Tender For Provn Of Ascon, Radio And Lines Store Size (18 Mtr X 7 Mtr) With Attached Toilet And Lightning Arrester At Tx Nfs At Mil Stn Pithoragarh Under Ge(Mes) Pithoragarh.
Tender Value
34.33 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
20 days left
EMD
68700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Ascon, Radio And Lines Store Size (18 Mtr X 7 Mtr) With Attached Toilet And Lightning Arrester At Tx Nfs At Mil Stn Pithoragarh Under Ge(Mes) Pithoragarh.
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Excavation in trenches not exceeding 1.5m wide and not 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed by Engr-In- Charge. |
| 3 | M&L for providing plain cement concrete 1:4:8 type D-1 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engr-In- Charge. |
| 4 | M&L RCC (Nominal mix) 1:1.5:3 ( 20 mm graded aggregate) as in Columns, pillars, piers, posts, beams, isolated footings .lintel, cantiliver slab etc. |
| 5 | M&L Formwork (square rough finished surface of concrete) to sides of pillars, posts, struts, piers, columns , beams, footings, sides and soffits of suspended/cantiliver slab etc. |
| 6 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 7 | Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 8 | M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10 cm in width, 25 cm in depth, 15cm in height and setting in mortar 1:6 completed all as specified and direceted . |
| 9 | M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement complete all as specified and directed. |
| 10 | M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair. Complete all as specified and directed. |
| 11 | M&L for hardcore broken stone boulders broken to guage n exec 63 mm all as spd and directed |
| 12 | M&L for PCC 75 mm thick 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floors, footings etc, complete all as specified and directed. |
| 13 | M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over incl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6. Complete all as specified and directed. |
| 14 | M&L Machine Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 10 mm thick rendering on brick surface in CM 1:4. |
| 15 | M&L for 20mm thick marble (makrana white) tiles machine cut in skirting/dado/ border laid over and including cement screed 20 mm thick in CM 1:6 and jointed with grey cement slurry including cutting and polishing . |
| 16 | M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match the shade, including dismantling tile complete all as specified and directed |
| 17 | M & L, Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match ,complete all as specified and directed. |
| 18 | S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etc fixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge |
| 19 | M&L Plates (plain or chequered) channels Fe 410-W (Gde E-250) quality B. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed. |
| 20 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer incl preparation of new steel surface complete. |
| 21 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n.exc 10 cm long and 16 to 20mm diameter of neck |
| 22 | M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting, complete all as specified and as directed. |
| 23 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 24 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 25 | Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed by Engr-In- Charge. |
| 26 | Removing excavated material not exceeding 50M and depositing where directed at a lavel not exceeding 1.5m above the starting point, soil complete all as specified and directed by Engr-In- Charge. |
| 27 | M&L 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection and finishing even and smooth without using extra cement incl making joints 12 mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compund grade 'A' incl necessary formwork. Complete all as specified and directed. |
| 28 | M&L for preparing new plastered surfaces of walls and applying two coats of Oil bound distemper on walls over a coat of primer, complete all as specified. |
| 29 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Complete all as specified and directed. |
| 30 | S&F steel windows/ventilator with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, Complete all as specified and directed. |
| 31 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed. |
| 32 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 33 | S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 34 | M & L PCC 1:3:6 Type C 0 usind 12.5 mm graded stone aggregate for backing of door chawkhats complata all as specified and directed by Engr-in Charge |
| 35 | S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides |
| 36 | S&F IInd class hard wood, 30mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkahts. Complete all as specified and directed. |
| 37 | M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 38 | S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 39 | S&F Aluminium annodised barrel tower bolt of extruded section and fixed 200 mm size with bright bolt complete all as specified and directed. |
| 40 | S & F 250mm Aluminium alloy anodised sliding door bolts with hasp,staple(bolt type)and fixing clips of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or aluminium alloy and fixed. |
| 41 | S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks, hole fast and similar work confirming to Fe -290 Gde-E-165 all as spd and directed . |
| 42 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 43 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed |
| 44 | S&F 500 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position ,complete all as specified and directed. |
| 45 | S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed |
| 46 | S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed |
| 47 | M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good complete all as specified and as directed |
| 48 | Supplying and laying of CPVC pipes (outer dia 20 mm) SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 49 | S&F CPVC brass elbow for CPVC pipe size 20 mm |
| 50 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 51 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 32 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 52 | S&F vitreous chinaware coloured wash hand basin with pedestal of size 55X40 cm complete including fancy CP pillar tap, CP brass waste coupling ,waste pipe including fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. |
| 53 | S&F PVC (SWR) pipes 75 mm bore dia single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 54 | S&F PVC (SWR) pipes 110 mm bore dia single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 55 | S&F PVC (SWR) junction single, (Single T) 110 mm boreequal or unequal |
| 56 | S&F PVC (SWR) door bends 75 mm size any radius |
| 57 | S&F PVC (SWR) bends, reducers 110 mm size any radius |
| 58 | PVC (SWR) 'P’ trap 110 mm size |
| 59 | PVC (SWR) vent cowl size 75 mm |
| 60 | PVC (SWR) floor trap (outlet dia 75 mm ), plain with grating including jointing with solvent cement |
| 61 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cupwashers, Complete all as specified and directed. |
| 62 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.\\" |
| 63 | S & F 15 mm dia chromium plated angle cocks/stop valves, brass, screwed down, high pressure with crutch or butterfly handle, flench screwed both ends for iron pipe or for union complete all as specified & directed. |
| 64 | S&F PVC connection of 45 cm length including brass nuts complete all as specified and as directed |
| 65 | S & F vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover and flushing pipe complete all as specified & directed. |
| 66 | S&F PVC valveless, syphonic action type, flushing cistern(10 ltr capacity) low level, white, with inlet, ball valve, float and handle including brackets |
| 67 | Material and labour for point wiring with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of 20mm dia or more along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including chicken wire mesh , and pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface all as specified and as directed for the following;-. |
| 68 | All as per item No-66 here -in- before but for One light point controlled by one switch |
| 69 | All as per item No-66 here -in- before but for One one ceiling fan point controlled by one switch |
| 70 | All as per item No 66 here -in- before but for One one Exhaust fan point controlled by one switch |
| 71 | All as per item No 66 here -in- before but forOne 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch |
| 72 | All as per item No 66 here -in- before but for One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch |
| 73 | All as per serial item No 66 here in before but with 4 Sqmm nominal cross sectional area copper conductor cable for one 15 Amps socket outlet point on independent board with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, sheathed and connected to common earth and earth dolly complete all as specified and directed |
| 74 | Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified.. |
| 75 | Supply & fixing switch piano flush type, 15 /16 Amps single pole, one way 240 volts complete all as specified . |
| 76 | Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified. |
| 77 | Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified. |
| 78 | Supply install testing and commissioning of 1200mm sweep 230 volts AC ceiling fan ,rating confirming to IS 374:2019, 3 blade down rods, electronic regulator and accessories,min air delivery 210 CFM with service value 6.0 BEE , five star rated with brushless direct current motor (BLDC) including making connection with three core 1.5sqmm flexible copper cable upto ceiling rose complete. |
| 79 | S&F Lamp holder, insulated body with back plate suitable for batten /angular fittings, fixed on with & including round block 8 cm dia, 4 cm depth, closed recessed type & making connection including inverter LED lamp, 6500K, 900lm in white colour of 12 Watt, etc complete all as specified & directed. |
| 80 | S&F ceiling rose, surface bakelite, AC, 220/240 volts, 3 terminals, complete all as specified and directed. |
| 81 | Supply and fix of Tube light fitting integrated type suitable for LED 20 W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 82 | Supply and fix of Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. |
| 83 | S&F for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, multi stranded, Fire Retardant conforming to IS 694-1990, PVC insulated, unsheathed, copper conductor stranded cable FRLS with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core including rigid non metallic PVC concealed conduit of 25 mm dia or more , medium grade with all conduit accessories/ fittings ,brass screws, washers etc and connected to common earth dolly including all cutting/ chases etc in wall, making good to walls etc including two coats of white/ colour washing/distempering etc to the disturbed surfaces to match the existing complete all as specified & directed |
| 84 | Supply and fix factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper tinted bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623. |
| 85 | Supply and fix factory made epoxy powder coated Distribution board SPN 4 ways (SPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper tinted bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and confirming to IS : 8623. |
| 86 | Supply and fix factory made epoxy powder coated Distribution board vertical TPN 4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper tinted bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one 4 pole MCB 100 Amps as incomer and SP /TP MCBs outgoing complete all as specified and confirming to IS : 8623. |
| 87 | Supply & fix MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 88 | Supply & fix MCB, DP, AC, 240 volts of 50 to 63 Amps capacity 10KA, 'C' series and making connections with suitable size of copper lugs complete all as specified & directed. |
| 89 | Supply & fixing MCB 4 pole 'C' series 100 amps capacity AC 415 V,10kA complete all as specified and directed . |
| 90 | Supplying and fixing LED bulk head light fitting wall mounted with Environmental friendly, ultra modern, energy saving, surface mounted, decorative type, back-lit LED luminaire comprising of high brightness LEDs.built edge lit with inverter LED lamp, 6500K, 900lm in white colour of 10 Wattcomplete with all acessories all as specified and directed by Engr-in-Charge. |
| 91 | S & F 1x60 watt LED building security light fitting , PDC housing,IP-65 with 4 KV inbuilt surg protection driver, pressure die-cast aluminium including fixing the same on GI pipe 25 mm dia bore light grade bracket, 1.5 mtr long including necessary cutting / bending /welding and fixed the same with two Nos FI clamps of 40x 4mm duly painted and suitable size of nut & bolts etc. and making electric connection with PVC three core copper flexible wire complete all as specified and directed. |
| 92 | Supply and fixing of fresh air fan, single phase 230/240 V OF size 200 mm sweep 1100 RPM, Min air delivery 210 CMH,24 W with suitable louvers and making connections with twisted copper flexible wire including cutting hole for exhaust fan to wall and making good the disturbed surface ( including making holes in walls , plastering ,necessary brickwork and distempering ) to match with existing specification connecting electrically using PVC insulated flexible copper conductor cable over all sheathed complete all as specified and directed. |
| 93 | Material and Labour for earthing complete with galvanized steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 m deep below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in earth plate No 3 of MES schedule 2009 part – I connected to earthing test point including earth continuity conductor and loop earthing etc. as required 4 mm dia galvanized iron or steel wire including necessary excavation and earth work, concrete pit & chamber in PCC 1:2:4 type B1 & pit cover 75mm thck in RCC 1:2:4 type B1 duly reinforced with 6mm dia bar @ 150 c/c both ways including with lifting handle and Earth lead and GI protection pipe light grade 15 mm dia beyond 7.5 mtr from electrode to earth terminal point /main switch board and 20mm bore GI watering pipe medium grade including ' test point terminal complete all as specified and directed. |
| 94 | M&L Air termination, single pointed aluminium rod 12 mm dia and 300mm long complete all as specified and directed. |
| 95 | S&F Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed. |
| 96 | M&L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex. Head screw complete all as specified and directed. |
| 97 | M&L Earth continuity conductor or main earthing lead fixed to wall/ roof on batten/insulator or recess or chases or buried in ground or drawn in conduit/ pipe/insulator or fixed to roof/wall or any other indicated situation for loop earthing etc. as required 25x3mm dia aluminium strip complete all as specified and directed. |
| 98 | Supply and fix galvanized iron tubing light grade size 40mm complete all as specified and directed |
| 99 | M&L for Earthing complete with galvanised iron earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to aluminium strip 25x3 mm size by mean of nut/bolt and washer of copper as shown in electrical plate no 5 of SSR part I including necessary excavation and earth work GI pipe 20/30mm dia light grade for watering etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, including testing complete. |
| 100 | S&F , laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 4 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed. |
| 101 | M & L Sand cushioning to UG cables (8cm deep before laying of cable and 15 cm deep over the cable). Note :- Punned thickness only will be considered for payment. |
| 102 | M & L Bricks for protection cover to under ground cable (with standard size 230mmx115mm x75mm fly ash bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10mm as directed. |
| 103 | Supply and Fixing of 40mm GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on wall with and providing clamps etc complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender