Tender For Revival Of Existing Recharge Shafts To The Corporation High School At Kalar Atty In Division No: 57, Kondal Atty Ward Office Of Salem Corporation.
Tender Value
2 Lakhs
Estimated cost
Bid Submission
20 Jul 2026
14 days left
EMD
2000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Revival Of Existing Recharge Shafts To The Corporation High School At Kalar Atty In Division No: 57, Kondal Atty Ward Office Of Salem Corporation.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 2 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \\"U\\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] |
| 3 | 110mm Dia PVC Pipe [4 Kg/SqCm] |
| 4 | 110mm Dia PVC Elbow |
| 5 | 110mm Dia PVC Tee |
| 6 | Providing and laying filter media using HBG metal of 10mm size to a required thickness |
| 7 | Providing and laying filter media using HBG metal of 12.5mm size to a required thickness |
| 8 | Providing and laying filter media using HBG metal of 20mm size to a required thickness |
| 9 | Providing and laying filter media using HBG metal of 40mm size to a required thickness |
| 10 | Providing and laying filter media using HBG metal of 63mm size to a required thickness |
| 11 | Providing and laying filter media using Charcoal |
| 12 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 13 | Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying,Vibration and labour charges etc., complete as per standard specification |
| 14 | Providing an fixing MS board (at site) as per drawing including primer, painting, lettering with well finished surface and all lead & lifts as per direction of Engineer-in-Charge. |
| 15 | One-year Operation and Maintenance (O&M) following the Defect Liability Period (DLP-01 year) one-year, ensuring regular upkeep, monitoring, and maintenance, rectification of defects (damage, cracks, erosion in structures, any deposit etc.) of the constructed structures to sustain their performance and longevity and replace of defective sand and gravel. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender