Tender For Remaining Repair Of Residential Quarters At 2Nd Bn. Rac Kota
Tender Value
62 Lakhs
Estimated cost
Bid Submission
14 Jul 2026
2 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kota → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Remaining Repair Of Residential Quarters At 2Nd Bn. Rac Kota
BOQ
| Sl. No. | Item Description |
| 1 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 2 | Taking out decayed bricks from wall and replacing with new ones set in : Cement Sand Mortar 1:6. |
| 3 | Repair to cement plaster in cement mortar 1:6 (1-Cement:6- fine sand) including removal of old plaster in regular shape and white or colour washing. |
| 4 | Making opening in masonary wall including dismantling, fixing lintel/beam and making good the damages to wall and floor complete to match the existing surface including propping the existing structure above the opening excluding cost of lintel/beam etc. |
| 5 | Repair of existing steel glazed doors , windows and ventilators,MS sheet door, garage |
| 6 | Renewing glass panes, with puty and nails wherever necessary:4 mm thick plain glass panes. |
| 7 | Refixing old glass panes with putty and nails. . |
| 8 | Guniting damaged R.C.C. slab, beams and columns for strengthebning with cement sand mortar 1:2 (1-Cement:2-sand) including preparing the surface, making 'V' shaped joints, cleaning the reinforcement bars with jet of potable water and drying with compressed air, including cost of centering and shuttering and finishing to match the existing surface etc. complete, including provided M.S. welded mesh to gauge 25 mm x 25 mm framing with average thickness of 25 mm. |
| 9 | Chopping loose and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand blasting, clening with a jet of water / air as necessary and getting it dried with compressed air including allscaffolding:Depth upto 25 mm. |
| 10 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to thedumping ground within 50mtr lead |
| 11 | LABOUR charges for repair to door / window without using any MATERIAL such as applying randha (finishing) tighteningof bolts & screw etc. |
| 12 | Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods andhire charge of welding meachine and TP etc complete |
| 13 | Repair of existing doors , windows shutters |
| 14 | including cost of material and labour for |
| 15 | (a) Style / rail of teak wood 30 mm thick / |
| 16 | Aluminium section |
| 17 | ( i ) 4\\" wide ,. |
| 18 | ( ii ) 6\\" wide,. |
| 19 | Panel by |
| 20 | ( i ) shuttering ply - 9 mm thick ( Commercial ) |
| 21 | ( ii ) wire gauge 14 meshx 24 gauge . |
| 22 | Aldrop of mild steel |
| 23 | ( I ) 12\\" long x 12 mm dia |
| 24 | ( ii ) 8\\" long x 10 mm dia |
| 25 | Door spring of mild steel |
| 26 | Mild steel tower Bolt 6\\" long |
| 27 | Steel locking Bolt |
| 28 | Steel Handle 6\\" size |
| 29 | Add extra for mirror polishing on marble work/stone workwhere ever required to give high gloss finish complete. |
| 30 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : i) Ist course of applying cement slurry @ 4.4 Kg/sum mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:3 (1 cement: 3 coarse sand) mixed with water. proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg per sqm. of area. iv) IVth course of 400 micron thick PVC sheet .(Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) |
| 31 | 30mm thick factory made solid both side Pre laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for stiles and 15x15mm top & bottom rails. M.S .frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm thick heat moulded PVC ‘C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on either side forming stiles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75 mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet shall be provided as gap insert for top rail & bottom rail. Panelling of 5mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles &r |
| 32 | Patch repair to cement concrete floor including digging out oldfloor in regular shape and removal of rubbish curing etc. complete in all respects. |
| 33 | Flyash Flyash Brick work with flyash Flyash Bricks of class designation 75 in superstructure above plinth level upto floor Three Level in all shapes and sizes in : Cement mortar 1 : 6 (1cement : 6 coarse sand) |
| 34 | Supplying and fixing rough dressed stone sills, dasa, coping, cornices sriwan, string courses etc. in cement mortar 1 : 4 including pointing with admixture of pigment matching withthe stone shade : 50 mm thick |
| 35 | Providing, hoisting and fixing up to floor Three level precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia Mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1 : 3 (1 cement : 3 fine sand ) etc complete as per approved design excluding plastering of jambs, sills and soffits:- 40 mm thick |
| 36 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). |
| 37 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cuttingwelding and fabrication with priming coat of red oxide |
| 38 | Filling of sunk portion of roof with earthen pots of required height including filling voids with 1 : 2 : 4 light concrete, using brick bats complete leveling and dressing the surface by 50 mmthick cement concrete 1 : 2 : 4 as per specification. |
| 39 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : |
| 40 | Plaster on new surface on walls in cement sandmortar 1:4 including raking of joints etc. complete fine finish: 20 mm thick. |
| 41 | Distempering with oil bound washable distemper of approved brand and manufactureto give an even shade including all scaffolding:- Old work (one or more coats) including scrapping surface and necessary repairs.Colour change |
| 42 | New work (two or more coats) over and |
| 43 | Painting with enamel paint of approved brand :-One or morecoats on old work |
| 44 | Finishing wall with vinyl satin finish coating paints of approved shade with two or more coats including sand-papering, priming coat, making surface with putty or plaster of Paris etc. completein all respects : |
| 45 | P & F WVC wash basin (1st quality, I.S. : 2556 Mark) of approved make with C.I. brackets duly painted,1 No. 15 mm C.P. Pillar cock (IS : 8934 Mark) & 32 mm C.P. brass waste coupling of approved make,25 mm G.I. waste pipe complete including cutting & makinggood the wall.: Size 510 mm x 400 mm |
| 46 | P& F waste Pipe with all fitting :- P.V.C. with C.P. nut 40 mmdia |
| 47 | P&F looking mirrors with PVC frame of approved (atul/equivalent) :-Size 500x400mm |
| 48 | P&F extension pipe for bib cocks of approved quality/ make:C.P. brass of Heavy & superior quality50x15mm |
| 49 | P & F Bib Cock (IS:8931 Mark) Superiorquality of approved make :- C.P. Brass bib cock, 15 mm nominal bore. |
| 50 | P & F Ball Cock (IS:1703 Mark) with Rod &P.V.C. Ball complete : Brass wt. 400 gm, 15 mm |
| 51 | Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25 mm nominal bore. |
| 52 | 2.15 P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15 mm nominal bore. |
| 53 | Gun-metal 25 mm nominal bore. |
| 54 | Supply & fixing G.I. Union ISI marked in G.I. pipe line as required complete in all respect of size :15mm dia nominal bore |
| 55 | 25mm dia nominal bore |
| 56 | P & F S.C.I. Fittings (IS:129 mark) in CM 1:4 with :-Double Door :-Y/Tee |
| 57 | a) 75mm dia With out Door in each |
| 58 | b) 100mm dia With out Door in each |
| 59 | P & F Sand-cast Floor trap (Nahni) of (IS:1729 Mark) of approved quality / make with socket down or hingedgrating including cutting and making good the floor. Size100x75 mm |
| 60 | b) P & F Sand-cast Iron 'P' or 'S' Trap (IS:1729 make) ofapproved make. |
| 61 | Add extra for Lead caulked joints (IS:782-1978) in sand cast iron pipes/spun.75mm dia 0.88Kg pig lead |
| 62 | b) 100mm dia 0.98Kg pig lead |
| 63 | P & F Sand-cast Iron (S.C.I.) pipe (IS:1729 Mark) of approved make in wall or in floor with M.S. holder bat clamps in 10x10x10 Cm. M-15 grade concrete blocks, joints filled with CM 1:4 with spun yarn including cuttingholes and making good the wal :- 75 mm dia |
| 64 | b) 100 mm dia |
| 65 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:Size 300 Cm. dia outside & 300 Cm.depth |
| 66 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/make |
| 67 | a) Coupler |
| 68 | 75 mm |
| 69 | 100 mm |
| 70 | b) Door Bend 87.5Dg |
| 71 | 75 mm |
| 72 | 100 mm |
| 73 | c) Single `Y' with Door |
| 74 | 75 mm |
| 75 | 100 mm |
| 76 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) :- 20mm nominal outer diapipes |
| 77 | Providing and fixing 15 to 20 mm thick Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12 mm (Av.) thick base of cement mortar 1 : 3 (1 cement : 3 coarse sand) jointing with white cement mortar 1 : 2 (1 white cement : 2 marble dust) with pigment to match the shade of the granite slab completeincluding rubbing and polishing of : |
| 78 | Green/Black/Other granite :-Size above 3600 Cm2 |
| 79 | Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work / KotaStone:- Full Edge moulding |
| 80 | Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc.complete in all respect. Washing with acid. |
| 81 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete ofapproved design: |
| 82 | b) - do - 500 litres capacity. |
| 83 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. |
| 84 | 2 x 1.5 sq.mm |
| 85 | 2 x 2.5 sq.mm+1x1.5 sqmm |
| 86 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. |
| 87 | Supplying and fixing of power plug point accessories on 18 SWG metal box of size 175 x 100 x 60 mm. on surface or in recessed with suitable size phenolic laminated sheet cover including cost of 6 pin 16 amp. Switch and socket outlet , making connection , testing , etc. as required. |
| 88 | P & F 18 SWG Sheet steel boxes duly finished with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surface or in recessed as required. |
| 89 | 175mm x 100mm x 60mm |
| 90 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. |
| 91 | Single pole MCB |
| 92 | 6 A to 32 A rating |
| 93 | Double pole MCB |
| 94 | 40 A 63 A rating |
| 95 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper wires with lugs, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS 13032 & IS 8623 including making internal DB terminations with copper lugs , testing etc. as required. |
| 96 | Double door (single phase) |
| 97 | 8 Way |
| 98 | P & F ISI marked (IS :3854) 16 amp. flush type switch including cutting hole in tile and making connection testing etc. as required. |
| 99 | P & F ISI marked (IS :3854) bell push surface type including making connection testing etc. as required. |
| 100 | P & F ISI marked gong bell including making connection testing etc. as required. |
| 101 | P & F of 3 pin 6 amp. flush type socket including cutting hole in tile and making connection testing etc. as required. |
| 102 | P & F 3/6 pin 16 amp flush type socket including cutting hole in tile and making connection testing etc. as required. |
| 103 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. |
| 104 | P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. |
| 105 | P & F socket size flush type 120/280 watt rotary 5 step fan regulator including making connection testing etc. as required. |
| 106 | P & F box type fluorescent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). |
| 107 | 1 X 36 Watts with EB |
| 108 | P & F Fluorscent tube rod in existing fixtures as required, |
| 109 | Flourscent powder coated (minimum 3 star rating) |
| 110 | 36/40 Watts |
| 111 | P & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. |
| 112 | 1200 mm sweep |
| 113 | P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. |
| 114 | 225 mm sweep |
| 115 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. |
| 116 | 10.0 Sq.mm |
| 117 | 2 core |
| 118 | Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes. |
| 119 | With Pipe in Pipe Technology (Inner pipe dia. / Outer pipe dia. ) 80 - 100 micron GI Coating |
| 120 | GI pipe 2000 mm long, 50 / 25mm, Terminal 12 mm GI Strip |
| 121 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. |
| 122 | 10 SWG copper. Wire |
| 123 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. |
| 124 | Short point (up to 3 mtr.) |
| 125 | Medium point (up to 6 mtr.) |
| 126 | Long point (up to 10 mtr..) |
| 127 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. |
| 128 | 25 mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysJul 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender