Defence Statutory Bodies & Commissions/Committees Closing in 20 days TDR #56299084

Tender For special Repair / Replacement Of Old Unserviceable Earthing And Lightening Arrestors Under Ge (Af) Tech Area At Af Stn Agra

Issued by Statutory Bodies & Commissions/Committees · Agra, Uttar Pradesh
Tender Value
38.79 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
20 days left
EMD
77600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for special Repair / Replacement Of Old Unserviceable Earthing And Lightening Arrestors Under Ge (Af) Tech Area At Af Stn Agra

BOQ

Name of Work:- SPL REPAIR / REPLACEMENT OF OLD UNSERVICEABLE EARTHING AND LIGHTENING ARRESTORS UNDER GE (AF) TECH AREA AT AF STN AGRA
Sl. No. Item Description
1Dismantling / taking down old unserviceable earthing pit any type/any size including necessary excavation and earth work and demolishing the pits and retrieved the scrap for considering in to credit schedule complete all as apecified and directed.
2S&F in repair of Copper strip of size 20 x 3 mm earth continuity conductor or main earthing lead, fixed to wall on DMC type insulator or recess or chases or buried in ground or drawn in conduit / pipe etc complete all as specified and directed.
3S&F in repair of Copper strip of size 32X6 mm earth continuity conductor or main earthing lead fixed to wall on DMC type insulators or recess or chases or buried in ground or drawn in conduit/pipe etc. complete all as specified and directed.
4M&L for brazing/welding of earthing electrode/strip of any type and size complete all as specified and directed.
5S&F in repair of aluminum strip 25 x 3 mm with porcelain insulator and fixing screws etc. on roof/wall and connecting to test point etc complete all as specified and directed.
6S&F in repair galvanised iron strip of size 50 x 6 mm with saddles/ on DMC type insulators and fixing screws etc. for roof conductors and down conductors or buried in ground complete all as specified and directed.
7S&F in repair galvanised iron strip of size 32 x 6 mm with saddles/ on DMC type insulators and fixing screws etc. for roof conductors and down conductors or buried in ground complete all as specified and directed.
8S&F in repair of Air termination, single pointed copper rod 12mm dia and 300mm long complete all as specified and directed.
9S&F in repair of Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled screwed including 3 Nos, 8mm dia, 25mm long hex head screw complete all as specified and directed.
10M&L for earthing pit of PCC (1:3:6:) type C-1 (using 20mm graded stone aggregate) size 550x550x300mm with base 40mm of PCC including wiremesh funnel , AI Frame of size 25x25x3mm at top of Pit to place the cover fixing and placing the pit in existing place with necessary excavation and disposal of old broken pit including all necessary earth work complete all as specified an directed.
11M&L for rough dessed Dholpur stone 40mm thickness as a earthing pit cover of size 30x30Cm with 12mm MS rod as a handle to lift the cover including necessary cutting, dressing complete all as specified and directed.
12S&F in repair 40 mm dia GI tubing light grade with all fittings such as tee, bend, elbow, reducer, socket etc for earthing lead protection of under ground /on wall etc complete all as specified and directed.
13S&F in repair 50 mm dia GI tubing light grade with all fittings such as tee, bend, elbow, reducer, socket etc for earthing lead protection of under ground /on wall complete all as specified and directed.
14S&F in repair 80 mm dia GI tubing light grade with all fittings such as tee, bend,elbow,reducer, socket etc for earthing lead protection of under ground /on wall complete all as specified and directed.
15Cutting chases, pinning in making good to facings where required and pointing in cemant mortar 1:3 to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc; and cutting chases for concealed conduit wiring,etc, and making good in brick wall/RCC, cutting not exc 10 cm girth complete all as specified and directed. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs)
16Cutting chases, pinning in making good to facings where required and pointing in cemant mortar 1:3 to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc; and cutting chases for concealed conduit wiring,etc, and making good in brick wall/RCC, cutting not exc 10 cm girth complete all as specified and directed. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT 1. All worn out/unserviceable materials/items which will be obtained from different items of Sch `A’/ BOQ (as mentioned above) during replacement work, shall become contractor’s property and amount of credit shall be recovered from the contractor's RAR & final bill as and when payments are submitted. These materials shall be allowed to be removed from works site only after credit amount for the same is recovered from the contractor’s payment. Items not covered under this Schedule shall become the property of department and the same shall be returned/ deposited by the contractor at MES store yard without any extra cost to department/ government and all materials which are credited to the contractor, shall be recorded in MB 2. The contractor shall have no claim regarding fixation of credit rates in this schedule and no rebate on \\"Schedule of credit\\" rates/ amount shall be accepted. However contractor can offer more credit rates/ amount. 3. The total credit amount may vary as per execution of work above different items involved in this credit schedule. 4. The quantities given in column 4 are provisional and same shall be measured and paid based on actual quantities obtained against relevant items of Schedule ‘A’/ BOQ. These materials shall not be reused/ reincorporated in the work except where specified. 5. The measurements of dismantled materials shall be the gross quantity obtained and not the net quantity considered for payment in schedule. The old and unserviceable materials to be retrieved from taking down/demolition/dismantling etc are considered in schedule of credit. No claim of contractor with regard to quality/position of old materials shall be entertained Srl No Description of item Qty Unit Assessed rate by department Remarks Rate in (Rs) Amount in (Rs)
17 Total amount of credit schedule 64400.0 Signature of contractor AGE (Contracts) For ACCEPTING OFFICER

AI Tender Summary

OUR REF NO 56299084
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.79 Lakhs
LAST DATE 25-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for special Repair / Replacement Of Old Unserviceable Earthing And Lightening Arrestors Under Ge (Af) Tech Area At Af Stn Agra
Basic Detail
Tender No 8200-1831/E8
Bidding Type Tender
Location
City Agra
State Uttar Pradesh
Key Dates
Publish Date 04 Jul 2026
Submission Date 25 Jul 2026
Open Date 31 Jul 2026
Finance
Tender Value 38.79 Lakhs
Tender Fee 500
EMD 77600
Exemption Available
Document List
1831Tender.pdf
8b51bcfa-bc6b-41d4-9bca-bad8b171b52b.html
BOQ_869405.xls
Tendernotice_1 (2).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 20 days
Jul 31, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 26 days

Tender Documents

Download All (ZIP) ↓
pdf

1831Tender.pdf

html

8b51bcfa-bc6b-41d4-9bca-bad8b171b52b.html

xls

BOQ_869405.xls

pdf

Tendernotice_1 (2).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders