Tender For Architectural, Interior Design, Repair And Renovation Work Of Existing Mm , Project. Css And Finance Division With Officer Chamber At Omfed Corporate Office, Sahidnagar, Bbsr, Khurda
Tender Value
80.44 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
21 days left
EMD
80450
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Architectural, Interior Design, Repair And Renovation Work Of Existing Mm , Project. Css And Finance Division With Officer Chamber At Omfed Corporate Office, Sahidnagar, Bbsr, Khurda
BOQ
| Sl. No. | Item Description |
| 1 | Architectural work |
| 2 | MM Division:- Providing, fitting fixing double skinned partition with Alm Sec-9210 as Horizontal & vertical member placed at suitable 600mm C/C and covered with 9mm thick BWR ply and 4 mm thick veneer of (Soneer Sycamore) with melamine polish after cleaning the surface etc complete with all material & all labour T&P etc as per specification approved by the Department & as per direction of EIC. |
| 3 | Supplying, fitting, fixing of Cup boared with Openable shutter made of 18mm Pre-laminated particle board in bottom, top & side wall & back side with 9mm Pre-laminated particle board both side decorative including magnetic locking arrangement, Cromium coated handel 75mm with 125 x 25mm / 100mm with 150 x 25mm plate & 6nos/ 4nos drawers provide with 20\\" telescopic channel including cost, conveyance, taxes of all fittings & materials, cost of all labour, T&P etc. complete as per direction of Engineer-incharge. |
| 4 | Providing and fixing of 12 mm thick clear Toughened Glass Frameless door with Dorma Premium fittings. Dorma Premium (9111198) untite package BTS75 ULPT 10 with cover, ULUS 10 Luck with cover and PT-24, Dorma Premium (9137121) H type Handle 450 mm, 12 mm clear Toughened glass, with cutout and hole including cost of all materials labour etc. complet. |
| 5 | Supplying fitting and fixing of factory made single leaf rigid FRP composite door shutter of 32mm thick laminated with to GRP skins with good grain finished fabricated using UV stabilized isopthalic gal coat and one layer of 450 gsm E-glass chopped strand mat with cost conveyance, labour T&P etc complete required for the work |
| 6 | Supplying, fitting and fixing of two track UPVC openable window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 7 | Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 8 | Providing fitting, fixing of Venetian blinds to the window as per approved design including cost, conveyance, taxes etc. complete |
| 9 | .Providing fitting, fixing of Venetian blinds (Roller type) to the window as per approved design including cost, conveyance, taxes etc. complete. |
| 10 | Post Construction Anti-Termite Treatment (Bifenthrin 2.5%EC) consists of drilling holes and filling it with a recommended pesticide emulsion sealing the hole after treatment including cost of all materials labour etc. complete. |
| 11 | Labour for dismantling & removing of old Door, partition, ceiling & window choukath including cost of labour T&P required for the work etc complete. |
| 12 | Scraping old paint with scrapers, sand papering and washing with Soap Water or soda including scaffolding charges upto 5M height. |
| 13 | Painting two coats to walls with distemper of any approved shade on new work to give an even shade over a coat of primer with water bond cement primer including including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 14 | Dismantling the existing tile flooring and stacking the useful materials for reuse and removing the debris away from the owrk site with all leads including cost of all labour, sundries and T&P scaffolding taxes and duties etc. required for the work complete , as per directed by the Engineer-in-charge. |
| 15 | Dismantling the plaster removing and stacking the debris as directed within site upto a lead of 100m, including cutting the reinforcement if any, etc. including labour, T&P scaffolding taxes and duties etc. complete as per direction of Engineer-in-charge. |
| 16 | Providing, supplying and applying 12mm thick cement plaster in line and level, at all heights above and below plinth level with cement motar 1:4 (1 cement: 4 sand) to walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves, etc. including scaffolding, curing, finishing smooth (the plaster surface shall be troweled till the surface shows cement paste), and chipping the concrete at all levels including cost of all materials, transportation, lift, loading, unloading, curing, labour, tools and plants, taxes, duties, levies, octroi, royalties etc. complete as per direction of Engineer – In-Charge |
| 17 | Supply fitting fixing and furnished of Granite Tiles of 16mm thickness of all materials carriage including all cost of all materials, labour T & P required for the work etc complete. |
| 18 | Providing, fitting and fixing of Ceramic Floor Tile of size (30cm x 30cm / 40cm x 40cm ) to all floors at required places over an under layer of 25mm thick cement mortar of prop. (1:1) including laying & jointed with white cement slurry mixed with colouring pigments to match the shade including watering, curing, cost, conveyances, , royalties of all materials and cost of all labour with T&P, sundries etc. complete and as per specification & direction of Engineer-in-charge. |
| 19 | Removing and shifting all the existing office furnitures, almiraha to the separate room before start the work and reset the same after complete the work and dismentaling material shift from the 1st floor to the Ground floor of the office building . |
| 20 | Providing, fitting, fixing up False ceiling of approved design and drawing in all floors with G.I Section on 4 walls to be fixed by means of steel screw and PVC plug and the G.l. grid 2’-0”x2’-0” to be suspended from ceiling by using 12.5mm thick Fire Line Gypsum Board including cost of all materials, all labour, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. |
| 21 | Providing Fitting and fixing of wooden ceiling Made out of 32 mm thick planks (as per approved design) placing the long planks both side of corridor and short planks in between long planks maintaining equal spacing with provision for lighting including cost of all material, labour T&P Required for the work etc complete as per EIC. (The rate is taken as per sl no. 19 ceiling rate. ) |
| 22 | Providing Fitting and fixing of PVC loovers 8 mm thick plank of size 10\\"x10' long including cost of all material , labour and T&P required for the work complete as per EIC. |
| 23 | CSS Division.- Providing, fitting fixing double skinned partition with Alm Sec-9210 as Horizontal & vertical member placed at suitable 600mm C/C and covered with 9mm thick BWR ply and 4 mm thick veneer of (Soneer Sycamore) with melamine polish after cleaning the surface etc complete with all material & all labour T&P etc as per specification approved by the Department & as per direction of EIC. |
| 24 | Supplying, fitting, fixing of Cup boared with Openable shutter made of 18mm Pre-laminated particle board in bottom, top & side wall & back side with 9mm Pre-laminated particle board both side decorative including magnetic locking arrangement, Cromium coated handel 75mm with 125 x 25mm / 100mm with 150 x 25mm plate & 6nos/ 4nos drawers provide with 20\\" telescopic channel including cost, conveyance, taxes of all fittings & materials, cost of all labour, T&P etc. complete as per direction of Engineer-incharge. |
| 25 | Supplying fitting and fixing of factory made single leaf rigid FRP composite door shutter of 32mm thick laminated with to GRP skins with good grain finished fabricated using UV stabilized isopthalic gal coat and one layer of 450 gsm E-glass chopped strand mat with cost conveyance, labour T&P etc complete required for the work |
| 26 | Supplying, fitting and fixing of two track UPVC openable window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 27 | Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 28 | .Providing fitting, fixing of Venetian blinds (Roller type) to the window as per approved design including cost, conveyance, taxes etc. complete. |
| 29 | Post Construction Anti-Termite Treatment (Bifenthrin 2.5%EC) consists of drilling holes and filling it with a recommended pesticide emulsion sealing the hole after treatment including cost of all materials labour etc. complete. |
| 30 | Labour for dismantling & removing of old Door, partition, ceiling & window choukath including cost of labour T&P required for the work etc complete. |
| 31 | Scraping old paint with scrapers, sand papering and washing with Soap Water or soda including scaffolding charges upto 5M height. |
| 32 | Painting two coats to walls with distemper of any approved shade on new work to give an even shade over a coat of primer with water bond cement primer including including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 33 | Dismantling the existing tile flooring and stacking the useful materials for reuse and removing the debris away from the owrk site with all leads including cost of all labour, sundries and T&P scaffolding taxes and duties etc. required for the work complete , as per directed by the Engineer-in-charge. |
| 34 | Dismantling the plaster removing and stacking the debris as directed within site upto a lead of 100m, including cutting the reinforcement if any, etc. including labour, T&P scaffolding taxes and duties etc. complete as per direction of Engineer-in-charge. |
| 35 | Providing, supplying and applying 12mm thick cement plaster in line and level, at all heights above and below plinth level with cement motar 1:4 (1 cement: 4 sand) to walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves, etc. including scaffolding, curing, finishing smooth (the plaster surface shall be troweled till the surface shows cement paste), and chipping the concrete at all levels including cost of all materials, transportation, lift, loading, unloading, curing, labour, tools and plants, taxes, duties, levies, octroi, royalties etc. complete as per direction of Engineer – In-Charge |
| 36 | Supply fitting fixing and furnished of Granite Tiles of 16mm thickness of all materials carriage including all cost of all materials, labour T & P required for the work etc complete. |
| 37 | Rubbing old marble chips or marble tile flooring and dados skirting including was polishing to give granolithic finish. |
| 38 | Removing and shifting all the existing office furnitures, almiraha to the separate room before start the work and reset the same after complete the work and dismentaling material shift from the 2nd floor to the Ground floor of the office building . |
| 39 | Providing Fitting and fixing of PVC loovers 8 mm thick plank of size 10\\"x10' long including cost of all material , labour and T&P required for the work complete as per EIC. |
| 40 | Project Division:- Supplying, fitting, fixing of Cup boared with Openable shutter made of 18mm Pre-laminated particle board in bottom, top & side wall & back side with 9mm Pre-laminated particle board both side decorative including magnetic locking arrangement, Cromium coated handel 75mm with 125 x 25mm / 100mm with 150 x 25mm plate & 6nos/ 4nos drawers provide with 20\\" telescopic channel including cost, conveyance, taxes of all fittings & materials, cost of all labour, T&P etc. complete as per direction of Engineer-incharge. |
| 41 | Supplying, fitting and fixing of two track UPVC openable window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 42 | Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 43 | Post Construction Anti-Termite Treatment (Bifenthrin 2.5%EC) consists of drilling holes and filling it with a recommended pesticide emulsion sealing the hole after treatment including cost of all materials labour etc. complete. |
| 44 | Labour for dismantling & removing of old Door, partition, ceiling & window choukath including cost of labour T&P required for the work etc complete. |
| 45 | Painting two coats to walls with distemper of any approved shade on new work to give an even shade over a coat of primer with water bond cement primer including including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 46 | Supply fitting fixing and furnished of Granite Tiles of 16mm thickness of all materials carriage including all cost of all materials, labour T & P required for the work etc complete. |
| 47 | Rubbing old marble chips or marble tile flooring and dados skirting including was polishing to give granolithic finish. |
| 48 | Removing and shifting all the existing office furnitures, almiraha to the separate room before start the work and reset the same after complete the work and dismentaling material shift from the 2nd floor to the Ground floor of the office building . |
| 49 | Providing Fitting and fixing of PVC loovers 8 mm thick plank of size 10\\"x10' long including cost of all material , labour and T&P required for the work complete as per EIC. |
| 50 | Providing, supplying and applying 12mm thick cement plaster in line and level, at all heights above and below plinth level with cement motar 1:4 (1 cement: 4 sand) to walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves, etc. including scaffolding, curing, finishing smooth (the plaster surface shall be troweled till the surface shows cement paste), and chipping the concrete at all levels including cost of all materials, transportation, lift, loading, unloading, curing, labour, tools and plants, taxes, duties, levies, octroi, royalties etc. complete as per direction of Engineer – In-Charge |
| 51 | .Providing fitting, fixing of Venetian blinds (Roller type) to the window as per approved design including cost, conveyance, taxes etc. complete. |
| 52 | Finance Division:- Supplying, fitting, fixing of Cup boared with Openable shutter made of 18mm Pre-laminated particle board in bottom, top & side wall & back side with 9mm Pre-laminated particle board both side decorative including magnetic locking arrangement, Cromium coated handel 75mm with 125 x 25mm / 100mm with 150 x 25mm plate & 6nos/ 4nos drawers provide with 20\\" telescopic channel including cost, conveyance, taxes of all fittings & materials, cost of all labour, T&P etc. complete as per direction of Engineer-incharge. |
| 53 | Supplying, fitting and fixing of two track UPVC openable window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 54 | Supplying, fitting and fixing of M.S. grill in windows including screws as may be required etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 55 | Post Construction Anti-Termite Treatment (Bifenthrin 2.5%EC) consists of drilling holes and filling it with a recommended pesticide emulsion sealing the hole after treatment including cost of all materials labour etc. complete. |
| 56 | Labour for dismantling & removing of old Door, partition, ceiling & window choukath including cost of labour T&P required for the work etc complete. |
| 57 | Painting two coats to walls with distemper of any approved shade on new work to give an even shade over a coat of primer with water bond cement primer including including cost, conveyance, taxes of all materials, cost of all labours, T & P, sundries etc. as required for the work complete. |
| 58 | Supply fitting fixing and furnished of Granite Tiles of 16mm thickness of all materials carriage including all cost of all materials, labour T & P required for the work etc complete. |
| 59 | Rubbing old marble chips or marble tile flooring and dados skirting including was polishing to give granolithic finish. |
| 60 | Removing and shifting all the existing office furnitures, almiraha to the separate room before start the work and reset the same after complete the work and dismentaling material shift from the 2nd floor to the Ground floor of the office building . |
| 61 | Providing Fitting and fixing of PVC loovers 8 mm thick plank of size 10\\"x10' long including cost of all material , labour and T&P required for the work complete as per EIC. |
| 62 | Providing, supplying and applying 12mm thick cement plaster in line and level, at all heights above and below plinth level with cement motar 1:4 (1 cement: 4 sand) to walls, beams, ceiling, stair, column, pardis, bends, moulds, pattas, grooves, etc. including scaffolding, curing, finishing smooth (the plaster surface shall be troweled till the surface shows cement paste), and chipping the concrete at all levels including cost of all materials, transportation, lift, loading, unloading, curing, labour, tools and plants, taxes, duties, levies, octroi, royalties etc. complete as per direction of Engineer – In-Charge |
| 63 | .Providing fitting, fixing of Venetian blinds (Roller type) to the window as per approved design including cost, conveyance, taxes etc. complete. |
| 64 | Providing and fixing of 12 mm thick clear Toughened Glass Frameless door with Dorma Premium fittings. Dorma Premium (9111198) untite package BTS75 ULPT 10 with cover, ULUS 10 Luck with cover and PT-24, Dorma Premium (9137121) H type Handle 450 mm, 12 mm clear Toughened glass, with cutout and hole including cost of all materials labour etc. complet. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender