Tender For Certain Repair/ Maint/ Renewal To Internal Electrification System, Ceiling Fans/ Exhaust Fans/ Ventilation Fans, Bldg Earthing, Storage Water Heater, Desert Coolers And Other Allied Works Of Otm And Md Accn Of Bhadoriya Complex Under Ge So
Tender Value
28 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
19 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repair/ Maint/ Renewal To Internal Electrification System, Ceiling Fans/ Exhaust Fans/ Ventilation Fans, Bldg Earthing, Storage Water Heater, Desert Coolers And Other Allied Works Of Otm And Md Accn Of Bhadoriya Complex Under Ge South Pathankot
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and taking out burnt winding by cutting, cleaning slots and re-winding of AC ceiling fan motor 1200mm of any make of fan with super enameled copper winding wire of existing gauge including, sleeve work, varnishing with E class insulation varnish, complete all as specified and directed including taking down & refixing the same. Note :- (i) Motor shall be wound with machine only.(ii) super enameled copper winding wire shall only be used. |
| 2 | Replacement of old unserviceable gun metal bush of ceiling fan complete all as specified and directed. |
| 3 | Replacement of old unserviceable capacitor 2.5 mfd ISI marked complete all as specified and directed |
| 4 | All as per Serial item No. 3 here-in-above but 3.15mfd complete all as specified and directed. |
| 5 | Replacement of old unserviceable ball bearing suitable for 1200 mm sweep ceiling fan complete all as specified and directed. |
| 6 | Replacement of old unserviceable shackle assy kit (rubber real -01, MS split clamp two Nos, nuts and bolts washers 2 Nos & split pin -02 Nos) suitable for ceiling fan 1200/1400mm sweep complete all as specified and directed. |
| 7 | Replacement of old unserviceable fan blades, ISI Marked, suitable for 1200/1400mm sweep ceiling fan of any make complete all as specified and directed. |
| 8 | Replacement of old unserviceable MS down rod of appropriate External dia of ceiling fan complete (length of rod not less than 45cm and not more than 60cm and 15 mm dia) complete all as specified and directed. |
| 9 | S&F Canopy for ceiling fan as per existing sample complete all as specified and as directed. |
| 10 | S&F PVC Two way connector for ceiling fan complete all as specified and directed. |
| 11 | Replacement of old unserviceable steel screw (to be used for fixing of fan blade) as per sample/site requirement of fan complete all as specified and directed. |
| 12 | Servicing of ceiling fans of capacity 1200 mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed by Engr-in-Charge. (Unserviceable parts if any will be measured and paid separately). |
| 13 | Dismantling and taking out burnt BLDC ceiling fan Driver card with Replacement to new BLDC ceiling fan Driver card of AC ceiling fan1200mm of any make of fan complete all as specified and directed. |
| 14 | Supply only 1200 mm BLDC ceiling fan remote suitable for as per existing fan complete all as specified and as directed. |
| 15 | S&F cable PVC insulated and overall sheathed with flexible copper conductor Single core of size 1.0 sqmm complete all as specified and directed. |
| 16 | Dismantling and Re-winding of exhaust fan/industrial fan motor 250-300 mm sweep any make of fan with super enameled copper winding wire of suitable gauge as per existing including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections fan complete all as specified and directed. Note :- (i) Motor shall be wound with machine only.(ii) Super enameled copper winding wire shall only be used. |
| 17 | All as per Serial item No.16 here-in-above but 350mm-450mm sweep complete all as specified and directed. Please Enable Macros to View BoQ information |
| 18 | All as per Serial item No.16 here-in-above but 350mm-450mm sweep complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender