Tender For special Repair/Upgradation To Auditorium Bldg At Army Public School, Provn Of Parking Shed At Echs & Other Minor Works At Ge Jhansi
Tender Value
26.66 Lakhs
Estimated cost
Bid Submission
27 Jul 2026
22 days left
EMD
53320
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jhansi → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair/Upgradation To Auditorium Bldg At Army Public School, Provn Of Parking Shed At Echs & Other Minor Works At Ge Jhansi
BOQ
| Sl. No. | Item Description |
| 1 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil. |
| 2 | Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth for oundation, etc or for shafts, wells cesspits manholes, pier holes, etc n exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil. |
| 3 | Excavation over area not exceeding 1.5 M in depth and getting out in any type of soil complete all as specified and directed. |
| 4 | Excavation over area exc. 1.5m but not exceeding 3.0 M in depth and getting out in any type of soil complete all as specified and directed. |
| 5 | Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point |
| 6 | Returnng, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm |
| 7 | M & L for PCC type D2 1:4:8 (40mm graded Aggr) in foundations, filling and mass Concrete. |
| 8 | M&L for plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in foundation filling, mass concrete and similar works and for MS Pipe fixing. |
| 9 | M&L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 using old size bricks complete all as specified and drctd. |
| 10 | M&L for green marble machine cut one piece as in window cill fixed with grey cement slurry including cutting and polishing complete. |
| 11 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or on concrete surfaces finished even and smooth (without using extra cement) with IWPC (IWPC measured and paid separately). |
| 12 | Supply only integral water proofing compound |
| 13 | M & L preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistance primer on newly plastered surfaces all as specified. |
| 14 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement. |
| 15 | M& L for applying two coats of OBD on walls over a coat of priming plastered and other surfaces with alkali resistant priming paint surfaces preparatory to destempering including preparing new surfaces plastered or unplasted of walls. |
| 16 | M&L for use and waste of form work to sides and soffits of floor or roof beams, lintles, cantlevers, shelves incl supports etc for rough finished surface of concrete. |
| 17 | M&L PCC 1:2:4 type B1 ( 20mm graded aggregate) as in lintle/bed plates and similar items all as specified. |
| 18 | M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips |
| 19 | All as per serial item No 18.00 herein before but MS deformed (TMT) 6 to 8 mm dia. |
| 20 | All as per serial item No 18.00 herein before but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders |
| 21 | M&L for MS framed structure roof trusses (framed), trussed, purlins, crane gantries and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed. |
| 22 | M&L for Steel work in tubular trusses & vertical post including special shaped washer etc using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 complete all as specified and directed. |
| 23 | M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 24 | M & L pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 25 | M&L for powder coated aluminium frame for doors/sliding channels/grills etc Aluminium sections for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed. |
| 26 | M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed. |
| 27 | M&L for powder coated aluminum window shutters, side hung type without sash bars, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 No), suitable handle (01 No), complete all as specified and directed. |
| 28 | S&F of sheet glass selected quality ( tinted type), 4.80 mm thick, each panes n. exc 0.5 sqm, suitable for aluminium / window/ Ventilators / door opening and similar work, complete all as specified. |
| 29 | S&F mortice lock of size 100mm, 4 lever type, duly fixed in aluminium door, complete all as directed. |
| 30 | M&L 4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equalflanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, duly fixed in ceiling frame work, Including demolition, complete all as specified and directed. Make :- as approved |
| 31 | M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified |
| 32 | M&L for laying and testing of 200mm dia RCC NP3 drain pipes and jointed in cement mortar and tested on completion all as specified and as directed. |
| 33 | M&L for 1:3:6 type C-2 concrete bed to drain pipe including packing under and haunching against the side of pipe after they are laid and tested of 250mm bore complete all as specifed and directed. |
| 34 | M&L for precast cement concrete (1: 2: 4) type B-1 using 20 mm graded stone aggregate as in drain/manhole covers, with plain fair faces including chamfers, weathering throttling etc and set in cement mortar (1:4) complete with joint to match including necessary form works complete all as specified and directed. |
| 35 | M&L for brick work with sub straight or curved on plan exc 6m mean radius, built in curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 36 | M&L for aggregate for loose filling of gauge 40mm to 80mm graded as in floor filling all as specified. |
| 37 | M&L for 50mm thick sand cushioning, including watering and consolidation, complete all as specified and directed. |
| 38 | M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, including in CM (1:3) in edges of pavers, complete all as specified and directed. |
| 39 | M & L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of floor. |
| 40 | M&L for preparation of newly plastered surface of walls and applying three coats of whie wash complete all as specified. |
| 41 | M&L for spreading and levelling in layers n.exc 25cm thick and well ramming including watering as required complete all as specified and directed. |
| 42 | Surface dressing n.exc 15cm deep in soft/loose soil complete all as specified. |
| 43 | M&L hardcore of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface in broken stone or boulders. |
| 44 | M&L for 40mm thick cement concrete type B-1 1:2:4 (using 20mm graded aggregate) complete all as specified. |
| 45 | M&L for 75mm thick cement concrete type B-1, 1:2:4 ( 20mm graded aggreagte ) complete all as specified. |
| 46 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil. |
| 47 | M & L for Providing, cement concrete type B0 1:2:4 (using 12.5mm graded grinite stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, coping etc complete |
| 48 | Dismentling of wall and ceiling board (fibre, pulp, insulation etc.) or insulation board/ slabs/ blankets, any thickness, including cover fillets. |
| 49 | M & L for 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site all as per specifications and drawing |
| 50 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. |
| 51 | M&L for Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fastners 12.5mm dia. 40mm long complete all as specified. |
| 52 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to Centre.. |
| 53 | M&L 4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws (Frame work for ceiling shall be measured and paid separately) |
| 54 | M&L for 4.50mm thick linoleum, plain coloured, laid dry on exisiting kota stone floorsby levelling including stretching, cutting and fitting and sealed down with an approved adhesive complete all as specified and as directed. |
| 55 | Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar, and disposal complete all as specified and directed. |
| 56 | Dismantling stone slabs and tiles of any description or thickness laid , bedded and pointed in any mortar as in floors, aprons etc. disposal complete all as specified and directed. |
| 57 | M&L for ceramic colour tiles in vertical surface of size 350 X 250 x 7/450x300x7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed. |
| 58 | M&L for Non-skid colour ceramic tile tiles joint free 8 to 10 mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:6 over brushing neat cement slurry etc complete all as speciefied and directed. |
| 59 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening primer, over a layer of (JK/Birla) 3.0 mm thick wall care putty to get smooth and level finish, complete all as specified and directed. |
| 60 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. |
| 61 | M&L for Point wiring with 1.5 Sqmm FRLSH insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLSH insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with brass /GI screws for mounting switches, sockets, fan regulator, etc. complete all as specified and directed by Engineer-in-Charge for the following points:- |
| 62 | One light point controlled by one switch |
| 63 | S&F of switch piano type, single pole, one way, 6 amps, 240 volts, complete all as specified and directed. |
| 64 | S&F of Ceiling rose, three terminals, bakelite body, 240 volts, complete all as specified and directed. |
| 65 | Supply and fix wall mounted fan, 400 mm sweep, 1350 RPM . Air delivery 65 CMM, three blade, Adjustable upward and downward tilt mechanism, motor proection with thermal overload protection and auto-resetting, 230V complete all as specified and directed by Engineer-in-Charge. |
| 66 | Supply and fix LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 67 | Supply and fix LED lights, aluminium housing with adjustable mounting spot light 10 watt complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 68 | Supply and fix LED lights, aluminium housing with adjustable mounting spot light 10 watt complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysJul 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender