Tender For Repair/Replacement Of Chain Link Fencing And Certain B/R Works At Domestic Area At Afs Amla
Tender Value
25 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
21 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Chain Link Fencing And Certain B/R Works At Domestic Area At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, any type including taking out embedded in concrete, brick work, masonry etc portion and making good disturbed ground complete all as specified and directed. |
| 2 | Excavation in soft/loose soil for post holes (or similar holes) each n. exc 0.5 cum getting out, returning filling in and ramming earth or brocken rubble mixed with earth around, in layers not exceeding 25 cm for soft / loose soil and removing surplus soil to a distance n.exc 50mtr and making good surface in soft/loose soil complete all as specified and directed. |
| 3 | M&L for plain Cement Concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in foundation filling or in mass concrete complete all as specified and directed. |
| 4 | S&F precast reinforced cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed. |
| 5 | Dismantling fencing wire mesh of any size/type complete all as specified and directed. |
| 6 | Supply only chain link MS galvanised fencing of size 4\\" x 4\\" and dia of wire 4mm or any size or type complete all as specified and directed. |
| 7 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, tightening complete all as specified and directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 9 | S&F framed work as in doors or gates of angle or other section with gusset plates,rails braces etc complete drilled for fixing of steel sheeting or other covering.Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coverings,running rails and guides) and hanging; also fastening and fixing complete, Fe-410-W (Gde-250) quality A complete all as specified and as directed . |
| 10 | S&F in repairs Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 11 | S&F in repairs Mild steel screw bolts (machine made) 11mm to 15mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends and screwed other end or screed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but exc 10 cm but n.exc 15 cm long complete all as specified and directed. |
| 12 | M&L for Mild steel round bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde. E-250) quality A or Fe 290 (Gde-E-165) complete all as specified and directed. |
| 13 | S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed including taking down (each line wire to be measured) complete all as specified and directed. |
| 14 | M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed. |
| 15 | M & L for preparation of old painted steel, steel fencing etc of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 16 | Demolition of brick work built in ement mortar (manhole soak well & septic tank etc.) including coping complete all as specified and as directed. |
| 17 | M&L Fly ash brick 75 kg/cmsq compressive strength. Modular size , is straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 18 | M&L for Plain cement concrete B-0 type (1:2:4) using 12.5 mm graded crushed stone aggregate as in copings, bed plates, benching and the like finished fair & even, including necessary form work complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement with and including sagol finish complete all as specified and directed. |
| 20 | M&L for preparing newly plastered surfaces of walls and applying two coat of cement base paint over a coat of alkali-resistant primer complete all as specified and directed. |
| 21 | M & L for complete removal existing treatment of old external decorative surface of walls and applying two coats of cement base paint over a coat of cement primer, including filling cracks with exterior wall care putty wherever necessary complete all as specified & directed. |
| 22 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions and similar works (rough finish) complete all as specified and directed. |
| 23 | Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc complete all as specified and directed. |
| 24 | M&L for Granite (Z Black) 18 to 20 mm thick table rubbed & polished in steps , jambs, cills, shelves etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed . |
| 25 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
TodayJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender