Tender For Repair/Replacement To False Ceiling, Wpt Treatment And Certain B/R Works In X Area At Afs Amla
Tender Value
20 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
20 days left
EMD
40000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Betul → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To False Ceiling, Wpt Treatment And Certain B/R Works In X Area At Afs Amla
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wall,display board /ceiling board fibre, pulp, insulation etc or insulation board /slab/wool of any thickness including cover fillets complete all as specified and directed. |
| 2 | M&L for 2nd class H W in timber scantling as in clean sawn with coating cresote oil including dismantling of timber scantling 40 sqcm and over in sec in any position un framed/framed work complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | S&F for mild steel work in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates ; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 5 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290 Gde-E-165 complete all as specified and directed. |
| 6 | S & F steel work Fe-410-W (Gde-E-250) quality-A, in roof trusses(framed) /purlins /crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats ,gusset plates etc complete all as specified and directed. |
| 7 | S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 8 | S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed. |
| 9 | M&L for two coats of interior emulsion/oil based distemper on wall newly plasterd surfaces over a coat of chalk white primer as in ceiling complete prepatation of new surfaces complete all as specified and directed. |
| 10 | Providing & fixing false ceiling of module size of 595 x 595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24 x 38 mm made from 0.27mm thick GI sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24 x 32 mm made of 0.27 mm thick sheet, 1200 mm long spaced between main \\"T\\" at 600 mm and center to center form a grid of 1200 x 600 mm and secondry cross \\"T\\" of length 60 mm and size 24 x 26 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200 x 600 mm panel to form grid of 600 x 600 mm and wall angle of size 19 x 19 x 0.35 mm and laying false ceiling tiles of approved texture in the grid main \\"T\\" runners to be suspended from ceiling using 2mm dia GI hanger including 4mm thick non asbestos fibre cement building boards fixed in ceiling flat or sloping to Aluminum frame work with screws complete all as specified and directed. |
| 11 | Material & Labour for cleaning of roof surfaces and applying a coat of oil base bituminous primer @ 0.30 lit per sqm including laying of APP based polymeric membrane weighing not less than 3.00 kg/ Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt,not less than 150gms/sq. m) land on primed surface by tension application with 100mm over lap travers and 150mm over lap longitudinal and finishing the surface by applying two coat of aluminum paint @ 0.20Kg /Sqm on each coat including taking down old treatment complete all as specified and directed. |
| 12 | Demolition cement concrete (unreinforced) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 13 | Material & Labour for providing cement concrete 30mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in padding on roofs slab to receive water proofing treatement, laid to required slope, finished fair and even complete all as specified and directed. |
| 14 | Supply only liquid water proofing chemical. |
| 15 | M&L for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:4 finished even and smooth without using extra cement with WPC 1% of cement content complete all as specified and directed. |
| 16 | Dismantling Asbestos cement corrugated or semi corrugated sheets as in roof covering complete all as specified and directed. |
| 17 | Fixing only 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with `L' type or `J' type or cranked hook bolts complete all as specified and as directed. |
| 18 | M&L for 6mm thick asbestos cement,corrugated or semi-corrugated sheet in roof,walls etc fixed with `L' type or `J' type or cranked hook bolts complete all as specified and as directed. |
| 19 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 20 | S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength 550 Mpa as in roof covering /cladding to wall /chhajja, fixed with self tapping screw complete all as specified and directed. |
| 21 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) , fixed with self tapping screws /J or L hooks complete all as specified and directed. |
| 22 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed. |
| 23 | M&L for brickwork with fly ash ,subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 24 | All as per item No.23 above but except brick complete all as specified and directed.Note : All type bricks retrieved from item No. 23 will be used. |
| 25 | Demolition of cement concrete reinforced of any description & any position and disposing of the rubbish materials in low lying areas of defence land complete all as specified and as directed. |
| 26 | M&L for steel reinforecement TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, hooking ends, binding with and including mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed. |
| 27 | M&L for Precast reinforced cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) in fire symbol board , shed no board including arrangement for fixing of hinges and fixtures as required; including attached plaster and buttresses complete all as specified and directed. |
| 28 | M&L for preparation of concrete and plastered suface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of any colour with a coat of primer etc as in kerb stone etc complete all as specified and as directed. |
| 29 | M&L for writing letters or figures (Block, roman, italic or indian) not exceeding 35cm height with thick synthetic enamel paint complete all as specified and directed. |
| 30 | Demolition of cement concrete ( un-reinforced) as in ground floor and paving not exc 15 cm thickness below or above GL complete all as specified and directed. |
| 31 | M&L for 100 mm thick PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate ), as in top layer , finished even and smooth without using extra cement including necessary form work complete all as soecified and directed. |
| 32 | M&L for forming 12mm thick expension joint by mechanical cutter filled with preformed bituminous filler board and top 30mm primed and sealed with sealing compound grade 'A' for thickness of concrete slab 100 mm thick complete all as specified and directed. |
| 33 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for . water troughs and the like including weathering, slightly rounded or chamfered angles and throating and demolition of existing concrete of any description complete all as specified and directed |
| 34 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified ad directed. |
| 35 | M&L for joint free Non - skid colour Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 36 | M&L for Non - skid colour Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in coloured cement to match of lighter shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 37 | All as per item No. 36 above but in vertical surfaces, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete all as specified and directed. |
| 38 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 39 | All as per item No. 38 above but in vertical surfaces, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete all as specified and directed. |
| 40 | M&L for digital glazed colour ceramic tiles in vertical surfaces 450 x 300 x 7/8 mm thick,etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles including 10mm thick backing coat in 1:4 cement mortor complete all as specified and directed. |
| 41 | M&L for glossy finished Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 42 | Demolition of cement concrete as in ground floor and paving not exc 15 cm thickness below or above GL ( unreinforced concrete ) complete all as specified and directed. |
| 43 | M & L for 40mm thick plain cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) as in sub base/floor finish complete all as specified and directed. |
| 44 | Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed. |
| 45 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed. |
| 46 | S&F PVC(SWR) 110mm dia S trap including connecting to out let with solvent cement complete all as specified and directed. |
| 47 | M & L in repairs for PVC nahani trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement of dia 75mm complete all as specified and directed. |
| 48 | S&F in repair 10 litre capacity vitreous china valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 49 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm fixed to pipes and valves complete all as specified and directed. |
| 50 | S&F in repairs vitreous china wash hand basin white flat back size 550mmx400mm excluding taps waste chain and plug and percelain stopper including two coats of synthetic enamel paint over coat of red oxide primer on exposed surfaces of breckets waste coupling brass CP 32 mm bore with long screwed shanks bedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks screwed and removing debris out of MoD land complete all as specified and directed. |
| 51 | Taking down GI/CPVC/UPVC tubing 15/16mm bore complete all as specified and directed |
| 52 | Supply and fix GI tubing 15mm bore medium grade with all fittings fixed to wall and ceiling complete all as specified and directed. |
| 53 | S&F in repairs 15 mm bore bib taps cast copper alloy with Chromium plated crutch or butterfly handle scrwed, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 54 | S & F in repair 15mm bore stop valves chromium plated screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions fixed complete all as specified and directed. |
| 55 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 56 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 57 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 58 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 59 | Supply & fixing in repair 600mm X 450mm bevelled edge mirror of selected quality glass , mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc. complete all as speciified and as directed. |
| 60 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed. |
| 61 | S&F 40mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed. |
| 62 | Taking down cement plaster on brick or stone works including taking out joints, hacking, of key and scrubing down with water complete all as specified and directed. |
| 63 | M&L for rendering 15 mm thick cement plaster , (10 mm thick backing coat in CM 1:6 and 5 mm thick in CM 1:4) on fair faces of brickwork or concrete finsihing even and smooth without using extra cement complete all as specified and directed. |
| 64 | M&L for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 65 | M&L for preparing new surfaces of walls and applying two coat of cement base paint over a coat of primer including use of scaffoldings complete all as specified and directed. |
| 66 | M& L for complete removal of existing treatment of walls and applying two coat of cement base paint, including cracks filling with exterior wall care putty where ever necessary and complete all as specified and directed. |
| 67 | M&L for Preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed. |
| 68 | M&L for prepatation of new surfaces two coats of interior emulsion on wall newly plasterd surfaces over a coat of primer complete all as specified and directed. |
| 69 | M& L for preparing of old decorative surface of walls and distempered with one coat of oil emulsion complete with cracks filling with care wall putty where ever necessary and complete all as specified and directed. |
| 70 | M&L for preparation of new steel surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide complete all as specified and as directed. |
| 71 | Taking down and refixing shutters of any description in same opening exceeding 1 Sqm and not exceeding 2 sqm each complete all as specified and directed. |
| 72 | M&L for complete removal and preparation of old steel surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide complete all as specified and as directed. |
| 73 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysJul 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender