Tender For Providing Gas Line In Newly Built Chemistry Lab On Top Of Csif Central Block
Tender Value
3.44 Lakhs
Estimated cost
Bid Submission
13 Jul 2026
8 days left
EMD
8614
Bank guarantee accepted
Document Fee
897
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Gas Line In Newly Built Chemistry Lab On Top Of Csif Central Block
BOQ
| Sl. No. | Item Description |
| 1 | OD252475/2025-2026:Providing and fixing 3/8 copper tube 18 gauge (Use high-quality red copper, durable, resist temperature fluctuations and providing protection against corrosion and environmental factors) complete with copper fittings (cost of fittings to be paid separately)including leak test with nitrogen as per the direction of Officers in Charge. |
| 2 | OD252474/2025-2026:Supplying and fixing 3/8 copper T connector (18 gauge) |
| 3 | OD252473/2025-2026:Supplying and fixing 3/8 copper elbow connector (18 gauge) |
| 4 | OD252533/2025-2026:supplying and fixing Lab Bunsen Burner (Optimum Working Pressure : 0/035 kg/cm2 ? 0/5 psig., Gas Consumption Per Hour: 0/06 kg ? 0/13 Lbs. Rated Heat Output: 1250 Kcal/hr.,4950 btu/hr) |
| 5 | OD252478/2025-2026:Supplying and fixing 3/8 brass T connector |
| 6 | OD252477/2025-2026:Supplying and fixing 8 mm Three Layer Hose (maximum working pressure (WP) - 1.0 MPa) |
| 7 | OD252471/2025-2026:Supplying and fixing butterfly handle valve |
| 8 | OD252472/2025-2026:Supplying and fixing 8 mm hose nose (brass) |
| 9 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 10 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 11 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) |
| 12 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender