Tender For Maintenance/ Cleaning Of Ug Sumps, Filtration Plants, Disinfectors, Filter Media And Mixing Of Water Disinfectants Material Including Connected Item Of Work At Mil Stn Pithoragarh, Devkatiya Under Ge Pithoragarh
Tender Value
40 Lakhs
Estimated cost
Bid Submission
25 Jul 2026
17 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pithoragarh → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance/ Cleaning Of Ug Sumps, Filtration Plants, Disinfectors, Filter Media And Mixing Of Water Disinfectants Material Including Connected Item Of Work At Mil Stn Pithoragarh, Devkatiya Under Ge Pithoragarh
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | M&Lfor one coat of synthetic enamel paint over conceret or steel surfaces incl preparation of old surfaces complete all as specified and directed (Note- Shed of paint as directed by Engineer-in-Charge). |
| 3 | M & L for one coat of water epoxy (solvent free) paint to internal walls with spray machine including preparation of old surfaces of by rubbing with sand paper complete all as specified and directed. ( Make of Epoxy paint - Asian Paints Apcod CF 650, / Berger Epilux610 SF/Shalimar Potable Water Epoxy) |
| 4 | M&L for taking out old existing unserviceable Filter Media aggrigates including depositing up to 50 mtr where directed by engr-in-Charge and supply and laying filter media aggregate of size 700 to 800 micron mm size complete all as specified and directed. |
| 5 | Taking out old Carbon ID and Supply and lay fresh Activated carbon ID 800 for Color, smells & Excess chemical complete all as specified and directed. Note: (Contractor shall produced the purchase voucher of Activated carbon before claiming the payment against this item) |
| 6 | M&L for cleaning of 3,00,000 gallons capacity RCC ground water tank/ clarifying cum sedimentation tank, water tank by pumping out all dirty water, removing stone pieces and sludge ,scrubbing of dirt & plant from floor & well by rubbing with wire brushes and removing all waste to distance not exc 50 mtr and depositing where directed. cleaning inner surface of tank. complete with in 12 Hrs incl writing date of cleaning on external surface of tank by using synthetic paint after scraping off old date complete all as specified and directed. |
| 7 | All as per Item No 5 above but 2,50,000 gallons capacity |
| 8 | All as per Item No 5 above but 2,00,000 gallons capacity |
| 9 | All as per Item No5 above but 1,50,000 gallons capacity ground water tank |
| 10 | All as per Item No 5 above but 1,00,000 gallons capacity ground water tank |
| 11 | All as per Item No 5above but 60,000 gallons capacity ground water tank |
| 12 | All as per Item No 5 above but 50,000 gallons capacity ground water tank |
| 13 | All as per Item No 5 above but 2,50,000 gallons capacity water clarifying cum sedimentation tank including Flocculator rotating blades complete. |
| 14 | All as per Item No 5 above but 28,000 gallons capacity flow water tank including rotating blades complete. |
| 15 | All as per Item No 5 above but Water storage tank in two compartment 2000 Gallons capacity at Shiv dhara source. |
| 16 | M&Lfor surface excavation nexc 30 cm and average 15 cm depth in faul poistion/ in muddy or semi liquid state and desposing off the excavated earh/ green vegitable/ garbage etc not exc 250 mtr where directed by engr-in-Charge . |
| 17 | Material and Labour for cleaning (taking out mud, grass & bushes etc) of ponds near main source of size approx 45mtr x 20 Mtr at Golf pump house complete all as directed . |
| 18 | Cleaning of valve pit chamber of any size by taking out mud and muddy water and depositing the same at a distance not exceeding 20 meter away from pit including swiping free from any type of dirt including rectification the leakage of valve of any size by using gland of appropriate size and required packing materials as directed at site. |
| 19 | M&L for removing of grass/cutting of bushes , small trees at water supply installations/where directed as per requirement and disposal of the same at a distance not exceeding 50 mtr all as directed. |
| 20 | M&L for cleaning of chamber of Alum/Lime of size 1.2 mtr. x1.2 mtr.x1.2 mtr deep-02 Nos Alum and 02 Nos Lime chamber with complete dismantling of agitator gear assembly and refixing the same after cleaning of chamber with wire brushing complete. |
| 21 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 M. deep for foundation or for laying of pipes etc and getting out in hard/dense soil, comlete all as specified and directed |
| 22 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed. |
| 23 | Removing excavated soil to a distance exceeding 50m but not exceeding 250 m and depositing where directed at a level not exceeding 1.5 m above the starting point , complete all as specified and directed. |
| 24 | Disconnecting and taking up or down steel water tubing and connections for 15 mm dia bore size complete all as specified and directed. |
| 25 | All as per Item No 23 above but size 20 mm bore |
| 26 | All as per Item No 23above but size 25 mm bore |
| 27 | All as per Item No 23 above but size 40/50 mm bore |
| 28 | All as per Item No 23 above but size 80 mm bore |
| 29 | All as per Item No 23 above but size 100 mm bore |
| 30 | S&F 15 mm bore GI tubing medium grade complete with all fittings laid in trenches/ walls all as specified and directed. |
| 31 | All as per Item No 29above but size 20 mm bore. |
| 32 | All as per Item No 29 above but size 25 mm bore. |
| 33 | All as per Item No 29 above but size 40 mm bore. |
| 34 | All as per Item No 29 above but size 50 mm bore. |
| 35 | All as per Item No 29 above but size 80 mm bore. |
| 36 | All as per Item No 29 above but size 100 mmbore. |
| 37 | S&F in repairs of 15 mm bore Gun metal gate valve screwed both end with iron head wheel complete all as specified and directed. |
| 38 | All as per Item No 36 above but 20 mm bore. |
| 39 | All as per Item No 36 above but 25 mm bore. |
| 40 | All as per Item No 36 above but 40 mm bore. |
| 41 | All as per Item No 36 above but 50 mm bore. |
| 42 | Material and Labour for cutting of road not exceeding 50 cm wide and 100 cm depth for repair of pipe line and making good the disturbed road with PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed. |
| 43 | Material and Labour for repair leaking joint of 150 mm bore of spigot and socket pipes and fittings and taking out lead and other joint materials and making new lead joint with new jointing materials like spun yarn and additional quantity of lead as reqd at site to stop leaking complete all as specified and directed. |
| 44 | All as per Item No 42 above but 100 mm bore |
| 45 | All as per Item No 42 above but 80 mm bore |
| 46 | Material and Labour for repair of leaking joints for 150 mm bore of pipe by applying welding on both sides or by socket/flanged/ angle to stop the leakage and arranging welding set at site of work and testing on completion including earth work all complete all as specified and directed. |
| 47 | All as per Item No 45 above but 100 mm bore |
| 48 | All as per Item No 45 above but 80 mm bore |
| 49 | S&F in repairs 80 mm dia Sluice valve both end flanged class PN-1.6 complete with Steel spindles check nut CI wheel including all fixing arrangements complete all as specified and as directed. |
| 50 | All as per Item No 48 above but 100 mm dia |
| 51 | All as per Item No 48 above but 150 mm dia |
| 52 | Taking out brass spindles of sluice valve for remetaling /regrinding complete as required and refixing the same in position of size 80 mm dia complete all as specified and as directed. |
| 53 | All as per Item No 51 above but 100 mm dia |
| 54 | All as per Item No 51 above but 150 mm dia |
| 55 | S&F in repairs cast iron non return valve 100 mm PN10, ISI marked, both end flanged complete with jointing materials such as rubber gasket, nut & bolts with suitable washer complete all as specified and as directed. |
| 56 | All as per Item No 54 above but 150 mm dia PN16 |
| 57 | S&F in repairs mild steel work grade FE-290, E-165, unmachined in brackets gully trapes, grating, railing, chamber covers, dampers, stop valve boxes and similar articles including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 58 | S&F in repairs 100 mm bore CI foot valve one end flanged other end stranier, ISI marked , Ball/NRV type with and including necessary nuts, bolts & rubber gasket complete all as directed. |
| 59 | S&F in repairs150 mm bore CI foot valve one end flanged other end stranier, ISI marked , Ball/NRV type with and including necessary nuts, bolts & rubber gasket complete all as directed. |
| 60 | M&L in repairs for leaking joint by rubber tyten joint for 150mm bore spigot & socket DI pipes and fitting completion including earth work complete all as specified and directed. |
| 61 | M & L for repairs to existing leaking joints (flanged/socketed /collar) for 100/150/200 mm bore GI/CI/DI pipe line including supply and replacement of flanged/socket/union/reducer etc with and including all necessary nut bolts, fibre/rubber gasket sheet and to make threading wherever required, to make the joints leak proof including necessary cutting threading etc,and testing on completion including earth work complete all as specified and directed. |
| 62 | S&F in repairs of CI/DI fittings & fixtures any size ie Bends(any radius),Tee,tails piece,flange etc all as directed by Engr in- Charge |
| 63 | S&F in repairs dead nut size 15/20 mm dia bore complete all as specified and directed. |
| 64 | S&F in repairs cast iron bib taps screwed for iron pipe 15 mm dia all as specified and directed. |
| 65 | S& Fix in replacement cast iron bib taps screwed for iron pipe 20 mm dia all as specified and directed. |
| 66 | Material and Labour for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in Foundation of Pumps or pillar/Thrust block for supporting of pipe including necessary form work complete all as specified and directed. |
| 67 | S&F in repairs of 150 mm dia Butter fly valve CI class PN-1.6 including all fixing arrangements complete all as specified and as directed. |
| 68 | All as per Item No 66 above but 100 mm dia bore |
| 69 | All as per Item No 66 above but 80 mm dia bore |
| 70 | All as per Item No 66 above but 50 mm dia bore |
| 71 | All as per Item No 66 above but 40 mm dia bore |
| 72 | S&F in repairs of Sluice valve Cast Steel 150 mm dia, Class 150, Double flanged/ butt weld end, outside crew rising stem , Yoke type bonnet, back seat bush arrangement to enable repacking under pressure non rising type complete with Steel spindles check nut CI wheel including all fixing arrangements including alteration work in pipe line complete all as specified and as directed. |
| 73 | S&F in repairs of Sluice valve Cast Steel 150 mm dia, Class 300, Double flanged/ butt weld end, outside crew rising stem , Yoke type bonnet, back seat bush arrangement to enable repacking under pressure non rising type complete with Steel spindles check nut CI wheel including all fixing arrangements including alteration work in pipe line complete all as specified and as directed. |
| 74 | Dismanteling of existing valve chambers and removing the demolished materials to a distance not exceeding 50 m and Material & Labour for reconstruction of the same (internal size 950x950x950 mm) with PCC 1:3:6 type C-1 using 20 mm graded stone aggregate solid blocks masonry set in CM 1:6 with PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in foundation, PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring bed & copping and applying 15 mm thick cement plaster in cement mortar 1:4 mixed with water proofing compound as per manufacturers instruction on the inside of valve pit & valve pit cover made out of 3mm thick mild steel sheet with 40 x 40 x 5 mm angle iron frame and 40 x 5 mm mild steel hold fast embedded in PCC including two coats synthetic enamel paint blue over a coat of red oxide primer etc complete all as specified and directed. |
| 75 | M & L for petty repair to water supply network of upto 50mm bore pipe line for stopping leaking by providing new GI union, socket, Tee , elbow, bends, nut bolts, washers or welding etc and to make threading as required at site and testing on completion including earth work complete all as specified and directed. |
| 76 | Supply & mixing of calcium hyphoclorite granular from with chlorine content of 65 % to 70 % in sealed packing for pre chlorination and post chlorination for dosing /filling in drinking water as per following generic specification complete all as specified all as direected. (a) available chlorine min - 65 % by mass (b) Partical size ( passing through 1.70 mm IS sieve ) Min - 99% by Mass (c) Water insoluble matter max - 6 % (d) calcium Hudroxide max - 4 % (e) Sodium Chloride Max - 15% (f) loss of chloride of basis avaible chloride max -1/15) |
| 77 | Supply & mixing of ferric Alum grade -IV as per IS-299 :2012 in sealed packing commercial for dosing / filling in drinking water as per standard parameters as specified and rate of dosing as per standard parameters complete all as specified and directed. |
| 78 | Supply & mixing fat lime, unslacked, class 'C' , complete all as specified and directed.NOTE: Fat lime, unslacked not more than 2 months old packing. |
| 79 | Supply & mixing stable bleaching powder conforming to IS - 1065, grade - I in 25 Kg packing, packed in polyethylene bag (not more than 2 months old packing), complete all as specified. |
| 80 | Supply & filling of liquid chlorine gas, confirming to IS 646, dully filled in 100/120 Kg capacity cylinder issued by the Department for refilling including sealing the cylinder after filling and transportation from store yard to work site and back to MES store yard at Pithoragarh complete all as specified and directed.Note: - (a). Empty gas cylinders shall be provided by the department' for filling chlorine gas only. (b) Weight of gas in each cylinder shall not be more than 105 Kgs in 120 Kgs capacity of gas cylinder and 90 Kg in 100 Kg capacity of gas cylinder considering the safety factor. (c) Testing of empty gas cylinder of any capacity issued by Department like hydro-static stretch test & leakage cum pressure test before filling the chlorine gas alongwith test certificate from competent authority |
| 81 | Testing of water samples for drinking water of main pump house No 01,02 , MES DAM and MD Accn for conducting physical & biological test as per IS 10500:2012 all as per specified & directed. |
| 82 | Disconnecting and taking up or down CI Pipe and connections for 150 mm dia bore size complete all as specified and directed. |
| 83 | S&F ductile iron pipe (K-7), socket and spigot end, as per specifications (IS-8329) with internal cement mortar lining and external bitumen coating for portable water supply with rubber ring joints, including cost of rubber rings as per IS:5382 (1985), giving satisfactory hydraulic field testing and commissioning as per Technical specification etc complete of 150mm dia complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysAug 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender