vulcanisation) , Taking Elastomeric Bearing Of Size 500 X 400 X 96Mm, Overall Volume=19200 Cubic Cm , Bearing (Forged Steel Roller Bearing Of 250 Tonne) , Bearing (Pot Type Bearing Assembly Consisting Of A Metal Piston Supported By A Disc, Ptfe Pads Providing Sliding Surfaces Against Stainless Steel Mating Together With Cast Steel Assemblies/ Fabricated Structural Steel Assemblies Duly Painted With All Components Output=250 Tonne) , (A) Fixed Pot-Ptfe Bearing , (B) Free Pot-Ptfe Bearing , (C) Guide Slide (L) Pot-Ptfe Bearing , (D) Guide Slide (T) Pot-Ptfe Bearing , Bearing (Ptfe Sliding Plate Bearing Assembly Of 80 Tonnes ) , Bearing (Supply Of Sliding Plate Bearing Of 80 Tonne) , Bentonite , Binding Wire , Bitumen ( Cationic Emulsion ) Ex- Bokaro (R.S 1) Packed , Bitumen (Vg-30 Grade) Ex- Bokaro Packed , Bitumen (Vg-40 Grade) Ex- Bokaro Packed , Bitumen (Vg-10 Grade) Ex- Bokaro Packed , Bitumen (Cutback ) Packed Ex- Bokaro . , Bitumen (Emulsion ) Ex- Bokaro (S.S1 Complying Is8887) Packed , Bitumen (Modified Graded) Ex - Haldia (Crmb - 55) Bulk , Brick - 75A , C.I. Shoes For The Pile , Cement I) Ordinary Portland Cement (Opc) - 43 Grade , Ii) Portland Pozzolana Cement (Ppc) , Iii) Sulphate Resisting Portland Cement (Src) , Iv) Portland Slag Cement (Psc) , Cgi Sheet 0.8 Mm Thick , Cold Twisted Bars (Hysd Bars) - Fe 500 D Av. Of M-10A , Coller (Rcc) For Joints 300 Mm Dia , Compressible Fibre Board (20Mm Thick) , Connectors / Staples , Copper Plate (12M Long X 250Mm Wide) , Corrosion Resistant Structural Steel , Corrugated Sheet, 3 Mm Thick, Thrie Beam Section Railing , Credit For Excavated Rock Found Suitable For Use , Curing Compound , Delineators From Isi Certified Firm As Per The Standard Drawing Given In Irc - 79 , Earth Cost Or Compensation For Earth Taken From Private Land , Elastomeric Slab Seal Expansion Joint Assembly Manufactured By Using Chloroprene, Elastomer For Elastomeric Slab Unit Conforming To Clause 915.1 Of Irc: 83 (Part Ii) , Epoxy Compound With Accessories For Preparing Epoxy Mortar , Epoxy Mortar , Epoxy Primer , Epoxy Resin-Hardner Mix For Prime Coat , Flag Of Red Color Cloth 600 X 600 Mm , Flowering Plants , Galvanised Ms Flat Clamp , Galvanised Steel Wire Crates Of Mesh Size 100 Mm X 100 Mm Woven With 4Mm Dia. Gi Wire In Rolls Of Required Size. , Galvanised Structural Steel Plate 200 Mm Wide, 6 Mm Thick, 24 M Long , Geo Grids , Geomembrane , Geonets , Geotextile , Geotextile Filter Fabric , Gi Bolt 10 Mm Dia , Spherical Dome Nut , Grass (Doob) , Grass (Fine) , Hdpe Pipes 75Mm Dia , Hdpe Pipes 90Mm Dia , Hedge Plants , Helical Pipes 600Mm Diameter , Hot Applied Thermoplastic Compound (Sp. Gravity - 2.10) , Hts Strand , Joint Sealant Compound , Jute Netting, Open Weave, 2.5 Cm Square Opening For Seeding And Mulching , Ldo For Steam Curing , M.S. Clamps , M.S. Clamps , M.S.Shoes @ 35 Kg Per Pile Of 15 M , Mild Steel Bars (Av-M6) , Modular Strip/Box Seal Expansion Joint Including Anchorage Catering To A Horizontal Movement Beyond 70 Mm And Upto 140Mm Assembly Comprising Of Edge Beams, Central Beam, 2 Modules Chloroprene Seal, Anchorage Elements, Support And Control System, All Steel Sections Protected Against Corrosion And Installed By The Manufacturer Or His Authorised Representative , Modular Strip/Box Seal Expansion Joint Catering To A Horizontal Movement Beyond 140Mm And Upto 210Mm Box/Box Seal Joint Assembly Containing 3 Modules/Cells And Comprising Of Edge Beams, Two Central Beams, Chloroprene Seal, Anchorage Elements, Support And Control System, All Steel Sections Protected Against Corrosion And Installed By The Manufacturer Or His Authorised Representative , Nipples 12Mm,300Mm Long , Nuts And Bolts , Paint , Pavement Marking Paint , Paving Fabric , Perforated Geosynthetic Pipe 150 Mm Dia , Perforated Pipe Of Cement Concrete, Internal Dia 100 Mm , Pesticide , Pipes 200 Mm Dia, 2.5 M Long For Drainage , Plastic Sheath, 1.25 Mm Thick For Dowel Bars , Plastic Tubes 50 Mm Dia, 1.2 M High , Polymer Braids , Pre Moulded Joint Filler, 25 Mm Thick For Expansion Joint. , Pre-Coated Stone Chips Of 13.2 Mm Nominal Size , Preformed Continuous Chloroprene Elastomer Or Closed Cell Foam Sealing Element With High Tear Strength, Vulcanised In A Single Operation For The Full Length Of A Joint To Ensure Water Tightness. , Pre-Moulded Asphalt Filler Board , Pre-Packed Cement Based Polymer Concrete Of Strength 45 Mpa At 28 Days , Primer (Wall) , Quick Setting Compound , Random Rubble Stone , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 1000 Mm Dia With Spigot , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 1200 Mm Dia With Spigot , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 900 Mm Dia With Spigot , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 600 Mm Dia With Spigot , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 300 Mm Dia , Reflectorising Glass Beads , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Copper Strips) , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Galvanised Carbon Steel Strips) , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Glass Reinforced Polymer/Fibre Reinforced Polymer/Polymeric Strips) , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Stainless Steel Strips) , Reinforcement Strips 60 Mm Wide 5 Mm Thick As Per Clause 3102. (Aluminium Strips) , Rivets , Sand Bags (Cost Of Sand And Empty Cement Bag) , Sapling 2 M High 25 Mm Dia , Scrap Tyres Of Size 900 X 20 , Seeds , Selected Earth (Including Royalty & Compensation Per Cum) , Separation Membrane Of Impermeable Plastic Sheeting 125 Micron Thick , Sheathing Duct , Shrubs , Sludge / Farm Yard Manure @ 0.18 Cum Per 100 Sqm At Site Of Work For Turfing , Sodium Vapour Lamp (70 Watt) , Square Rubble Coursed Stone , Steel Circular Hollow Pole Of Standard Specification For Street Lighting To Mount Light At 5 M Height Above Deck Level , Steel Circular Hollow Pole Of Standard Specification For Street Lighting To Mount Light At 9 M Height Above Road Level , Steel Drum 300 Mm Dia 1.2 M High/Empty Bitumen Drum , Steel Helmet And Cushion Block On Top Of Pile Head During Driving. , Steel Pipe 25 Mm External Dia As Per Is:1239 , Steel Pipe 50 Mm External Dia As Per Is:1239 , Steel Pipe 100 Mm External Dia As Per Is:1239 , Steel Wire Rope 20 Mm , Steel Wire Rope 40 Mm , Strip Seal Expansion Joint , Structural Steel (Av. Of M6, M8 & M9) , Super Plastisizer Admixture Is Marked As Per 9103-1999 , Synthetic Geogrids As Per Clause 3102.8 And Approved Design And Specifications. , Through And Bond Stone , Tie Rods 20Mm Diameter (500Mm Length) @2.47 Kg/M , Tiles Size 300 X 300 Mm And 25 Mm Thick , Timber , Traffic Cones With 150 Mm Reflective Sleeve , Tube Anchorage Set Complete With Bearing Plate, Permanent Wedges Etc , Unslaked Lime , Water , Water Based Cement Paint , Welded Steel Wire Fabric , Wire Mesh 50Mm X 50Mm Size Of 3Mm Wire , Wooden Ballies 2 Dia For Bracing (Sal) , Wooden Ballies 8 Dia And 9 M Long , Wooden Packing , Wooden Staff For Fastening Of Flag 25 Mm Dia, 1.0 M Long , Silica Fume , Synthetic Geogrids Ultimate Tensile Strength 100Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 150Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 200Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 250Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 300Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 350Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 400Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 500Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 600Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 700Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 800Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 900Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 1000Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 1100Kn/Metre. , Synthetic Geogrids Ultimate Tensile Strength 1200Kn/Metre. , Explosive For Blasting(Gelatine80%) , Delay Detonators , Electric Detonators @1 Detonator For 1/2 Gelatin Stick Of 125 Gms Each , Detonation Fuse Coil , 3.7M Long Extension Rod Boom Hydraulic Drill Jumbo , 32 Mm Coupling Sleeve Boom Hydraulic Drill Jumbo , Difter Rod Boom Hydraulic Drill Jumbo , R32 Sank Adapter Boom Hydraulic Drill Jumbo , 45 Mm Dia Button Bit Boom Hydraulic Drill Jumbo , 51 Mm Dia Button Bit Hydraulic Drill Jumbo , Steel Fiber , Microsilica , Accelerator , Wire Mesh , Bamboos (I) 75Mm Dia 6M To 8M Long (Ii) 100Mm Dia 6M To 8M Long (Iii) 50Mm Dia Hill Bamboo , Live Stake Stump , Hard Wood Sticks , Live Sods(0.6M Length) , Live Sods(2.0 M Length) , Coal Tar Epoxy , Binding Material , Spring Post 700Mm , Spring Post 450 Mm , Water Filled Barricades Work Zone Sheeting (Trapezoidal Shape 800Mm To 1000Mm In Length, 700Mm In Height , Gi Pipe 100 Mm Dia , Bracket For G.I Pipe Fixing , Flange For G.I Pipe Fixing , Neem Cake , Supplying Sludge , Contol Center Server , Hot Standby Backup Server , Nas Video Server With Storage Minimum 70 Tb , Backup Video (Only Incidents) Server. , Graphic Display(70 Led Dlp In 3X2 Matrix) , Graphic Display Controller And Software Including Video Switches , Cctv Monitoring Workstation , Emergengy Telephone (1033)Console. , Vids-Workstation. , Administrative Workstation , Atms Operator Workstation , Cctv Joystick , Operations Laser Printer(Colour) , Operations Laser Printer(Black) , Rack 19 , Atms Control Room Software(Integrated With Vids,Atcc,Vms,Mos) , Video Management Software With Atleast 150 Vms Lic , Facility Monitoring System Controller Software , Server & Database License , Antivirus License , Ptz Camera (Including Cctv Controller) , Solar System With Ups, Battery & 12Mm Pole & Cabinet , Vids Camera (Including Image Prossesing Unit) , Warning Amber Lights With Hooters, 72 Hrs Solar Backup,5M Poles And Foundation , Cabinet , 12 M Pole (Including Manufacturing And Galvanizing) , Solar System With Ups & Batteries , Equipment,Sensor Unit, Processing Unit, Solar Power Supply And Civil Works For 4 Lanes , Solar System With Ups , Batteries. , Vms (Variable Message Sine-Mtype) , Gantry(Including Manufacturing And Galvanizing) , Solar System With Ups, Battery And Cabinet For M Type Vms , Uninterruptible Power Supply (Ups)For Server Rack(10Kva) , Uninterruptible Power Supply (Ups) For Tmc (30Kva) , Power Distribution Board (Essential & Critical Supply) , Mos Sensor Equipment (Including Mos Controller) , Cabinet , Steel Fence For Protection , 24 Core Armoured Ofc + All Accessories , 40 Mm Plb Hdpe Duct As Per Latest Tsec Specification + All Accessories , Trenching Of 1.8 Meters, Laying & Back Filling For Plb Hdpe Duct , Bi- Axial Extruded Geogrids Of Minimum Tensile Strengh 15Kn/M , Bi- Axial Extruded Geogrids Of Minimum Tensile Strengh 20Kn/M , Bi- Axial Extruded Geogrids Of Minimum Tensile Strengh 30Kn/M , Bi- Axial Extruded Geogrids Of Minimum Tensile Strengh 40Kn/M , Geosynthetic Drainage With Two Filtering Nonwoven Geotextiles Having A W Configuration As Longitudinal Parallel Channels. Minimum Thickness To Be 7.2 Mm, With Two Filtering Uv Stabilized Polypropylene Nonwoven Geotextile Of Minimum Thickness Of 0.75 Mm Having Pores Of 150 Micron And Tensile Strength Of 8.0 Kn/M And Having Plane Flow Capacity Of 2.1 L / (M.S) At Hydraulic Gradient Of 1.0 & 20 Kpa Pressure,Tensile Strength Of 18 Kn/M , With Mass Per Unit Area Of 740 Gsm. , Geosynthetic Drainage Composite Having Thermobonding A Draining Core - Hdpe Geonet Comprises Of Two Sets Of Parallel Overlayed Ribs Integrally Connected To Have A Rhomboidal Shape With A Polyethylene Film And A Nonwoven Geotextile Having Mass Per Unit Area 130 G/M2 And Tensile Strength Of 8.0 Kn/M Having In Plane Flow Capacity Of 0.7 L / (M.S) At Hydraulic Gradient Of 1.0 & 20 Kpa Pressure And Tensile Strength Of 13.5 Kn/M , With Mass Per Unit Area Of 830 Gsm, , Waste Plastic (As Per Irc:Sp:98-2013) , Reinforced Cement Concrete Pipe Np 4 Heavy Duty Non Presure Pipe 1500 Mm Dia , Acrylic Noise Barrier Sheet , Silt Fence Sheet , Fully Threaded Hot Dip Galvanised Geotechnical Bars With Casing , Centralizer , Bearing Plate 200Mm X 200Mm X 10Mm , Spherical Dome Nut , Fibre Reinforcement , Geotextile , Polyvinyl Chloride Pipe (Pvc)-90 Mm , Polyvinyl Chloride Pipe (Pvc)-110 Mm , Polyvinyl Chloride Pipe (Pvc)-135 Mm , Steel/Iron Scraps , Aluminium Sheeting Fixed With Encapsulated Lens Type Reflective Sheeting Including 2% Towards Lettering (Class-C Type Xi- 2Mm Thick) , Geocell , Geosynthetics Mat , Natural Geotextile , Fabric Form Mattress , Non-Woven Geotextile , Sr. Road Safety/Auditor/ Team Leader For Road Safety Audit , Traffic Planner For Road Safety Audit , Boarding & Loading And Per Diem For Site Visits (During Road Safety Audit) , Transportation At Site And Head Office (During Road Safety Audit) , Duty Travel To Site (During Road Safety Audit) , Collection Of Road Accident Data And Analysis Of Fatal And Grievously Injured Accident With Black Spot Identification (During Road Safety Audit) , Submission Of Gap Report (For Road Safety Audit) , Road Safety Audit Reports On All Activities Which Were Planned, Actually Executed And Planned For The Next Quarter. , Submission Of Audit Report Of Work Zone Safety (For Road Safety Audit) , Workshop Report For Road Safety Audit , Final Safety Report (For Road Safety Audit) , Cement Fly Ash Brick (Conforming To Is 12894, Size= 230 X 110 X 70 Mm, Weight Of One Brick= 3Kg, Composition: Fly Ash= 60%, Coarse Sand= 30%, Cement= 10%) Including Carriage Of Sand , Paver Block (Excluding Gst ) (I) M -35 Grade And 60 Mm Thickness (A) White , (B) Red , (C) Yellow , (Ii) M-40 Grade And 80Mm Thickness (A) White , (B) Red , (C) Yellow , Kerb-Stone Block- M30 Grade (Size 375Mm X 300Mm X150mm ) , Autoclaved Aerated Concrete (Aac) Block , (Ii)Bitumen Grade Vg 40 (30/40) Bulk Ex Haldia. , Construction Of Restaurant, Workshop, First Aid Room, Shop Etc. In Truck Parking Area Complete As Per Drg. And Direction Of The Engineer. , Providing Telephone Booth Complete As Per Specifications And Direction Of Engineer. , Providing & Fixing Tube Well, Complete As Per Drawing And Additional Specifictions. , Providing A Drinking Water Kiosk Complete As Per Drawing & Specification. , Providing And Fixing Of Litter Bins In Truck Lay Bye Locations Complete As Per Drawing Or As Directed By The Engineer. , Construction Of Toilet Block Provided With Fittings And Fixtures Complete In Truck Parking Area Complete As Per Drg. And Direction Of The Engineer. , Construction Of Open Lined U - Drain In Truck Laybye Area Complete As Shown In Drawing And Technical Specification Clause 309. , Providing Shelters For Bus Passengers As Per Drawing And Mort&H Specifications Section 300, 1500, 1600 And 1700. , Providing & Fixing Guard Railing With Tubular Steel Sections At Foot Path / Medians / Islands Etc Including Foundation Concrete And Painting With Approved Paint Etc. All Complete As Per Drawing & Mort&H Specifications Clauses 808, 300, 1500, 1700 & 1900. , Toll Booth At Tollplaza , Barrier Gates At Tollplaza For 3.2 M Wide Toll Lane , Barrier Gates At Tollplaza For 4.5 M Wide Toll Lane , Canopy , Canopy Lights Halide Lamps 150 Watt , Canopy Lights Halogen Lamps 1000 Watt , Loading Unloading Platform , Traffic Aid Post At Toll Plaza , Medical Aid Post At Toll Plaza , Vehicle Rescue Post At Toll Plaza , Ambulances At Toll Plaza , Cranesat Toll Plaza , Electronic Toll Connection (Etc Lanes) At Toll Plaza , Intercom Facility At Toll Plaza , Weigh Bridge , Car Parking Area , Generator Room , Base Maintainance Camp , Toll Plaza Equipment , Electrification And Air Conditioning For Toll Booth And Toll Plaza , Bull Nose Crash Barrier , Standby Generator At Toll Plaza , Cctv Camera Installed At Each Booth , T1 For Toll Road Start , T2 For Toll Gate 1 Km , T3 For Toll Gate 500 M And Toll Rates , T4 For Exempt Vehicles At Toll Plaza , T5 For Pictorial Description Of Toll Rates , T6 For Over Size Vehicle Lane Direction Sign At Toll Plaza , T7 Near The Toll Booths Displaying Toll Rates, Exempt Vehicles And Complaint Telephone Number & Address , T8 For Toll Road End , Picnic Area At Rest Area , Petrol Pump & Pepairing Shop At Rest Area , Buffer Zone At Rest Area , Traffic Blinker Signal (L.E.D.) , Pvc Roof Sheet At Fob , Cost Of Water Quality Monitoring , Cost Of Soil Quality Monitoring , Cost Of Ambient Air Quality , Cost Of Ambient Noise Monitoring 24 Hour Continuous , Consent To Establish (Cte) , Consent To Operate (Cto) , Compliance Submission For Consent To Establish (Cte) , Compliance Submission For Consent To Operate (Cto) , Cost Of Environmental Workshop , (I)Bitumen (Vg-30 Grade) Ex- Haldia Bulk , (Ii)Bitumen (Vg-40 Grade) Ex- Haldia Bulk , Bitumen Emulsion (M.S.) Ex- Bokaro Packed , Bitumen Cationic Emulsion (M.S.) Packed, Ex-Bokaro , 2 Component Cold Applied Plastic With Specialised Cold Plastic Primer Coating Rolled On Surfacing Material Solvent Free, High Build Two Pack Seamless, Tough, Skid Resistant, For Material To Reduce Speed With Specialised High Refractive Index Glass Beads Of Minimum Reflectivity Index Of 1.5. The Glass Bead Shall Be @ 250Gm/Sqm. Type 1 Beads (Refer Morth Specification Clause803.4.2) Which Are A Constituent Of The Basic Cold Plastics Compound Vide Table 800-9 (Morth Specification) And Type 2 Beads Are Those Which Are To Be Sprayed On The Surface Vide Clause 803.6.4 (Morth Specification)Dry/Wet Visibility And Skid Resistance Shall Be Conforming To Clause 15.5 Of Irc 35. , 5Mm Thick Anti-Glare Screen Of Ppcp/Hdpe Material. The Anti Glare Shall Be Rectangular Vane Of 220-230 Mm Wide And 600Mm Ht. The Screen Shall Have Minimum One Yellow Reflective Sheeting Band On Both Sides Of Sheet. The Reflective Band Shall Be 150Mm Ht And Conforming To Type Xi Sheeting Specifications As Per Irc 67 , 5Mm Thick Antl-Glare Screen Of Ppcp/Hdpe Material. The Anti Glare Shall Be Rectangular Vane Of 220-230 Mm Wide And 900Mm Ht. The Screen Shall Have Minimum One Yellow Reflective Sheeting Band On Both Sides Of Sheet. The Reflective Band Shall Be 150Mm Ht And Conforming To Type Xi Sheeting Specifications As Per Irc 67 , 10 Mm Thick Anti-Glare Screen Of Ppcp/Hdpe No. Material. The Anti-Glare Shall Be Rectangular Vane Of 300 Mm Wide And 650 Mm Ht. The Screen Shall Have Minimum One Yellow Reflective Sheeting Band On Both Sides Of Sheet. The Reflective Band Shall Be 150Mm Ht And Conforming To Type Xi Sheeting Specifications As Per Irc 67 , Tubular Markers 700 Mm Ht (Mini.) And Having Minimum Dia. Of 75Mm. Tubular Marker Shall Be Made Up Of Polyurethane And Flexible In Nature Conforming To Irc Sp 55 With The Minimum 50Mm Width Of 2 No. Reflective Bands To The Approaching Road Users. The Reflective Bands Shall Be Provided With White Colour Retro Reflective Sheeting Type Xi As Per Irc: 67 , Red /Yellow Unbreakable Polycarbonate Body Solar Blinker 300Mm Dia. Led Lamp Conforming To Irc:93 And Is:7537. It Shall Have Light Emitting Diode (Led) Hi Bright Technology (Compliant To En12368 Or Equivalent Bis Standard). The Signal Switching Shall Be Solid State, With Opto-Isolation. The Automatic Operation Mode Shall Have Functional Flashing Rate Avallable At 50% Duty Cycle 50 Or 60 Flashes/Minutes. The Electrical Power Supply Shall Be Solar Based 12 Vdc Operating At Ambient Temperature 0 To 55°C. The Solar Power System Shall Have In-Built Charge Controller - Low/High Cut Out, Solar Spy Module 60 Watts. Maintenance Free Battery (60Ah) (Having Back Up For Operating Blinker For 72 Hrs In Absence Of Sun Or During Rainy Or Foggy Days. The Solar System Shall Be Housed In A Weatherproof Pole Mounting Cabinet With Clamp And Mounting Accessorles. , Cement - Opc 53 Grade Confirming To Is 269 : 2015 , Tar Felt Cusion , Solar Powered Road Marker (Solar Stud): Supplying And Installation Of Solar Raised Pavement Markers Made Of Polycarbonate Moulded Body With Circular Shape, Solar Powered, Led Self-Illumination In Active Mode, 360 Degree Illumination And Reflective Panels With Micro Prismatic Lens Capable Of Providing Total Internal Reflection Of The Light Entering The Lens Face In Passive Mode. The Marker Shall Support A Load Of 20000 Kg Tested In Accordance To Astm D 4280. Its Water Resistance Shall Meet The Requirements Of Ip 65 In Accordance With Is:12063:1987 Category 2 For Protection Against Water Ingress. Colour Of Lighting Could Be Provided In Red Or Yellow (Amber) Or Green Or Blue Or Combination As Per Requirement. It Shall Have Super Bright Leds So As To Provide Long Visibility From A Distance Of More Than 800 M. Its Flashing Rate Shall Not Be Less Than 1 Hz. It Should Be Able To Give The Prescribed Performance In The Temperature Range Of -40°C To +55°C. Its Life Shall Be Not Less Than 3 Years. The Full Charge Should Provide For A Minimum Autonomy Of 50 Hours Operation. The Height, Width And Length Of The Marker Shall Not Be Less Than 10Mm X 100Mm X 100Mm. Also The Surface Diameter Of The Marker Shall Not Be Less Than 100Mm Respectively. The Weight Of Marker Shall Not Exceed 0.5 Kilograms. Fixing Will Be By Drilling Holes On The Road For The Shanks To Go Inside, Without Nails And Using Epoxy Resin Based Adhesive. , Mechanically Woven, Metallic Coated (Galvanized With Zinc Alloy In Accordance With Is 4826) Steel Wire Conforming To Is 280, Double Twisted, Hexagonal Shaped Wire Mesh Of Mesh Type 6X8 (D=60 Mm With Tolerance Of ± 2%) Zinc + 10% Aluminum And Coated With High Abrasion Resistant Polymer Coating Conforming To Is 16014:2024, Mesh Wire Dia 2.2/3.2 Mm (Id/Od) , Mechanically Woven, Metallic Coated (Galvanized With Zinc Alloy In Accordance With Is 4826) Steel Wire Conforming To Is 280, Double Twisted, Hexagonal Shaped Wire Mesh Of Mesh Type 8X10 (D=80 Mm With Tolerance Of ± 2%) Zinc + 10% Aluminum And Coated With High Abrasion Resistant Polymer Coating Conforming To Is 16014:2024, Mesh Wire Dia 2.7/3.7 Mm (Id/Od) , Manufactured Sand Derived From Recycled Concrete Aggregate (Rca) , Recycled Concrete Aggregate (Rca) 20 Mm Nominal Size , Recycled Concrete Aggregate (Rca) 12.5 Mm Nominal Size , Recycled Concrete Aggregate (Rca) 10 Mm Nominal Size , Recycled Aggregate (Ra) 40 Mm Nominal Size , Recycled Aggregate (Ra) 20 Mm Nominal Size , Recycled Aggregate (Ra) 10 Mm Nominal Size
Basic Detail
Tender No RCD/HAZARIBAG/745
Bidding Type Tender
Location
City Hazaribagh
State Jharkhand
Key Dates
Publish Date 04 Jul 2026
Submission Date 10 Jul 2026
Open Date 13 Jul 2026
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
09ad799e-1c94-4384-9872-7a2e88b41723.html
BOQ_156614.xls
Tendernotice_1 (11).pdf
Tender_paper.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 10, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Jul 13, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 8 days

Tender Documents

Download All (ZIP) ↓
html

09ad799e-1c94-4384-9872-7a2e88b41723.html

xls

BOQ_156614.xls

pdf

Tendernotice_1 (11).pdf

pdf

Tender_paper.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders