Tender For Construction Of Service Road From Shyam Nagar To Meera Medpat 80Ft. Road (Chitrkoot Nagar) On Bhuwna Pratap Nagar 200Ft. Road. 2805
Tender Value
1.16 Crore
Estimated cost
Bid Submission
22 Jul 2026
16 days left
EMD
2.33 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Service Road From Shyam Nagar To Meera Medpat 80Ft. Road (Chitrkoot Nagar) On Bhuwna Pratap Nagar 200Ft. Road. 2805
BOQ
| Sl. No. | Item Description |
| 1 | Item Code [ Rd 2025 3.9.2 Excavation in Hard Rock ]:Item Type [road] :: Sub Item Code [ Rd 2025 3.9.2 Excavation in Hard Rock + 3.9.2-B]: Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections as per MoRTH Specification Clause 301.3. Mechanical Means |
| 2 | Item Code [2025 12.5 III m-20]:Item Type [road] :: Plain/reinforced cement concrete in substructure complete as per drawings and MoRTH specification Clauses 1700 and 2200 R.C.C grade M 20 |
| 3 | Item Code [2025 12.7]:Item Type [road] :: Supplying, fitting and placing TMT bar reinforcement (Fe 415) in sub structrue complete as per drawings and MoRTH specification Clauses 1009,1600 & 2202 |
| 4 | Item Code [2025 17.7]:Item Type [road] :: Providing and erectinga\\"W\\"metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail ,70cm above road/ ground level, fixed on CRC rolled channel vertical post,150x75x5mm spaced 2mm centre to centre, 1.8m high, 1.1m below ground /road level, all steel parts and fitments to be galvanized by hot dip process ,all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm, 330mm long complete as per MoRTH specification Clause 811.3. |
| 5 | Item Code [2025 3.14]:Item Type [road] :: Construction of sub grade and earth enshoulders with approved material obtained from borrow pits with all lifts and leads , transporting to site, spreading, grading to requireds lope and compacted to meet requirement of Table 300 - 2 with lead up to 50 m as per MoRTH Specification Clause 305.3 |
| 6 | Item Code [2025 3.5(iii) ]:Item Type [road] :: Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3 |
| 7 | Item Code [2025 3.8 (iii)]:Item Type [road] :: Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per MoRTH Specification Clause 301.3.5 |
| 8 | Item Code [2025 4.9 A i]:Item Type [road] :: Providing crushed run stone aggregate greading conforming to table400-14 depositing on aprepared surface by hauling vehicles ,spreading and mixing with a motor grader, watering and compacting with a three wheel 80-100 kN static roller as per MoRTH Specification Clause 407 to form a layer of sub-base/base By mix-in-place method With 53 mm maximum size of aggregates |
| 9 | Item Code [2025 5.1]:Item Type [road] ::Prime Coat Sub Item Code [2025 5.1 + (i)]: Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per MoRTH Specification Clause 502 |
| 10 | Item Code [2025 5.2 i]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 11 | Item Code [2025 UNIFIED BSR 3.4 (i)]:Item Type [road] :: Construction of embankment with approved materials obtained from borrow pits with a lift 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 50 m as per MoRTH Specification Clause 305.3 |
| 12 | Item Code [Building BSR 2025 11.1 (i) ]:Item Type [building] :: Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Upto 3 m depth nallha |
| 13 | Item Code [Building BSR 2025 11.4 (I)]:Item Type [building] :: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 nallha |
| 14 | Item Code [PWD BSR 2025 12.5 IV.]:Item Type [road] :: Plain/reinforced cement concrete in substructure complete as per drawings and MoRTH specification Clauses 1700 and 2200 R.C.C. grade M 25 nallha , wing wall raft , wall nallha slab |
| 15 | Item Code [road 2025 10.20]:Item Type [road] :: Marking Centre Line and stop lines etc. on road as per IRC pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160\\"C with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements. |
| 16 | Item Code [road 2025 16.14.2]:Item Type [road] :: Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tones per hour using crushed aggregates of specified grading , premixed with bituminous binder minimum @ 4.0 & 4.5 percent by weight of total mix and filler ,transporting the hot mix to work site ,laying with a hydrostatic paver finisher with sensor control to the required grade , level and alignment,rolling with smooth wheeled ,vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 505 complete in all respects. Bitumen (VG-30) Grading - II (26.50 mm (Nominal Size)) |
| 17 | Item Code [road 2025 16.15.5]:Item Type [road] :: Providing and laying bituminous concrete with 100- 120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading ,premixed with bituminous binder minimum @ 5.2 & 5.4 percent of mix and filler ,transporting the hot mix to work site ,laying with a hydrostatic paver finisher with sensor control to the required grade ,level and alignment,rolling with smooth wheeled ,vibratory and tandem rollers to achieve the desired compaction as per MoRTH Specifications Clause 507 complete in all respects for Grading-II(13 mm nominal size) Bitumen (VG-30) |
| 18 | Item Code [road 2025 4.6]:Item Type [road] :: Providing ,laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (PugMill), carriage of mixed material by tipper to site ,laying in uniform layers in sub-base/base course on a well prepared sub- base and compacting with smooth wheel roller of 80 to 100kN weight to achieve the desired density including lighting ,barricading and maintenance of diversion ,etc as per Tables 400-12&400-13 and MoRTH Specification Clause 406. By Mechanical Means with all lead |
| 19 | Item Code [road 2025 5.2 ii]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MoRTH Specification Clause 503. |
| 20 | Item Code [Unified BSR 2025 11.4.1 (1)]:Item Type [road] :: Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 toe wall Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysJul 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender